My Flash continues to operate

I have to non-looping, but my Flash banner across the top of a Web site, that he continues to spin over and over again. I want him to stop at the end! Help, please!

the last frame put a keyframe.
Use the actionscript code:

Stop();

everything that fact

Tags: Adobe Animate

Similar Questions

  • My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

    My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

    The next time you see the flashing light amber...

    Open Finder > Applications > utilities > AirPort Utility

    Click on the image of the AirPort Express

    If you see a button update, click on update the firmware on the airport

    Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

  • The indictaor of activity continues to operate

    The activity indicator, (this little ring that runs when there is a search), continues to operate when I open certain websites. But it doesn't happen every time. It happens most of the time, however, (about 80%) and only on some websites.

    I am a new user of Firefox, (switched from IE9), and it is a symptom similar to something that also happens on my AOL browser.

    I don't know if that's an indication that something did not open on this web page or what.

    I can stop it by clicking the "Reload" button, then clicking on the 'Stop' button afterwards. Any ideas?
    Thank you
    BTW I did ensure that the site has been "authorized" through the security option. ALSO: This would happen from the beginning until I transferred any other information from the website or addons.

    Some sites have JavaScript which is poorly coded and caused be the indicator of activity to continue.

    You can check that by temporarily disabling JavaScript or use an extension like NoScript to block JavaScript to see if that helps.

  • Suddenly icloud calendar does not load on my Lenovo PC.  Has worked for months;  iCloud contacts and photos both continue to operate.  Any suggestions?

    Suddenly icloud calendar does not load on my Lenovo PC.  Has worked for months;  iCloud contacts and photos both continue to operate.  Any suggestions?

    Hi scschwind,

    I understand that you are having problems with your iCloud calendar on your Windows computer. Here is an article for you that will help you solve this problem:

    Microsoft Windows (Microsoft Outlook)

    After each step, check to see if the problem persists.

    Check the system requirements

    Make sure that your PC meets the system iCloud.

    Check your Internet connection

    1. Try to go to www.apple.com. If you are unable to connect to the Internet, your iCloud calendars and events does not update in Outlook. Get help with your Internet connection.
    2. Try to open a secure Web site to your PC to see if you can access the ports 80 and 443. If the site does not open, you do not have access. Contact your ISP for help. Safari requires access to port 443 to push updates between iCloud and your devices.

    Check your settings

    ICloud opened for Windows and make sure that you are connected to the same iCloud account that you use on your other supported devices.

    Update Outlook

    If you have recently made changes in Outlook that are not updated on your other devices (or vice versa), click the Refresh button on Outlook.

    Turn off iCloud calendar and turn it back on

    1. Close Outlook.
    2. ICloud opened for Windows.
    3. Uncheck the Mail, Contacts, calendars, & tasks and click on apply.
    4. Wait a few seconds. Select Mail, Contacts, calendars, & tasks and click on apply.
    5. Open Outlook.

    Make sure that the Outlook Add-in iCloud is enabled in Outlook

    In Outlook 2010 and later:

    1. Click on the file menu.
    2. Click Options in the left panel.
    3. Click on add-ins in the left panel of the window Options in Outlook.
    4. Look at the list of add-ins in the section Active Application Add-Ins.
    5. Select the Outlook Add-in iCloud.

    In Outlook 2007:

    1. On the Tools menu, select Management Center.
    2. Select Add-ins in the left column.
    3. Look at the list of add-ins in the section Active Application Add-Ins.
    4. Select the Outlook Add-in iCloud.

    Make sure that iCloud is not your default account in Outlook

    • In Outlook 2010 and later, select file > Info > Account Settings > data files. If iCloud is listed as default account in the comments column, select another account and click on set as default.
    • In Outlook 2007, select file > data file management > data files. If iCloud is listed as default account in the comments column, select another account and click on set as default.

    Restart your computer

    After you restart your computer, see if you solved the problem.

    Find your calendar in Microsoft Outlook

    Learn how to manage Add-ins with Microsoft Outlook.

    1. Make sure that the calendar is enabled in iCloud for Windows.
    2. Locate your data in the iCloud folder in Outlook. You can also view your data in deleted items in your Outlook folder list.

    If you find your calendar data in the deleted items folder, it is not because iCloud deleted your data. When you turn on Mail, Contacts, calendars, & tasks in iCloud for Windows, iCloud copy your calendar for the default Outlook .pst file data in iCloud. Then iCloud removes the calendar of the .pst file data by placing it in the folder deleted in Outlook items. Calendar data then moves to the iCloud data set in Outlook so that iCloud can push data to and from Outlook.

    Get help using iCloud calendar - Apple Support

    https://support.Apple.com/en-us/HT203521

    Thank you for using communities Support from Apple!

  • Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

    We have recently installed McAfee Anti-virus on our computer.  Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

    How can I make the default antivirus McAfee for computer and remove Vista Anti-Spyware?  It is not in my software to uninstall.

