The indictaor of activity continues to operate

Similar Questions

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Suddenly icloud calendar does not load on my Lenovo PC.  Has worked for months;  iCloud contacts and photos both continue to operate.  Any suggestions?

  Suddenly icloud calendar does not load on my Lenovo PC.  Has worked for months;  iCloud contacts and photos both continue to operate.  Any suggestions?

  Hi scschwind,

  I understand that you are having problems with your iCloud calendar on your Windows computer. Here is an article for you that will help you solve this problem:

  Microsoft Windows (Microsoft Outlook)

  After each step, check to see if the problem persists.

  Check the system requirements

  Make sure that your PC meets the system iCloud.

  Check your Internet connection

  1. Try to go to www.apple.com. If you are unable to connect to the Internet, your iCloud calendars and events does not update in Outlook. Get help with your Internet connection.
  2. Try to open a secure Web site to your PC to see if you can access the ports 80 and 443. If the site does not open, you do not have access. Contact your ISP for help. Safari requires access to port 443 to push updates between iCloud and your devices.

  Check your settings

  ICloud opened for Windows and make sure that you are connected to the same iCloud account that you use on your other supported devices.

  Update Outlook

  If you have recently made changes in Outlook that are not updated on your other devices (or vice versa), click the Refresh button on Outlook.

  Turn off iCloud calendar and turn it back on

  1. Close Outlook.
  2. ICloud opened for Windows.
  3. Uncheck the Mail, Contacts, calendars, & tasks and click on apply.
  4. Wait a few seconds. Select Mail, Contacts, calendars, & tasks and click on apply.
  5. Open Outlook.

  Make sure that the Outlook Add-in iCloud is enabled in Outlook

  In Outlook 2010 and later:

  1. Click on the file menu.
  2. Click Options in the left panel.
  3. Click on add-ins in the left panel of the window Options in Outlook.
  4. Look at the list of add-ins in the section Active Application Add-Ins.
  5. Select the Outlook Add-in iCloud.

  In Outlook 2007:

  1. On the Tools menu, select Management Center.
  2. Select Add-ins in the left column.
  3. Look at the list of add-ins in the section Active Application Add-Ins.
  4. Select the Outlook Add-in iCloud.

  Make sure that iCloud is not your default account in Outlook

  • In Outlook 2010 and later, select file > Info > Account Settings > data files. If iCloud is listed as default account in the comments column, select another account and click on set as default.
  • In Outlook 2007, select file > data file management > data files. If iCloud is listed as default account in the comments column, select another account and click on set as default.

  Restart your computer

  After you restart your computer, see if you solved the problem.

  Find your calendar in Microsoft Outlook

  Learn how to manage Add-ins with Microsoft Outlook.

  1. Make sure that the calendar is enabled in iCloud for Windows.
  2. Locate your data in the iCloud folder in Outlook. You can also view your data in deleted items in your Outlook folder list.

  If you find your calendar data in the deleted items folder, it is not because iCloud deleted your data. When you turn on Mail, Contacts, calendars, & tasks in iCloud for Windows, iCloud copy your calendar for the default Outlook .pst file data in iCloud. Then iCloud removes the calendar of the .pst file data by placing it in the folder deleted in Outlook items. Calendar data then moves to the iCloud data set in Outlook so that iCloud can push data to and from Outlook.

  Get help using iCloud calendar - Apple Support

  https://support.Apple.com/en-us/HT203521

  Thank you for using communities Support from Apple!

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

  We have recently installed McAfee Anti-virus on our computer.  Vista Anti-Spyware continues to operate and has only browse to an Internet Explorer upgrade.

  How can I make the default antivirus McAfee for computer and remove Vista Anti-Spyware?  It is not in my software to uninstall.

  Thank you

  Sarah

  Sarah;

  Your system is infected with a rogue security application.  Use these instructions to remove it:

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  If you had a legitimate anti-virus installed before McAfee, did you remove it with a removal tool specialized Publisher of this previous anti-virus before installing McAfee?  Inability to completely remove previously installed security real-time applications can cause performance problems, system instability and even reduced the new facilities of security features.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Work on the key no activation

  Received PAK for upgrade lic lic 10 to 50. Received the new activation key.

  Having the IOS PIX 501 ver 6.3

  Continue to be "type help or? for a list of the commands ' whenever I try to enter the new activation key.

  There is no syntax in the help manuals - just show activation key and key activation.

  what I am doing wrong? I'm in command mode, I type in the key of activation-00000000 00000000 00000000 00000000 (hex key, they gave me in issuing the permit) when I hit enter - I get "type help or? for a list of commands.

  It can't be so difficult - mahalo (thank you)

  Go into configuration mode and use this syntax:

  PIX # conf t

  PIX (config) #-00000000 00000000 00000000 00000000 activation key

  See the activation key

  After that, you have to restart to activate it.

  Make a version of the show to see if it has changed the license.

  sincerely

  Patrick

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• I installed Adobe Cloud and when I open it, a dotted circle continues to operate and I don't see how to install applications. I reinstalled Adobe Cloud twice and it happens again.

  I installed Adobe Cloud and when I open it, a dotted circle continues to operate and I don't see how to install applications. I reinstalled Adobe Cloud twice and it happens again.

  Can you help me?

  Try once steps below:

  Uninstall Adobe Creative Cloud.

  Using creative cloud | Uninstall the creative cloud desktop application

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove? Rename it to Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Disable the firewall temporarily.  [Optional]

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Note:

  For personal Internet connection only, make sure you detect Automatic Proxy settings is enabled.

  

• Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, he

  Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy ecc ecc. Tried all that but I'm stuck. any help, please? Thank you.

  Hello

  Please try following steps depending on your operating system

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• Question about the duplicate database active on 11 GR 1 matter?

  Hello
  
  I'm getting following error active creating duplicate data.
  
  
  From backup 17 April 11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 129 type device = DISK
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = 00001 name=+DATA/testdb/system.dbf
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:55:09
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/sysaux01.dbf 00003
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:57:22
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/undodbs1.dbf 00002
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:59:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/rman01.dbf 00004
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 17/04/2011 18:01:30
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 to 17/04/2011 18:01:30
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  
  Thank you

  Check on MOS:

  Duplicate of Active database error: Ora-17627: Ora-12154: Tns: could not resolve the C [1144273.1 ID]

• Seller has not reset completely, now I'm stuck on the lock of activation?

  How to bypass activation lock?

  Hello

  Activation lock prevents unauthorized use of Apple Watch if it is lost or stolen.

  In order to pair the watch to your iPhone, you should be the previous owner to enter the Apple ID and password on your device or to disable the feature via https://www.icloud.com/ by signing with their Apple ID > settings > my devices > Apple Watch-click > click the 'X' > click on delete.

  If you cannot arrange for the former owner to do this, you must return the watch to get a refund.

  You will not otherwise be able to use the watch. There is no way around this security feature.

  More information:

  On the lock of Activation on your Apple Watch - Apple Support