My gadgets stop working and the work of whont

Similar Questions

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

  I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

  Manually delete the cache of the preview of your user folder.

  Mylenium

• Driver IGFX stopped responding and the screen is now healed

  Hello!

  I have a problem with games on my Inspiron 1525. I found subjects with this problem but can't find any idea how to solve this problem.

  "Driver Igfx stopped responding and the screen has now recovered" - this error pops up when I play 3D games.

  Video: Mobile Intel® 965 Express Chipset Family.

  Latest drivers from dell.com are installed: 7.14.10.1409.

  Of the intel.com, I downloaded driver v7.14.10.1472 but cannot install it.

  How can I solve this problem?

  p.s. DirectX 10 installed.

  
  

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• Satellite A205-S5864 - stop itself and the slow performance

  I'm new to this forum, so help me out anyway you can.

  I noticed that my Toshiba laptop showing odd behavior lately. She recently began to stop himself suddenly without warning. We arrived at the point where it is a regular occurrence. I don't know what it is, if the computer is starting to show it's age, or a hardware problem, etc.. I hope that's not die because this computer begins to happen over two years. The computer knows that he was arrested not because I get the message that this was not decommissioned and how I want to start in.
  I also noticed that, even though I have a core 2 processor, the computer takes awhile to start. I don't know how to improve the performance, because I regularly clean the registry and trash. I have norton 360 along with spyware blaster.

  any input would be appreciated. I will post more details that are necessary.

  Hello

  I m not A205 owner but on my computer Toshiba laptop, I got the same problem it stops and the reason was a higher internal CPU temperature. So I ve looked in the forum and founded an interesting article on the cleaning of a Toshiba laptop. That's why you need compressed air and you can clean without disassembly.
  Check this box!

  Your slow performance it of difficult to say something on this issue, but in most cases it s advisable to reinstall Windows.
  In my opinion the Norton antivirus slows performance a little so I m using the software tool free AntiVir.

  BTW, did you remove Toshiba TEMPRO?

• After no installation of firefox 4 no refresh or stop button and the "home" button on the side of har bar google search on the narrow page how do I put the back buttons they belongby the back button?

  I uninstalled and re installed and same even used a different installation file that it installed well on laptop had to go back to firefox 3. something until someone can tell me what is wrong

  A combined Stop/Reload/Go button that is placed at the right end of the address bar is used in Firefox 4.
  During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.
  If you type in the address bar this button would then become a button go.
  You can middle - click this button Reload to duplicate the current tab in a new tab.
  ---
  You can find the button at the right end of the Navigation bar.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  Drag the home button from its current position on the right to the previous position to the left of the address bar.

  • http://KB.mozillazine.org/Toolbar_customization
  • Drag the buttons Reload and stop at their previous position to the left of the address bar.
  • Set the "Reload - Stop" order for a combined "Stop/Reload" button.
  • Set the order of 'Stop - Reload' or separate them otherwise to get two separate buttons.

• BlackBerry smartphones stop name and the body of the message to be displayed when I receive a text message

  Hi, when I receive a text, email or call, the name of the sender and the beginningt of the text message appears in a black box on the screen and stays there for 20-30 seconds. Is there a way to cut this notification method and have just the new message counter and the blackberry icon methods for letting me know that there is a new message?

  Thank you, SMK

  I checked a few items on my list of app, and it seems that e-Mobile Preview is the culprit... Thank you for pointing me in the right direction. I delete the app or turn it off.

  Thanks again!

  Steve

• Norton made my Windows Sidebar gadgets stop working. How can I do without computer knowing talk? (enter the administration system, etc. is too scary for people like me, can I solve without an engineering degree)?

  Download Norton off my Windows Sidebar Gadgets

  Hello

  You may need to contact Norton Support to get the info on how to stop Norton to block your gadgets
  If this continues.

  Norton support
  http://www.Symantec.com/Norton/support/index.jsp

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------

  Then proceed as follows:

  Logon as Admin - Start - type in the area of research-> COMMAND - find top - RIGHT CLIC on it-
  RUN AS ADMIN

  Replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
    
  Press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  Then copy / paste each of them following their tour each come into

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work

  Type in the search-> Sidebar box - find top - make a RIGHT CLIC top - RUN AS ADMIN

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My weather Gadget says "unable to connect to the service. I use this gadget for years and it does not work.

  I use Windows 7 Enterprise and since the beginning of February this year (2015) my weather Gadgets stop working, they first show the forecast and now they are showing a message "unable to connect to the service. Is there a problem with the gadget?

  Everyone!

  I recommend this link with more instructions and information on how to solve this problem of wwcc1 and his post on 2015-Feb 5: here

• I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

  I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Gadgets Windows has Stopped Working - constant crash after downloading third-party gadget

  So, I just installed windows 7 and I advanced and installed a third party gadget (pandora).  When I went to connect to my pandora account, he does the rest of my fall of gadgets.  Now, any time I try to delete a gadget or load one of them, I get a message that appears stating that the Windows Gadgets stopped working.  I can't understand how to remove a gadget without loading each of them.