    Thank you

    Sarah

    Sarah;

    Your system is infected with a rogue security application.  Use these instructions to remove it:

    http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

    If you had a legitimate anti-virus installed before McAfee, did you remove it with a removal tool specialized Publisher of this previous anti-virus before installing McAfee?  Inability to completely remove previously installed security real-time applications can cause performance problems, system instability and even reduced the new facilities of security features.

  • I installed Adobe Cloud and when I open it, a dotted circle continues to operate and I don't see how to install applications. I reinstalled Adobe Cloud twice and it happens again.

    I installed Adobe Cloud and when I open it, a dotted circle continues to operate and I don't see how to install applications. I reinstalled Adobe Cloud twice and it happens again.

    Can you help me?

    Try once steps below:

    Uninstall Adobe Creative Cloud.

    Using creative cloud | Uninstall the creative cloud desktop application

    Step 1:

    Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

    Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

    Step 2:

    Navigate to C:\Program Files (x 86) \Adobe.

    Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

    Impossible to remove? Rename it to Adobe Creative Cloud centenarians.

    Step 3:

    Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

    Type below command and press the enter"" key.

    AppData

    Then go to the Local > Adobe.

    Open the Adobe folder and delete folders named AAMUpdater and OOBE.

    Disable the firewall temporarily.  [Optional]

    Step 4:

    Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

    Then, download and install the Adobe Creative Cloud app and check.

    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

    Note:

    For personal Internet connection only, make sure you detect Automatic Proxy settings is enabled.

  • Audio in Flash CS4 continues to operate.

    Hi, I did a video flash for my science project today, I added music to it also. but the music continues on runnning even when the presentation is completed. and when I stop it and play again, the audio runs in the background of the last time I played and another stream of this audio starts from the beginning. as if I play the song onec early and once from somewhere in the middle and both at the same time.

    Sorry if this sounds confusing lol.

    can someone help me?

    I'm really new to Flash.

    http://help.Adobe.com/en_US/Flash/10.0_UsingFlash/WSd60f23110762d6b883b18f10cb1fe1af6-7ce8 a.html

  • I had Adobe Flash continuous accidents since the last update.

    I had continuous accidents of Adobe Flash for Firefox updated 3 or 4 days ago. I uninstalled Flash through the Add/Remove in the control panel and reinstalled Adobe Flash. Update ran and all plugins etc are uptodate. What to do now to solve the problem of Crash in Farmville, the Zoo and the island treasure

    This has happened

    Each time Firefox opened

    is there an update a few days ago

    I've tried a few things but it still does not work...

  • G6 caps lock flashes continuously, nothing on the screen

    Hi, I have a HP g6-1325sa had a problem which had to replace the fan.

    However since then nothing appears on the screen F12 has an orange light and the caps lock continuously flashes every 2-3 seconds. This isn't a blinking code it does this constantly.
    So far, I have tried blocking the vents and leaving the laptop that works for more than an hour, as I've heard can be caused by dry solder joints. I have also tried to replace the motherboard and twice managed to get a cursor blinking on the screen but niether of those moments a normal startup is possible that the HARD drive has been disconnected on both of these occasions, the first time that it happened, I had just disconnected power and battery and power and hold for 30 seconds I'm guessing it's a cmos reset.

    the only cause I can think is that the processor is cooked when the fan has been replaced, but who had already paid for another motherboard I would like someone to confirm what it means when the caps lock flashes constantly and if there is another way to fix it.

    Thank you very much in advance for any help

    Solved this problem where everyone sees the same behavior.

    CPU replaced and he started to ask right now, it seems that my predecessor Cook the processor when they changed it is fan.

  • Having MovieSymbol to continue to operate even after mouse at the ends

    So I have a button that when I mouse over animation begins... Unfortunely when I move the mouse when the button is the animation abruptly ends...

    I would like to allow him to play the entire animation... no matter where currently the mouse...

    Also what I could possibly need is for her permanent loop the animation once the button has been said on:

    WHY: I'm making it so when you hover over the button the button "work away from you" making it almost impossible to click on

    Thank you very much

    Stephen

    If you place objects inside the 4 frames of a button, which is an instance of the class SimpleButton.  Let's call it a button for easier Talkin '.  Button symbols have features of builtin providing for automatic rollover and rollout behaviors without code. Probably, you do not want to use a button symbol and can just go out with the help of a button as a movieclip symbol image.

    If the main purpose of the animation must evade the user, then an approach strictly actionscript might work better.  This one was a bit fun to continue just for ha ha's, so I fiddled with a sample file you can watch / study.  I don't expect that you'll understand, at least not at the first glance, but it shows a (probably crude) way to make a button that allows to avoid the mouse cursor.  Some of the other people who help here regularly will probably have more than sophisticated solutions.

    In this version... There is an invisible (alpha = 0) area surrounding the image that adds in bulk to the movieclip as getting close the image will generate the rollover event.  When this event occurs, two actionscript tweens are highlighted that the movieclip move to some new random x and y which are sufficiently far enough to avoid the postponement of the being held if all goes well (which would stop the movieclip under the cursor, if she did not move very far)

    Anyway, here is the link to the file...

    http://www.nedwebs.com/Flash/AS3_Avoid.fla

  • FF continues to operate on the bottom after visiting Google mail.

