My habit of Epson print it says the printer is ready, but the document is just to feel that
My printer does not print. I hit print and it enters Quebec and sits there. I had to remove all those who are in Quebec and try to make a new document and nothing happens. I turned off the printer and turned back and nothing
Hello
What is the printer model #?
What version of Windows are you using?
The printer works fine so far?
It would be best if you contact us Epson support on the issue.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp
Follow these steps, and then try printing again.
Press enter
Scroll down to print spooler
Right-click on the spooler > select Properties
Make sure that the Startup Type is set to automatic
Under the service stop status
Wait for Windows to stop the printer
Control Panel > open the printer folder
Right click on the printer icon > select Open
Do you see the documents listed in the queue for printing?
Click file > cancel all Documents
Start > right click on computer > select Manage
Click on continue on window UAC (Vista, Windows 7)
Select Device Manager
Click on the + sign next to Ieeee... compatible printer
Right-click on the printer driver and select uninstall
Click on the + sign next to the imaging device (s)
Right-click on the printer driver and select uninstall
Click on the + sign next to printers
Right-click on the printer driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the printer driver and select uninstall
While the printer is turned on, unplug the cable from the rear
Unplug the cable from the wall outlet
Wait 5 minutes
Plug the cable into the wall jack, and then the back of the printer
Restart the computer
Go back, and then restart the print spooler
Go to the manufacturer's website and search for updated drivers
Tags: Windows
Similar Questions
-
Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?
It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.
-
I've made a mess of the implementation of PSE14 and feel that the easiest thing would be to start from scratch. I can do it and how?
Simply start a new catalog in the menu of the Organizer:
File > manage catalogs
Click on the new button, choose another name and save
When the empty catalog launches, you are ready to start with the import.
-
When printing from Elements 9 the Epson 1400 says it is not ready, yet it prints a document from the internet
triple post
-
HP Officejet 4620: Can scan, print test pages, but not documents
Printer stopped last night. Have you tried to reconfigure the printer, router & mobile. I can scan and trigger test print from laptop so I assume that the connection is good, but it will not print the 3rd part of Word, Photoshop, etc.. The levels of ink and paper are all well. Any suggestions?
Yes, it worked - if she always says the driver Version: 2.0 so I don't really understand what happened to the problem on three different computers at the same time or how the fix has fixed - but it works, thank you!
-
When I open a PDF document that was sent to me, I get a message that says please wait.
It indicates if the message do not finally, my Viewer PDF my not be able to display this message. My PDF Viewer is up to date, so I don't understand this question.
Thank you
Save the document on your local drive, then open it.
-
What version of Adobe allows you to change the orientation of the page on some pages and save the document (PDF) with only a few of the tours pages?
Adobe is the name of the company, not the software as many people say. Since you want to know the exact software, it is important to know that.
Any version of Acrobat Standard or Acrobat Pro to do this. These are commercial software (a cool weather or subscription). The free Adobe Reader or Acrobat Reader cannot do this.
Tip: there are two ways to turn the pages; alone will save him.
-
My designjet 430 printer shows ready but does not print troble shoot shows like loan
I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help
Your first point of contact should be forums of HP. Here you will find specific knowledge on HP printers.
-
Hello world
I tried to figure this out for the last three days. I've tried everything I can think and search all over the internet (GitHub, Forums, etc.). I'm not a javascript Wizard, and certainly a Newb Extendscript.
Try to determine the color space of the document. Last attempt was...
alert(theDoc.properties.ColorSpace);
Reminder on this:
I have a datamerge which creates the attached fields from a CSV file. It is an internal reference to a color code. I am able to test cycle using the for loop an enter the color code. But I can't seem to find a way to seek the shades. One thought was to put in a table and sift through them. The color code provided is not swatch set name that makes things interesting. For example, name is 2297R - 19995, where 2297r is the color code for the text frame. Possible?
main(); // this is the function function main(){ // setup some variables var theDoc = app.activeDocument; // active doc var thePage = theDoc.pages.item(0); // first page var theSwatches = theDoc.swatches; var list_of_swatches = theDoc.swatches.everyItem().getElements(); var n = theDoc.swatches.length; var color; var rgbValues; var i; var t; //Get all groups for this document: var theGroups = theDoc.groups; var theLayers = theDoc.layers; // Color Codes var primaryColor = thePage.textFrames.item("Primary Color Code"); var secondayColor = thePage.textFrames.item("Secondary Color Code"); var accentColor = thePage.textFrames.item("Accent Color Code"); var matchGarmentColor = thePage.textFrames.item("Match to Garment Color Code"); var lightTonalColor = thePage.textFrames.item("Light Tonal Color Code"); var darkTonalColor = thePage.textFrames.item("Dark Tonal Color Code"); var neutralColor = thePage.textFrames.item("Neutral Color Code"); var greenColor = thePage.textFrames.item("Green Color Code"); // Code Codes var primaryColorCode = primaryColor.contents; // var secondaryColorCode = secondaryColor.contents; // var accentColorCode = accentColor.contents; // var matchGarmentColorCode = matchGarmentColor.contents; // var lightTonalColorCode = lightTonalColor.contents; // var darkTonalColorCode = darkTonalColor.contents; // var neutralColorCode = neutralColor.contents; // var greenColorCode = greenColor.contents;
Help or advice is greatly appreciated.
