my home group is unable to get wireless access to their laptops, why can not solve this problem?
We have a main pc that is connected to the computer via ethernet. everyone in the House has a laptop computer. There are about 5-6 laptop computers used in the House. all of a sudden, no one has access to the internet and I cannot understand why or how to solve the problem. However, the internet connection of the pc remains strong. Why?
Hello Lena Charles,.
Thanks for your post. Please specify what can and are not accessible so that we can better help you. You mentioned all of a sudden, "no one has access to the internet and I cannot understand why or how to solve the problem. However, the connection of the pc to the internet remains strong. "
We can't wait to hear back on your part.
See you soon
Tags: Windows
Similar Questions
-
I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?
Without knowing what is happening when you try, it is difficult to recommend troubleshooting. However, one of the first steps is to ensure that you don't have to reduce the Motion activated in accessibility.
-
Hi my PC had a sound problem when I try to play music, he invites a message that says code codec is necessary, and another thing is that my volume settings are disable that I can't put my volume of how it should be, because it says it is set wrongly with dubbing high setttings for volume to be properly defined.
Hi Marc Bopape,.
1. what operating system is installed on the computer?
2. What is the accurate and complete error message you get?
3. don't you make changes to the computer before the show?
4. What is the format of the file you are trying to play?
5. what application you use to play the song?
6. What is the brand and model of the computer?I suggest you try the steps from the following link:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsAdditional information:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsCodecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNote: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.
-
He is an all-in-one printer scanner copier fax. Scan and copy. It is said to put off then powered to correct the problem. That did not work. Even tried turn off my computer and the printer and then turn it all back on. The scanner light is one heck of a noise when you turn it back on it and it flashes all by making all that noise. Part of the printer still works.
Hello everyone
The products you are commercial printers. I suggest you post in the forum for HP Business Support for a better chance to find a solution.
You will find the Board Commercial Laserjet here.
http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413 -
I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?
Hello Lope8725,
Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?
In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:
If iCloud backup could not be completed or if you can not restore
or
If your iTunes backup could not be completed or you cannot restore from a backup
See you soon!
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
I removed the toolbars so I could see below thinking that I could easily get them back, but I can't. How can I get back them? I can't even put a new web address now. Or refresh a page. Or go to the front/back. How can I solve this problem?
It depends on how you
- Choose the Mode "full screen" or
- unchecked toolbars
The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).
If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:
- Right-click in the empty space at the end of the tab bar
- Press the ALT key or the F10, the poster Menu bar, click View > toolbars
- Firefox > Preferences > advanced > General tabFirefox > Preferences > advanced > general tab
- Hold down the ALT key and type the letters of the keyboard V T
- the URL/address bar, buttons previous/next, refresh/reload buttons are located on the Navigation toolbar
- See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
- Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
- Also see-> http://kb.mozillazine.org/Toolbar_customization
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
I can't make or recive MY applewach, the onely thing I get is a notification of a missed call, what I can do about it, how can I solve this problem?
Hello
It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.
Otherwise, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?
SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.
It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.
So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.
-
When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?
I'm not that computer literate and do not understand what needs to be fixed.
This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.
I use ESET Antivirus Node32 software.
Hello
1. What is the error message or an exact error code?
2 have you made changes on the computer before this problem?
3. you try to check the updates?
I would suggest trying the following methods and check if it helps.
Method 1:
Reset Windows Update components and then try to download the updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Method 2:
File system scan tool checker and then try to press Ctrl + Alt + Delete and check.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
http://support.Microsoft.com/kb/310747
Please respond with more information so that we could help you more.
-
On startup, I get a notice that I entered missing RUNDLL 32 how can I solve this problem?
Hi TomNutt,
· Did you do changes on the computer before the show?
· What is the full error message?
Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
-
Using Windows XP Profwssional.
(1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?
(2) can I use this feature when both computers are on the same network?
Hello
(1) you must configure your computer to use the remote control - see here:
http://www.winxptutor.com/raenable.htm
and don't forget to make the firewall exceptions
(2) this function works on the different network also (so a computer can be in the United States and one in Australia)
Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.
LC
-
I keep getting "C\WINDOWS\system32\rundll32.exe" when I try to do something in the 'Control Panel'. How can I solve this problem?
Hello
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
· What is the number and the model of the computer
Try the steps listed in the link below and check off the results: cannot find the Rundll32.exe file when you open the control panel: http://support.microsoft.com/kb/812340
-
Whenever I try to download something, he said that he could not access APPDATA Error 1606. How can I solve this problem without any of my stuff getting deleted?
Hello1. what Internet browser do you use?2 are you having the same problem with other browsers also?Method 1: I suggest you try SFC running [System File Checker] scan on the computer that would be a system file corrupt on the computer search and replace.Method 2: If the problem persists, you can try the steps mentioned below and check if it helps.(a) click Start.
(b) type regedit in the Start Search and press enter.
(c) access the site mentioned below."HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"(d) then change the appdata read "% USERPROFILE%\AppData\Roaming" thingNote: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Hope this information is useful.
Maybe you are looking for
-
Hello: I use FCP 7 to edit video, we turned on XDCAM EX 1080 p 30 35mbs (variable). Our customer sent us some images shot on XDCAM HD422 1080 p 30 50mbs and, for the life of me, I can't get the audio to stay in harmony. I dropped it in a sequence w
-
Node property/reference for the image and 'Create VI' inconsistent control?
Hello I encountered this problem several times already and although I have worked around him, so far, I would really like to understand what is it: If I have an image display control on the Panel before (IMAQ Vision, not the image control type) and d
-
LaserJet 1018 will not work on windows 7
I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit. I just built a new PC and put Windows 7 Home Premium 64 - bit on it. The drivers on the HP support site will not work. When I try to print something, it is sent to the printer a
-
Driver ACPI\HPQ0004 on laptop HP Elitebook 8560p
Hi all I have a unknown hit-and-run driver ACPI\HPQ0004 I need fixed. Model laptop is HP Elitebook 8560p Forums to search the solution seems to be to download HP 3D drive guard. However, it is already installed and the problem still persists. Can som
-
Networki cannot downlosd Flash Player
my PC says that it is incapatible