    Since the 25 FF and with installed gtalk, FF continues to work on background only after the visit of Gmail. Disabling the addon from Gtalk, the problem is the same. If visit gmail with HTML only (slow connection) then firefox successfully completes. All other sites (F 25, 26 and 27) works very well. It is clear to me, it's a problem of Gtalk.

    If uninstalling Gtalk then FF plugin (up to 25-27) ends the success.

    The same problem has been detected with the following recent Linux distribution: Ubuntu, Mandriva 2010.2, Mandriva 2011 and 2013 OpenMandriva, Susa, on different machines, but with a similar material.

    GTalk works (phone call, chat and video calls) so that it runs without a problem, but at the close of FF, he continues to work on the bottom and did not open another window, except with the - new-instance option.

    Hello Uli1958,

    Please contact the Mozilla Support. Looks like a bug has already been filed on this matter. You can follow the progress here:

    https://Bugzilla.Mozilla.org/show_bug.cgi?id=969565

    See you soon,.
    Patrick

  • Videos do not play or load flash continuously forever.

    I have seen so many questions about it on the internet ask in different ways and was offered many solutions I've tried, but can never seem to find a solution!

    The problem is with flash videos does not not in Firefox. The problem has been isolated to just FF, but has now become universal for my other browsers (Explorer and Chrome).

    I can see videos on YouTube and various other sites very well, however, other websites for school that force you to watch a video and answer the questions, simply load the video for always and play something that the video is fully charged or simply play the sound but they displayed a miniature frame 'frozen '.

    I did everything, ranging from the update of FF and Explorer, Adobe Flash (ActiveX and Plugin version), update Windows 7, "reset" FF, started FF in 'safe mode', uninstalled and reinstalled Adobe Flash Player and Shockwave, uninstalled and reinstalled FF, clean the cache and scanned the registry.

    There has been two cases where the video read, but that was short-lived. The situation quickly returned to the load forever or play a sound only with the image fixed.

    The problem happened since perhaps March 2013.

    Might help to know I am running Windows 7, 64-bit, and I am fully updated on all programs and plugins.

    Solved.

    Don't know what it was, but crossed the entire list in each tab in "msconfig" and disabled everything except firewall AVG, Adobe and everything associated with MS.

    Works fine now.

    Thank you!

  • Cooling fan continues to operate on the Z30B Satellite after installing Win 10

    The cooling fan is permanently after the upgrade to Windows 10.
    This is the case for the symmetric mode, but also in ECO mode (activated on the touchpad).

    The two modes are defined in passive when running on battery cooling...

    I tried to activate/disable relevant power settings in Win 10 and the ECO utility, but the fan continues to run: it seems that if Win10 is reversing the Toshiba ECO utility.

    Everything worked perfectly before the upgrade.

    This problem can be resolved, or do I have to wait for an update of the Toshiba utility?

    / Breinholm

    I don't know if it will help, but try to reinstall the ECO utility.

    Visit pleasehttp://win10upgrade.toshiba.com to choose your country and you should be able to find the link for downloading drivers, tools and utilities

  • Suddenly the ipad is not find wifi server. WiFi shows on the ipad and the circle continues to operate.  Parameters is frozen. I turned it off but the Apple logo does not appear.

    All of a sudden my iPad 3rd generation (3 years) can not find the server.  'Settings' are frozen and I can not change anything here.  The wifi icon is present.  The loading circle is running continuously. I pressed the on/standby button and the message "slide to turn off" never came.  When I released the button, off ipad and when you press on again the opening screen came. I can't reset the ipad.  What should I do now?  Help, please.  Carol

    Take a look at this Apple Support article:

    https://support.Apple.com/en-us/HT204051

    Reset your network settings.

    Settings - general - reset - reset the network settings

    Reset your device. This will not erase your data stored on the phone.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPad/contact/

  • Satellite Pro A200 (PSAE4): DVD player flashes continuously

    Hello
    I have been using a Satellite Pro A200 (PSAE4) computer laptop for a while now without any major problems.

    My dvd drive (tsst TS-L632H harvest) no longer works since a few days now... Specifically, its LED is permanently orange flashing. The drivers are up to date. The eject button does not work either. No disc is inserted. The car seems fine in Windows Device Manager...

    If opened manually and if the disc is in the drive, I can't see all the data. Cannot start the disk either.

    I'm running Vista 32 bit SP1 with the latest bios available on the toshiba site (2.40).
    Since then, I need to fix the 'black screen' often reported problem before the login prompt, by using the windows installation disc

    Any help would be really appreciated.

    Thank you!

    Hello

    According to your page, you are not able to boot from any CD or DVD, not even the Toshiba Recovery CD.
    Am I wrong?

    To be honest, I've no idea why such question which went past but I think it s related to the hardware failure and that the replacement could help
    I put t know how old laptop is but perhaps the warranty is valid and it could be replaced for free

    What do you think?

Maybe you are looking for