My Favorites display on my desktop PC but not on my laptop

Similar Questions

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  How can you do recent items don't forget these past .avi and .wmv files

  Hello

  You can change some values in the registry. To do this, copy / paste the following text in Notepad, save it as a MP3WAVRecent.reg file and double-click this file to add it to the registry database:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.MP3]
  "EditFlags" = hex: 00, 00, 01, 00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.WAV]
  "EditFlags" = hex: 00, 00, 01, 00

  Note that plus save recently used for the Jumplist instead of frequently used must be checked in the Options of WMP - player, as well as the music at the bottom of life private tab.
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  What version of OS are you using? If you run El Capitan, he won't work except in the latest LR6 and CC. Libraries attach Nikon used until 2015.3 or 6.3 LR LR 5 and LR CC are incompatible with El capitan. Nikon has recently updated libraries and those that are now used in the latest versions of LR.

• Windows 7 network drive displayed in the command window, but not in Explorer!

  Hi all

  I have several problems with mapping network drives between W7 x 64 business computers. All computers entirely patches, are part of the same network and home group (which is not part of a domain) and I'm looking in the file share on the shares created on the primary computer.

  Share 'Backup' (for example) on the primary computer has all necessary for the 'Me' user access rights, which exists on both computers and is active. When I try to map a drive to the action using the Explorer, I get the error "the folder you specified is currently mapped using a different user name and password... "even if nothing is currently connected to this computer and the command" net use * / d "returns no entries.

  Using an admin command window, I can not able to map any drive sharing using "net use x: \\mainPC\Backup/user: me mypassword" command. The disc is available in this order, but DO NOT SHOW IN EXPLORER window! (Sorry, I am really angry now). Dir command shows all the files, I can create folders and copy things under the command window, but the command 'Start x:' returns the error "x: refers to a location that is not available...". "(pull the hair!)

  Your help with this problem is greatly appreciated.

  Ray!

  What you observe is by design. Mapped network resources are visible only in the session that created them, but not in other sessions. What makes them universally visible would be a breach of security.

• My printer is printing but not print my laptop?

  1 HP Deskjet 3050 has J611

  2 Windows Vista 32-bit

  3. it says 'unable to communicate with the printer.

  4. it did not work I first put in place, but it will be eprint. It will also print from my laptop when I connect it with the usb cord, but not wireless.

  Molecular print HP utility:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-91788-1&cc=us&DLC=en&LC=en&OS=2093&product=5117616&sw_lang=

  HP Home Network Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-96434-1&cc=us&DLC=en&LC=en&OS=2093&product=5117616&sw_lang=

• My computer is stuck in a loop-it starts, the Welcome screen appears, I click on my name and made it appear my desktop background, but not icons. It then saves automatically power off. I started using the safe, but it's still just the power loop.

  Windows XP is my operating system.  My computer is a desktop Dell Dimension 457.  I think I must have got a virus/malware.  Please help me to access my computer!

  First of all, open and print this article from Microsoft - http://support.microsoft.com/kb/555648

  East of the fault of the only thing that I can see the information about adding the userinit.exe line - they forgot to include a comma at the end of the registry key.  So this print and add a comma with your pen to ink so that when you return as a result of this document you will not forget to register.

  Now, do a search to find and download BART PE to create a BART PE Boot disk (boot from the CD-Rom drive).

  Before you create the BART PE Boot disk, download and install Spybot Search and Destroy.  Then do a update to get all the updates to ensure that you have all the latest definitions for Spybot.  When you create the BART PE Boot disk - make sure you include the Spybot folder you have just downloaded and installed.

  I think that if you download and install LavaSoft Ad Aware Free will take place as well. Just download, install and do the updates it as well... Be sure to include this issue as well when you create BART PE Boot disk.

  Now, once you have created with these extra utilities startup disk, boot from the CD.

  Change the registry as a result of the above Microsoft article.  To enter the registry once BART PE CD is loaded, click on the GO button and click RUN and type REGEDIT and press ENTER.  When the registry opens, click the HKEY_USERS.  In the menu, and then click FILE.  Then click LOAD HIVE.  Then navigate to C:\WINDOWS\SYSTEM32\CONFIG\Software - note: the software is the name of the hive file registry you want to open.  When it is open, be sure to give it a name that MyHive will work.

  Follow the rest of the Microsoft Article in the link above to change the registry values.

  Once you have finished editing the registry, go back and click on the name of MyHive, then click file and unload the hive before leaving.

  Once this is done, then go to the command prompt, navigate to the executables to run Spybot, let it find and delete everything it can.  Then, if it will run - run the executable file for AD - AWARE Free Edition.  Let find and delete what it can.  I don't remember whether or not AD-AWARE will run on boot CD.  I know that Spybot is going.

