my firewall has been shut down for a few seconds for weeks - is this a virus?
I am running windows XP with SP3, and for weeks, I get a message that my firewall is disabled, but a few seconds later, it is again. Is this some malware problem that cannot detect the MSE?
Hello
1 did you changes to the computer before the show?
2. you receive an error message?
3. do you have another firewall installed (non-Microsoft) program?
4. which antivirus program is installed on your computer?
This problem may occur if the Windows Firewall service is stopped or if all the non-Microsoft Firewall program is installed.
I suggest you perform the steps in the following procedure.
Security Warning: the Windows Firewall is disabled
http://support.Microsoft.com/kb/2288085
Tags: Windows
Similar Questions
-
c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down
Pls teach the procedure for resolution of the problems of this error message.
Hi mac62sg,
Remember to make changes to the computer before this problem?
You can follow the steps mentioned in the article below
How to solve an error "STOP 0xC000021A.
http://support.Microsoft.com/kb/156669
Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Satellite L40 - 14N: problem has been detected and windows has been shut down
Help.
My laptop worked perfectly well until my son used last night and went on various games.
Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.He said that he has downloaded something or added a new hardware or software.
So, off it and tried.
Have tried everything to make it work. tried to get into F8 and F12.Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
Not knowing what else to do. I haves he Knackared now?
As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
Is this right?Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.
I would contact a technician for laptop and organize an audit of the material.
-
My husband must have some kind of bug in his computer as Kaspersky Internet Security, when he went on the internet, gave him a choice to block something that was causing a problem. When he clicked "Block" - he got the BLUE SCREEN! Is anyway for him to cancel it and save all her pictures on his computer?
It has a Dell Dimension 8400 computer about six years.
----
Sorry to bother you, but this time we did shut down his computer and restarted everything was fine. Apparently he had clicked on something like 'do not allow' or however its formulation that I do not see. So now we have to probably save photos and things out of his computer and take out the drive to reinstall Windows XP because there still be some sort of bug in there because we are getting popups saying some program are eager to enter the passwords section. I don't know much about it but try to fix it!I looked into Kaspersky and ran a browser Configuration and analysis of the vulnerability in his computer and found that there was a kind of 'control popup' in Internet Explorer that had been added in the settings of the pop-up window. -I deleted who.
I saw a setting in Kaspersky has been changed by default (they say "changed by the user, but did not change). -I have put all Kaspersky setting at default.
So now, we hope the computer that my husband will work very well in the future because it's good now, even after rebooting.
Now, we will have VERY serious about all of his photos on his backup external hard drive!
If we have more problems with that, I'll be back but for now, everything is GOOD!
-
This error is repairable? When I turn on my computer market, I always blue screen and error message. I do not see that my mouse shows thanks
Mary
Most of the errors are correctable. It's just that the BSOD errors are usually harder to fix than many others. Two reasons for this. One is that the system is usually more difficult with the result that the investigative process is hindered access. The other is that the initial error report indicates only the general nature of the problem and not the specific cause. If the system has been activated to provide a more detailed memory dump reports they can be analyzed. The problem for most users is that they do not have the computer skills to take on the task.
Move to the specific problem you have. The document in the link below gives tips on the clues or pointers for the bug check code: 0xc000021a
http://msdn.Microsoft.com/en-us/library/ff560177 (v = VS. 85) .aspx
Please answer a few questions.
1 how long have you had the problem?
2 do you have added or removed any hardware or software during the period, shortly before the problem occurred. If Yes please provide details.
3. are you able to access the computer in safe mode without the error occurring? My second link provides details on how to access safe mode if you have not done this before.
4. your computer is a desktop or a laptop?
5. What is your computer brand and model?
6. what you precisely through a Windows XP CD? Not all computer manufacturers provide a CD. Your answer to question 5 could lead me to discover an alternative so you worry if you do not have a CD.
The link following gives information on the Menu Options, Advanced Windows, you can try the last known good Configuration suggested in the first link I have provided.
http://support.Microsoft.com/kb/315222
Hope this helps, Gerry Cornell
-
I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.
I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.What about OttoWindows vista Home basicHello
Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.
Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/=========
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problemRun the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">-->
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Blue error screen that says windows has been shut down to avoid damage.
Help, please. We have an office that works under windows xp and we receive a blue screen error message. I need help running system restore because it does not run windows if it keep windows shut down and leaving me with a blue screen error message.
We need to know what the Blue error screen and if it referred to specific files and/or numbers. Also, please include a description of your computer and its recent history.
http://www.Aumha.org/win5/kbestop.htm - Stop errors
MS - MVP - Elephant Boy computers - don't panic!
-
BlackBerry Smartphones has been sent down for a while on 30-03-09?
Hello
I had many problems to receive email on my BB 8330 since I bought it. Sometimes it works, sometimes it doesn't. Ive had books sent me several times, deleted on the BB (for Verizon), from battery. I think I did all that.
Now he sent me a 'refurbished' phone to see if this corrects the it.
My phone is brand new!, now I have to get a used just to see if the problem resolves.