Thank you.
Hello
... There is a third source eventually:
-content of the 'PartOfName' examination if there are spaces inside - in this case the search() method returns "-1"thus."
(i.e. warning (PartOfName.length) ==> is it == 5?)
Jarek
-
as said in the question, I was sent a document to the signature using echosign. When I try to open it, a screen pops up saying script is busy. I have the choice to continue or cancel. I chose to continue and nothing happens. a message left next to Mozilla Firefox indicating does not. Yet once the same screen on script appears again. If I use Internet Explorer, it will open. But I don't want to use I / E. Also, I go to a site called hpcau and the log in page appears. When I try to log in, my information disappears and the journal is empty. What can I do?
Hello, wool here EchoSign support.
Although we do not think that there is nothing wrong with EchoSign in this situation we would be grateful if you could submit a case to EchoSign support to [email protected] so that we can consider the issue a little more. Also, please include a screenshot of the error occurring if possible.
Thank you
EchoSign support -
When I click on he App Store update, he said first a reboot is required, then it just happens before the restart, a pop up advising me that updates have changed and offers 2 options: 1) cancel, which does nothing and 2) show invisible characters, which also does nothing. I rebooted several times and it still does not work. What should I do?
In some cases, this error message is caused by a problem in the network. Please restart your router and your device at wide band, if they are separated. If there is no change, see below.
This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.
Please, back up all data and read this message before doing anything.
Triple-click anywhere in the line below on this page to select this option:
/var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
-
Problem with wireless printing: can print test page, but not documents
PhotoSmart Plus B210a with MacBook Pro running 10.7.4
I can print a test page, but not a document. The message from the print queue is "the printer is not connected.
I started today be able to print from my computer, but not a second computer.
I followed the advice of HP support including an update of the LION driver download.
I deleted and added the printer on both computers.
Now I can't print from my computer.
Furthermore, why did I have to find in an HP forum on the new drivers. Should not the printer HP offer update me the information?
What is the download you have installed? : http://support.apple.com/kb/DL907
Reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
Using Windows XP
The printer can print its own summary of the situation so that the printer itself is functional.
Tried to disconnect and reconnect all the cables to and from the computer
Any suggestions will be appreciated.(1) resources for the resolution of the printer in Windows XP problems:
http://support.Microsoft.com/kb/308028
(2) Troubleshooting for when you cannot print in Windows XP:
http://support.Microsoft.com/default.aspx/kb/314085 MD MOEEN AJAZ KHAN - MCP, N +, A +.
-
If you print a document from an e-mail, why is the document different on another computer? The pagination is different, and my boss thought that I modified the document? I have not change the document - I just printed it e-mail, he says than the version printed on different is his version on his computer - and I have nothing but print it.
Could answer you my question today?
Thank you
Hi MBS_PITT,
The print can be different depending on the print settings and the settings of the computer on the other computer. If you want the same settings, then you should change the settings accordingly before you take the print out.
For more information, you can consult the following article:
Hope this information is useful.
-
My Pixma MP495 will print and copy, but wont scan. Just says that it cannot detect scanner...
Hello
Make sure that the Acquisition of Image Windows service is started.
a: type Services.msc in the start search box and click on enter.
b: now, look for a service called Windows Image Acquisition
c: Double-click the service and make sure that it is detected and set as Started.
d: click apply , then ok.
Good day!
Maybe you are looking for
-
Phone calls via bluetooth headset.
Can I answer the phone calls on my Apple Watch and hear the caller through my bluetooth headset paired instead of through the loudspeaker of the watch?
-
When I download firefox 10 it says that the file is corrupted
The load down to firefox 10 returns file is corrupted. Any suggestions?
-
Re: Adding bluetooth to L670
Hi guys I have a satellite L670, model number short PSK3EE and I was wondering if is was possible to add INTERNAL bluetooth on this laptop. Under the keyboard next to the wireless card is an alternative location, and I was wondering if I could use it
-
How to display dynamic menu with the parent and the child using c# and sql server
Hello Can you tell me What is menu given Dynamics example How can u use my dynamic menu added project in c# This menu is display with only the data from sql database. Menu with the help of a parent node and a child. check the element all in sql serve
-
How can I restore my laptop to the original without a backup disk settings
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: i have a laptop of hi quality and was not provided with a backup with the purchase.how disk do my original rear 2 portable format You hav