My HP printer works with IE 8, but not firefox 3.6

Similar Questions

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Train with webutil works with the browser, but not with webstart JNLP 12 c

  Hello

  I set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.

  In some forms, I use webutil.

  I can run forms without webutil with the browser or java web start (everything works fine).

  I have problems with the forms use webutil tha, they work very well with the browser, but not with java web start.

  When I run forms with webutil and webstart I see all white and the "crash" application: I must leave because other forms without webutil also do not work.

  Here is my config in formsweb.cfg:

  [Appws] <-start java web

  form = nomeform

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  WebStart = on

  [appnows] <-no java web start

  shape = mercurio

  separateFrame = true

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  What could be the problem?

  Gianpaolo

  Remove Appws:

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  Add frmicons.jar and jacob.jar to $ORACLE_HOME/forms/java/extensions.jnlp.

  and try again.

  Concerning

• I changed my apple ID password. I restarted my computer and my iphone. My new password works with my laptop, but not my iphone.

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  iowaoma wrote:

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  Apps are tied to apple id and password that was used to download/purchase it.

  Try your old password and see if you can update or not.

• Free disc of Premiere Elements with the new camera. Installed on the pc and have shortcuts for items and items first. The serial No. work with Premiere Elements, but not Photoshop Elements. Why is this?

  Hi, I'm new to this bear so please with me. I have a free disc of Premiere Elements with a new canon camera and install it on my pc windows 8.1. After installation I have a shortcut for first elements and a shortcut for the elements, I guess that first for the video and photo elements. The drive came with a serial No. who worked with first, but when I opened elements, he asked for a serial No. but when I tried the same series only.  It says this serial No. is not valid for Adobe photoshop elements. I'm something wrong, I am missing a serial number, do I have to pay to use the side elements (photo editor), and if so I don't understand why he loaded the two programs on a disk I thought it was a big split in video and photo program.

  Help, please.

  Photoshop elements and first elements are two different programs (as you know).  they have different serial numbers used to activate them.

  If you were supposed to get both with your camera, you should have two serial numbers: quickly find your serial number

  However, is it possible that you had only to get a serial number of elements first and photoshop elements was provided as a trial (to see if you want to buy a serial number)?

• FX: Model works with mx datagrid but not spark?

  Using the example of Lynda,... MX DataGrid works but the spark does not work?

  Model is new to Flex 4, shouldn't it work with the spark?

  < fx:Declarations >
  < fx: Model id source="data/products.xml"/ 'productModel' = >
  < / fx:Declarations >

  < mx:DataGrid dataProvider = "{productModel.product}" / >
  < s:DataGrid dataProvider = "{productModel.product}" / >

  Model is not new.  Spark DataGrid requires a mx.collections.IList.  A model

  is does not implement that.

• ToolTip works with MS IE but not in Firefox

  Hello
  
  I have Image buttons that bear a label. Running the application in MS IE, the tool tip appers in a few seconds when I stop with the mouse on the e button. But not in Firefox. I couldn't find the Firefox settings that would allow a ToolTip. Did all an enconter this 'feature '? I have Firefox 3.6
  
  Tamás

  Tamas,
  check if the label property is used is ALT or TITLE, I believe IE also shows ALT as a ToolTip (if the TITLE is missing), while Firefox is not. Firefox only displays the TITLE as ToolTip, I'm sure he doesn't know ALT because that which is intended for the display of the text where the images are missing.

  Flavio

  ----
  http://oraclequirks.blogspot.com

• Have iMac, PS CS4 and printer Epson R2880. Has been offered a free upgrade to Yosemite and now the PS do not print. Printer works with the finder, but no PS all updated without having to learn a new system?

  Macintosh in Photoshop (read-only)

  Also, update you your CS4 after the new installation of the download?  It should be to Photoshop CS4 version 11.0.2.

  All Adobe Downloads (other than updates, of course) install the original version and must be updated.

  He knew printing bugs in earlier versions.

• Printing problems with PS CC, but not CS5 or CS6

  When printing the PS CC using the print dialog box I get a shift toward the severe red in the final print. When I print the image of PS CS5 or CS6, I get correct color printing.

