my hp 6500 has does not print with my laptop running Windows 8.1 (big difference)

Similar Questions

• Wireless printer does not work with the laptop running Windows 7

  Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

  The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
  They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

  and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• HP photosmart 8150 does not print with Vista

  Why my printer does not print how can I solve this problem

  The pilots say they work properly even though they may be bad drivers (not always, but often enough). You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers, firmware and/or software (and you should get those updates for the printer and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  The versions supplied with the printer are more likey obsolete and you want the most recent available.

  Do you get errors on the screen or on the printer (and what do say EXACTLY)?

  Pay attention to the installation instructions.  Not only certain tasks requuired, but sometimes they should be done in a certain order or the process will not work.  Check again the indications (or contact the HP support) and follow them to the letter.  Frankly, I would contact HP who willl be faster and much more liekly to work in the end. http://welcome.hp.com/country/us/en/support_task.html.  Why fuss about it when they will be more than happy to help you?

  I hope this helps.  Really shouldn't be much more difficult than with the previous printers unless you've never used Vista before - that can make a big difference.  Installation and configuration of sharing are very different.  Also, there may be some settings of the printer itself that need to be addressed to make things work correctly - but I do not (but HP will be).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• 6500 a does not print. iMac w/OS 10.6.7. Message says full spool area.

  My 6500 has stopped printing my iMac, although it doesn't thin test.  (Test sheet can be requested OK computer, not only on the 6500 has).  Operating system is 10.6.7.  Problem of thought was a low-ink warning, but install the new cartridges did not print back.  HP utility present receipt of the file and (briefly) a message that printing is 98 percent complete.  Then a few moments later she stops, displays a message indicating that the "spool area" is "full".  The printer starts to "lazy" and no indication of the file disappears.  Rotation off (wait) and then on new printer did not correct problem.  Is it possible to clear this area of spool, so that the 6500 has going to print?  Thanks for any advice.

  Well Yes, we will reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP LaserJet 6 p printer range does not print with windows 7

  I installed the drivers that came with Windows 7, but the printer does not print. I run the diagnostic tool; It removes the work and says it's fixed.  It is not the case. HP says they cannot help.   I love my 6 p and would rather not have to buy a new printer.  Can anyone help? Thank you.

  Windows 7 does NOT support printer HP laserjet 6 p.  It is a HP note:models 6L and 6 p in the LaserJet 6 series are NOT supported in Windows 7  I got and downloaded the driver on the Internet somewhere by typing: driver of HP laserjet 6 p.  You can check the box to add printers over the Internet.  I'm not looking for the process.  Try and I hope it helps.  In the meantime, I'm troubleshooting why my 6 p prints (parallel to 6 p and USB for laptop HP cable).  Don't forget the impression of 'biodirectional' is not checked in Ports (USB001, 2 or 3) place (lower-left) in Device Manager. Right-click on your printer, you will see 'printer properties '.  I say that linear, but you will get it.  Let us know.

• Printer does not print with new cartridges

  After I changed the cartfidges the printer does not print anything. No black and no color. Out of curiosity, I noticed that the old cartridges were still half full because I compared the weight. So I put the inside once again but not print. Only a few pale almost unreadable characters. This happens usually when the printer is dirty then I ask for a cleaning. But I'm still without printer.

  My printer is a HP 980CXi and I have now, I was very satisfied. I've heard that some printers are programmed to be used a period determined, while they are blocked. If this is the case. Please be so kind to tell me does not search for a solution. Too bad I bought a pair of cartredges for nothing.

  Hello Yaio,

  Welcome to the HP Forums.

  I see that you experience a problem when you attempt to print in black ink and color.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I also suggest that you take a free cloth and some bottled water and clean the contacts on the ink cartridges as well as contacts in the printer and then dry them off, reinstall the ink and try a test print.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• ePrint does not print web pages of Tablet Windows 8 Microsoft Surface

  ePrint does not print web pages of Windows 8 (x 64) Microsoft Surface Tablet

  Any ideas?