  I suggest you to start in safe mode with support for network at this point.  I had good luck with my problems in this way.
  I hope that it will arrive where you can connect at LEAST.  Once in safe mode with network support I would then suggest to go to www.microsoft.com/protect and going to the PC or the PC security, regardless of the title/link is.  Then perform a free scan with Microsoft One Care Live.

  ON CHANGE:

  Oh... also, in the Microsoft article, there may be the drive letter as the X: drive... won't talk down and belittle everyone and their intelligence... I know that some people can be so literal and making a mistake in following the instructions is not an indicator of intelligence... but the X: should be C: or what is the letter of your boot drive... I know that for most, if not all here is a given but would not be a mistake bonehead by someone...

  Thank you... and it will be useful...

• Heading1 background image displayed in the topic pane, but not in the preview or output of WebHelp

  I configured my H1 style so that it has a gray background color and a background image that I've specified to display to the left and down with no recurrence. I also added a quantity of filling down so that my background image is forced to land. The effect I created looks like this:

  

  As you can see it looks good in the topic pane, but when I saw the topic or compile the project and view the output looks like this:

  

  Can anyone help?

  Thank you

  Jonathan

  Hello

  Background-attachment is the culprit, you also had two background images specified, so I deleted the redundant style:

  H1 {}

  do-family: Arial, without serif.

  font size: large;

  margin-bottom:-9pt;

  top of the margin: 6 pt.

  padding-top: 5px;

  padding-left: 5px;

  padding-right: 5px;

  padding-bottom: 16px;

  Color: #000000;

  make-weight: normal;

  make-style: normal;

  background: url (arrow.gif) non-repetition low left.

  background-color: buttonface;

  x-next-type: P;

  }

  Just replace the H1 with the code above, and you should be all ready to go.

  Take a bow

  Willam

  This email is personal. In our view, full disclaimer, please visit www.centric.eu/disclaimer.

• Trial version "touch friendly" Firefox - is flash supported? See the Flash in desktop mode, but not in underground mode.

  Metro mode it asks to install Flash player.

  Hello daniellung, no. firefox for windows touch version does not support content that uses plugins to display currently. See bug 738600 for reference.

• bad sound quality in the desktop version but not in the modern windows application

  I have a brand new Microsft Surface Pro 3 with all the updates that are installed and the latest version of Skype.

  When I use the modern windows application, the sound quality is very good.

  When I use the desktop app, it looks like wind. The poor sound is experienced by myself and the recipient and also when I echo test call.

  I uninstalled the windows application modern to have installed both causes a conflict.

  I tried to uninstall and reinstall the app without result.

  It is not the mouse or the speaker settings on my surface, because it works perfectly well when you use the modern windows application.

  any suggestions?

  I have now solved the problem by removing the MCO.

  For all those affected by the poor audio quality in Skype desktop client, please go to:

  Tools > Options > Audio Settings, then uncheck "Automatically adjust microphone settings" and "automatically adjusts the speaker settings.

  Credit for this fix is due to Tim Rolston of lovemysurface.net and I recommend his site to any other users of microsoft surface.

• Removing an unwanted program that displays on the C drive but NOT appear on the uninstall feature programs

  I need to remove gamevance from my computer and it shows on the C drive, but does not appear on the functionality of uninstalling the programs so I can't uninstall it. McAfee can not uninstall and says I need to manually add or remove programs. But since it does not appear there I can't uninstall it. Any ideas on how to uninstall it because it shows on the C drive, but does not appear on uninstall/remove programs functionality?

  Yes did not work because it would not actually be disappeared from my computer but by messing around after that you suggested, I found another person here who was sort of a similar problem and microsoft team recommends that they download a revouninstaller. If after that it still didn t in the revouninstaller but it allowed me to do a right click on the files and uninstalling this way.

  Thank you for your help and give me some ideas!

• Developer module shows that the blue square with a white cross, the images are displayed in the library ok but not im Module Developer

  Ive just updated to LR LR 5 6.

  The app seemed to run ok but as I was looking around any of my pics opens in the developer module, they have just a blue box with white cross?

  I have already mentioned this problem to the Lightroom engineers, and they are studying. In the meantime, the best thing to do is to ensure that your graphics card drivers are up to date, which can solve the problem.

• Followed the instructions, Creative Cloud Desktop installed, but not DW6

  I'm trying to reinstall DW6.  Jammed when CC would not install.  Installed, but always impossible to reinstall DW6.

  There was nothing, no message, no nothing.  Finally, I spent an hour with technical support and it solved the problem.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!