My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

Similar Questions

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Microsoft LifeChat LX-3000 will not work with the yahoo chat

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  "Wyodragon" wrote in message News: * e-mail address is removed from the privacy *...

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...
   
  http://www.Microsoft.com/hardware/
   
  When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• computer will not start with the disc

  I use vista and my computer does not start because of a corrupted file.

  I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

  I changed the bios to boot from the cd as first choice but still no results.

  can anyone help?

  Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

  I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

  Any help would be greatly appreciated.

  If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

  The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

  What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

  Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

• InDesign objects are not locked and will not move with the mouse click.

  I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

  I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• Wireless will not allow on the laptop HP 2000

  Help! I have a laptop HP 2000 and all of a sudden the wireless function does not work. No matter what I do the rest orange button. I don't have Wireless Assistant installed on this computer. I tried to download it from another computer and install to mine, but he stated that the version has not accepted. I only got this computer 6 months. Any suggestions would be greatly appreciated.

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) disconnect the battery & adapter then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios & Wireless driver from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.