  Hello JereTanner,

  Welcome to the Forums of HP Support!

  I see you are trying to print web pages of a tablet of Surface. What model printer you are trying to print to? Also, is there an error, message, etc., when you try to print?

  In general, ePrint is used when printing emails or transmission of documents / photos to the printer address, is the next how you try to print a web page?

  Since it is a Windows 8 operating system, you can be able to install the full features software and print that way. When I know more about how you want to print, what happens when you try and which printer you are using, I will be able to help.

  See you soon,.

• "The product key does not work with this edition of Windows 7", but I have not changed anything

  Suddenly this week 7 Windows has stopped working and the error message said I might have a non-genuine copy, etc.   I checked the product key by using the Start/computer/properties menu. The product key was not the same as on my PC, so I tried to get the right version. Then I got the error message that you have entered the product key will not work with this edition of Windows 7, and I want to run Windows 7 set up or enter a professional product key.

  I saw that someone else had been advised to run MGADiag.exe so I've already did but am puzzled by the report.  And I'm worried, why me nice Acer desktop PC suddenly did that, when he had worked happily with normal updates etc.  The report shows a different product to the label of my PC key.

  Can someone help, please

  Thank you

  Andrea

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - FCTV3 - P9RTC-F9C3D
  The Windows Product Key hash: G7PayGi + xFabXK4wlLkFbNDozpA =
  Windows product ID: 00371-619-5427791-85058
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {AC5B74A9-0098-41DC-ACF4-BD8449D66609} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140706 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC5B74A9-0098-41DC-ACF4-BD8449D66609}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-F9C3D00371-619-5427791-850585S-1-5-21-1356999665-2362789505-4127209914AcerAspire X 3812FRIENDP01-A020090816000000.000000 + 0007A043C07018400F808090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-619-542779-01-2057-7601.0000-2042014
  Installation ID: 007595347832785135952380495674625140911753099524272431
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: F9C3D
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 3
  Trust time: 02/11/2014-18:36:20

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 11:1:2014 20:45
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LAAAAAEAAQABAAIAAAABAAAAAQABAAEA6GEkRoSxVFESavzCioZogPYoTFg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1457 APIC 081609
  FACP 081609 FACP1457
  HPET OEMHPET 081609
  MCFG 081609 OEMMCFG
  SLIC ACRSYS ACRPRDCT
  081609 OEMB1457 LASRYVITRAGE
  GSCI 081609 GMCHSCI
  AWMI 081609 OEMB1457
  SSDT DpgPmm CpuPm

  Moved from programs for Windows 7 Forum.

  Code of Validation caching online: 0xc004c4a2

  Your product key is blocked. suggest you try to activate by phone, they may be able to help you enter the product key on your sticker or say why it is blocked.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• C4480 does not print after upgrading Vista to Windows 7

  Hello

  I bought a C4480 & installed on my laptop running Vista.  I bought recently installed Windows 7, it & printer worked OK. 2 days ago HP sent the file: PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140.exe, (1/1, 205.09 M)

  I downloaded & installed, now the printer does not print. It scans ok just will not be printed. Called HP & said it was Microsofts problem. told by Microsoft of $ 80 or reinstall my computer back to the factory default settings. Not knowing much about computers I'm not want to do. The computer tells me the spool of printer off & to start but when I open the printer spool is on. I hope you understand that this is my 1st post.

  There is a patch for this here.  Try it!

• My Adobe 5 does not open with my version of Windows 7?

  I recently bought a new computer with Windows 7.  The last two days trying to open various components thanks to Adobe, he said that my version of Windows does not work with Adobe 5.  I need to get this support as soon as possible.

  Acrobat 5 is not compatible with Win 7. Nothing that anyone can change. You need to buy Acrobat X or to resort to the free software Acrobat Reader.

  Mylenium