I wake up this morning and now Im getting emails again. The server had problems yesterday by chance?
ID hate to give up a new phone for a used... little matter how much test it goes through before they send them.
My new phone has probably went through the same ordeal too.
Any suggestions? The phone will be here today
Problem solved!
It was at the end of Verizon. They suggested having problems with a tower in my area.
Thanks for all the answers.
-
I followed the directions when invited to press F8 but nothing not done, I find myself just to return to the 'blue '.
I don't have add new hardware before that happened.
You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.
When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.
If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.
If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.
-
After a Windows XP update, I now get a blue screen saying windows has been shut down
He advocates disablinng options memory BIOS (which I don't know how to do), and I can't go in safe mode to learn how. The technical information States:
STOP: 0X0000007E (0X805C49B8, 0XF7A202B4, 0 X 80000003, 0XF7A1FFB0)
The computer is a Dell Inspiron E1705 with Intel. How can I access things again and not lose all the files?
I just did the following (from this link http://www.stateofthetech.com/?p=117) and it worked!1 boot from your Windows XP or DVD CD and start the recovery console (see this Microsoft Help article at this stage)
2. type this command: CHDIR $NtUninstallKB971486$ \spuninst
3. type this command: BATCH spuninst.txt
4. type this command: exit
-
My network firewall has been disabled for some reason.
Original title: NetworkFireWall
My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.
My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.
(1) you have a third-party security software installed?
This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall(2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...
If you have an antivirus up to date solution its definitions and do a full scan of the system...
If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)
http://www.Microsoft.com/security/scanner/en-us/default.aspx
And/or
http://www.Malwarebytes.org/products/malwarebytes_pro/
And/or
http://www.simplysup.com/tremover/download.html (shareware)
And/or
http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
And/or
http://www.Kaspersky.com/free-virus-removal-toolIf this also isn't that the problem may be that your firewall service is damaged...
(3) open a command prompt run as administrator and type sfc/scannow(4) try to fix the firewall service
Run the tool repair services by ESET
http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
And/or
Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
(If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)And/or
Open a command prompt using run as administrator
and copy - paste these
Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
and press enter(4)(run as administrator) command prompt, type netsh advfirewall reset , and press "enter."
-
Cannot send email: message that the system has been temporarily disabled for security reasons
original title: cannot send e-mail
I can't use the system of electronic mail by default on my computer to send e-mail. I get the message that the system has been temporarily disabled for security reasons. I am told that when I close the screen, a series of numbers will appear and typing reactivate the system. However, no figure never appears. What can I do to get this thing working. I really need.
Hi marniez,
Please see the thread similar to the following for a solution:
-
Printer Hp 6520 automatically shuts down after a few hours
Original title - printer hp 6520 problem
My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does. It is connected through the usb port on my Pavilion. I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well. Any ideas on how to solve this problem would be greatly appreciated. Thanks in advance.
I could join HP support on this issue this morning. There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector. Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent. So, if that helps anyone, good! And thanks also for your help. :^) gene
-
I can't apply a snippet of ActionScript to a button once a motion tween has been applied to the button. How can I do this?
I use Adobe Flash Professional 15.0.1.179.
My operating system is Mac OS x 10.11I am able to apply a snippet of code ActionScript for the button before you apply a Tween movement on the button; However, when I try to apply the snippet for the button after the motion tween has been applied, I am unable to do so. The action panel reads "Select a single image to apply or view script."
Hi Robert,.
That seems fine. You should be able to add code snippets at this stage.
Try following the steps below:
1. Select None (click somewhere on the empty area on the stage)
2. click on frame 1 of your third layer. (be sure that a picture is selected)
3 open the Code Snippets Panel, choose the desired code snippet and apply it. (the code must obtain added layer Actions.)
If you write code manually, select frame 1 on the Layer 1 (shares) and add the code here.
I hope this helps!
Mabrouk
-
My administrator account has been accidentally deleted from my computer. How to restore this account and all its attributes?
try to run a system restore point before the incident.
the system restore function can restore the user accounts and some system folders.
Maybe you are looking for
-
where is the lock in the right corner
I use to get a padlock in the lower right of the screen to let me know that I was at a secure site. I haven't it.
-
Hi, I'm just getting started in LABView and I am a very slow learner. I have build a counter to count my gamepad operations as it is cycling on a tester of life. I put him in place to count the individual directional activations, but I join to have i
-
How to restore after re activation? Hello! I got a fatal error that I turned on my pc and when I clicked to repair the problem asked re activate my internet connection and my widows vista business. However when I did it seems to have removed all my p
-
Can not register parental (VB and VBUSC.exe) in Windows 7
Hello world I installed my old Visual Basic programs in Windows 7 and I have two problems. 1 - VB himself who apparently is not compatible. 2 - I used some controls that are no longer supported, but I used vbusc.exe for Windows XP and it worked. For
-
don't not running disc can hear the rotating disc but nothing on the screen
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: we're not serious what the dvd is for place in the taskbar and you can hear fine but nothing shows up on the screen tried to use good med