My HP Deskjet 2480 printer is not in the installation options. I can't print.
OT: printer.
My HP Deskjet 2480 printer is not in the installation options. I can't print.
You can download the latest driver to:
http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F2400-all-in-one-printer-series/3811093/model/3811136
Tags: Windows
Similar Questions
-
I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.
You can check this article, but it's about Firefox itself do not have access.
Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.
-
Trying to activate my brother Printer HL-2270DW with Dell Inspiron Mini. It is not on the Mini CD and can only find HL-2170DW. How can I get this printer to connect without using the disc?
Please do not let your Windows version a secret.
Find the driver here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl2270dw_all
Install the driver and then connect the printer.
-
Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?
The duplicate thread information:
Cannot connect Epson scanner/Nikon camera to printer!
Hi Carolyn has Culp,
Thanks for asking this question to Microsoft Community!
I understand that your scanner and Nikon camera is not getting recognized in windows vista.He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.1. have you made changes on the computer before this problem?
2. What is the brand and model of the scanner?
3. are you an error message or error code?
4. is that your other USB devices work?I would suggest trying the following methods and check if it helps.Method 1:
Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.Method 2:Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-usMethod 3:Remove and reinstall all USB controllers.To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Method 4:To update the chipset drivers and check if it helps.Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
Reference:The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problemsIt will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
1 LASERJET PRO CP1525nw
2. Windows XP
3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.
4. no change
Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.
-
Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact. It's all music, with no video media. By default seems to be a list that is unchangeable.
Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.
TT2
-
'Manage account' does not appear in the Synchronization Options - how can I fix?
'Manage account' does not appear in the Synchronization Options - how can I fix?
It will be great if you could share a screenshot of what you see.
What you trying to do?
You have already set up your sync account? This is the only case that comes to my mind that prevents you to see the drop down menu. Take a look at this article and let me know if it seems familiar: How can I set up Sync on my computer?
-
I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.
I tried the following:
1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.
2 tried the Verbose mode and did not work
3. I tried command mode S did not.
4. tried to zap the pram was not working.
5 a couple other things that I had read, but nothing helped.
It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.
PS: also tried boot from the original disks as well, but no luck.
You said "PS: also starting from the original disks tried both but no luck."
Exactly what happened when you tried?
Have you tried formatting the HD?
Have you started the installation of SL?
-
Windows 7 does not recognize the installation discs
Hello
I have a problem, and I don't know if there is a solution, but here goes.
My laptop is a HP DV6-7029WM Windows 7, 64 bit.
The hard drive was dead, and he was replaced last month. I sent it to HP. C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.
When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.
After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC. I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.
I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close. I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.
I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.
I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore. My problem is the same as this poster on CNET. I can read DVDs and CDs. Those that work very well.
http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/
The files are on the DVD, because I see them.
I don't know what to do. Should I send my PC back? Can I do to solve this problem?
Thanks in advance.
pen
Hello:
With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.
Select the F9 boot menu option.
Select the DVD drive on the list of bootable devices, and press the Enter key.
Watch the screen for additional instructions.
-
I installed several card games again and had no problems. But when I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation. I have
Windows Explorer and uninstalled until I reinstalled it. I've done 4 times. He went all way through the process, than to see a message that Setup could not be resumed. Given that the other two disks of Hoyle have been correctly installed, why do I have problems with the drive of Hoyle puzzle and board? I contacted Hoyle and does everything that they told me to do. But without success. What could I do it wrong?
Hello
(1) what is the operating system that you use on the computer?(2) you get error codes?If you use Windows 7, Hoyle Board Games is not compatible with Windows 7.You try to install the game in compatibility mode.Click on the below link to check the compatibility of the game.You can check the link below:Make older programs in this version of WindowsYou can check with the manufacturer of game for patches to run the game on Windows 7.
http://support.Encore.com/I hope this helps! -
I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD
Hello
What is a model supported by your version of Windows? You could just plug it in and see if Windows recognizes
and they get the drivers off of the internet. Although it is recognized that you should always check the manufacturer's website
new drivers and control software.Check with the site of the manufacturer of the camera brand and model you should be able to download the necessary software.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My partner loves Cityville and Frontierville. Recently she can't read them on his laptop. He keeps asking him to download flash player 10. It does not cure the problem. I can still play these games on main pc
As a general rule, it allows to uninstall completely all the previous versions of Flash Player before installing a new one. See the following articles:
Uninstall Flash Player: http://kb2.adobe.com/cps/141/tn_14157.html
Troubleshoot Flash Player installation: http://kb2.adobe.com/cps/191/tn_19166.html
Common download problems and installation of Flash Player: http://www.adobe.com/products/flashplayer/support/index.html -
I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?
Hi BartlettNYC,
Please see the links below, to solve the problems with Window XP SP3.
Steps to take before you install Windows XP SP3.
http://support.Microsoft.com/kb/950717
How to troubleshoot a windows XP SP3 Installation failure.
http://support.Microsoft.com/kb/950718
Good luck.
-
Problem reinstalling Windows XP
I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation. He goes back and reinstall Windows again. I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?
Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.
Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.
-
My explore menu does not display the drives. How can I solve this problem?
Original title: hard drivesMy explore menu does not display the drives. How can I solve this problem?
Hello fpiraro,
Thanks for the return of the response. Please visit the link below and let us know the status.
My drive does not appear in Windows Explorer
http://support.Microsoft.com/kb/330140
- Microsoft Windows XP Professional
- Microsoft Windows XP Home Edition
- Windows Vista Business
- Windows Vista Business
- Windows Vista Home Basic
- Windows Vista Edition Home Premium
- Windows Vista Starter
- Windows Vista Ultimate Edition
- Windows 7 business
- Windows 7 Home Basic
- Windows 7 Home Premium
- Windows 7 Professional
- Windows 7 Starter
- Windows 7 Ultimate
Maybe you are looking for
-
Why Firefox tell me that I still have an old Adobe Flash Player
Adobe and Windows Web site tell me that I have Flash Player installed 18.0.0.232. Why then the Plugin Firefox status checks status I have Flash Shockwave Flash Player 16.0.r0 16.0.0.235? How can I get rid of 16.0.r0?
-
BlackBerry work 10 text Message Notifications not
Hey there, so I updated my software the 10.2.1.3062 weekend and since then have not been getting informed when I get a text message. No sound or LED. I tried to pull the battery, restart several times and it doesn't seem to help. I have to go on the
-
Routing over VPN between ISA550W and RV215W
Hello all I have a problem with the VPN between my two office I have an ISA550W at the head office (chcnorth) I have a RV215W to the remote desktop (chcsouth) the VPN is up and running, I can connect from Headquarters to remote control (chcsouth-RV21
-
Error ID Blackberry blackBerry Smartphones
Hello I have problems logging in to my blackberry id. I first had problems app World and it says an error code. I came on this forum and read the common solution is to do a cleaning of the plant, so I did and now it still does not. Also, since I have
-
When I click on color chart or color in the upper right corner, it's just in the background color and foreground color, how can I fix it?