  Thank you very much for the suggestion that I had not thought of that.

  What I ended up doing was a system restore, which fixed the problem beautifully.  I hope this helps anyone else with this problem :).

• HDTV display has stopped working after the installation of El Capitan

  After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

  Hello Macthewife,

  Thank you for using communities of Apple Support.

  I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

  Use AirPlay to view a video of your Mac on a HDTV

  Best regards.

• New computer Windows 7 and the Wii

  Well, I really have no where else to turn, so I thought I might as well try these forums.

  Basically, my problem is that my new computer Windows 7 Home (I just bought 1 week ago), may not share the router with Wii my brother. This is the router card, as well as my problem:

  Linksys BEFSR41 V4, 4 port wired router-last update

  ISP is Comcast

  Configured for the port before the Wii, using the - Ports 1-65535, both TCP and UDP and assigned a static IP address 192.168.1.111 (which was at the recommendation of Nintendo on the phone)

  Wii has been assigned a static IP (as mentioned above) as it was my computer.

  Wii has the correct entries in the router DNS server

  Wii is configured to use the wired connection

  My computer is a Dell Studio XPS 8000

  Here's my IPconfig/all

  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Mokey>ipconfig/all

  Windows IP configuration

  Name of the host...: Mokey-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) gigabit Ethernet
  Physical address.... : 00-25-64-E8-CE-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::45d:fd19:80fe:3 b 74% 14 (Preferred)
  IPv4 address: 192.168.1.150 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCPv6 IOOKING...: 251667812
  DHCPv6 DUID customer...: 00-01-00-01-12-B1-5C-31-00-25-64-E8-CE-10

  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {677AB390-DC0F-4548-8F15-A546757783EC}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  My static IP PC specs:

  Internet Version 4 Protocol

  IP address: 192.168.1.150

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  Alternate DNS server: white

  We have 2 computers and a Wii connected to the router, everything has a static Ip address. If Wii Port Forwarding is disabled, both, we can go online, no problem what - if - ever, everything is wonderful and quick. If the Wii is enabled on the router, my brother PC and Wii can apply online, but my PC can't. It has never happened before with my old XP sp3 computer (HP Pavilion, record quite high for the time, 9 years old, worked as a beauty ), but for some reason my other cannot share the line with the Wii. Just mine, no less . I don't know what could be the cause of the problem. I did research all this information when we first have his Wii, so everything was peachy until this new computer.

  Please, any help is very appreciated, I traveled more than 4 hours time to mobile phone, only to get the evasive of Comcast and Dell.

  Your TM602G is a cable modem which should work fine when your BEFSR41 resetting to the factory default values.  Note that your modem has a battery in it.  The battery must be removed, for a minute, each time that install you the modem with a new router, or connect a computer directly to it.  I suspect that is the reason why you couldn't get an Internet connection with the last configuration that we tried.  Also, do not connect anything to the TM602G USB port.

  For the time being, until all computers are running, please unplug the Wii.

  For now, please set both your computers in order to "Obtain an IP address automatically" and "obtain a DNS server address automatically".  Restart the computer and make sure it is always set up this way.

  I think it will be better to start with a "clean slate" to set up your network, the next step will be to reset your factory default BEFSR41.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) to connect to a computer (if possible, use a computer Win XP or Vista) cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Let the empty user name (Note: some Linksys routers have a username "admin") and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this far without problems, put your entire network.  Then, using an ethernet cable, connect the ethernet on the TM602G port to port Internet (WAN) of the BEFSR41.  Leave your computer connected to the LAN of the BEFSR41 port.   Remove the battery from your TM602G and wait a minute.  Replace the battery in the TM602G.  Turn on your TM602G and let it start up completely (1-3 minutes).  Turn on your BEFSR41 and let it start up completely (1-2 minutes).  Turn on your computer.  Now, try to connect to the Internet.  If you have trouble, temporarily disable your firewall software computer and try again.  If you get a computer to get an Internet connection is working properly, then (using an ethernet cable) connect your second computer to the BEFSR41 and try to get an Internet connection active.    STOP HERE and the report with your results, including the results of step 9 and 10, and whether or not, both of your computers working Internet connections become.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

• the gadgets function has stopped working properly...

  the gadgets function has stopped working properly... those I had put a few weeks ago are still on the desktop... but it won't let me add, remove or access the Panel command or right-click gadgets... when I right click on the desktop and click gadgets, nothing happens... when I go into Control Panel and click on gadgets nothing happens... the addition of gadgets, uninstall gadgets and restore the gadgets links in the Control Panel does not work... nothing happens when I click on them... the only link that works is the "get more gadgets online"... and I re-download and reinstall a gadget to access the menu gadget... another while TI leaves me not go... What is happening I'm frustrated

  Scanner of CFS on the computer:
  http://support.Microsoft.com/kb/936212

  All the best!