  I am running a MacPro with OS 10.7.5 and a cannon with its latest firmware iPF8300 printing and the printer driver. I use the correct ICC profile for the paper. In the print dialog, I select 'Photoshop manages colors. "

  I noticed a couple of things:

  1. In the 'Print Settings' where I dial in the installation of the printer, 'Color' parameters are both disabled (Colorsync and seller).
  2. In the printer driver settings (still in "setting up the printer"), the "Color" tab is grayed out, but when I click on "Settings" for this sub-group of experts, Colorsync is selected.
  3. When I printed the image of the Canon PS plug-ins, the Red cast had disappeared, but blacks were too heavy (there is no box "Black Point Compensation" because the Canon plug-in uses Adobe Color Engine for this, and it is only 32 bits and will not work).

  An overview or advice would be appreciated.

  14.0 Photoshop or CC must be added to your AppColorMatchingInfo.xml file. This is the extraordinary case file that the driver of Canon reads so that when the application handles color is selected in the print driver in main/color Mode dialog box: by default, without Color Correction. If the name of the internal file of the application is not listed in the file AppColorMatchingInfo.xml main/color colours resulting in double default profiling Mode.

  If anyone can send me the Info.plist file inside the package 14.0 Photoshop or copy - paste or screen captures the Excutable file until version lines I get this problem in my updated AppColorMatchingInfo.xml file that I posted.

• vCenter 5.5 sso works with web client but not for vsphere client

  Hello

  Just upgraded my vcenter from 5.0 to 5.5. In 5.0, I could connect to the vSphere client, using my creds of windows session, but now I can't and have to use the local account that is a member of the Administrators group local machine or [email protected]. However, it works very well with the web client.

  The Source of the identity seems to be correctly set. Have searched for a solution for four days. I'm at my wits end... :-(

  You may need to assign permission to your vCenter, refer to step #6: Back To Basics: vCenter post-configuration 5.5 installation (Web Client). VMware SMB - VMware Articles blog

• Password works with i tunes but not with apple TV

  Have not used my Apple TV for some time. My password works on PC and I have Pad aps but spent a lot of time trying to connect on apple TV. Very frustrating.

  Judith

  I have the same problem, my password works everywhere but my apple tv... omg, it's so flustrating.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• I can't synchronize my android device. Sync works with other devices, but not on the new Android device.

  I use ff on two other Android devices and two pc under windows without any problem. I bought a new phone and I couldn't sync somehow. Whenever I'm trying something new, ff considers my attempt to sync to a new account.

  There is a new system of synchronization, if you have an older synchronization account see https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync migration to it.

• Flash works on Internet Explorer, but not Firefox

  I have Windows 8. I have the latest version of IE and Firefox. I have Adobe Flash downloaded 12.0.0.44. I had to do it in Internet Explorer. I was not able to download it in Firefox. I downloaded Adobe Shockwave 12.0.9.149 in Firefox and activated in the plug ins. He always tells me that I need to download the Adobe Flash Player. I downloaded it. In firefox, when I try to download it again, he told me that my antivirus software would I want to download the software, it does. I allows people with reduced mobility and it still does not work. It does not appear the yellow download now bar that displays in Internet Explorer. I need FF for a correct use of my company's Web site. I can watch videos on youtube/espn fine under IE, but he always tells me to download it when I'm in FF. I got FF several times but have not restarted my computer if that's the case. I'm going now. If not, please let know us what I may need to take action.

  SWEET. Backup browser here. I uninstalled and everything works now. It was installed a month before I started working here. Thanks for the help!

• my site works in IE but not firefox

  This is my web page:
  http://www.Andrew-Leonard.co.UK/Mallorca/Mallorca%20ferns.htm

  It usess css to define the layers and javascript to show and hide layers. It uses a system of dhtml menu by Milonic to run javascript code

  This is part of the code for layers:

  <style type="text/css">
  #Layer01 {position: absolute; left: 300px; top: 50px; z-index:1;}
  ...........
  #Layer33 {position: absolute; left: 300px; top: 50px; z-index:33;}
  </style>

  This is part of the javascript to show/hide layers:

  <script>
  function showlayer(layer){
  var myLayer = document.getElementById(layer).style.display;
  if(myLayer=="none"){
  document.getElementById(layer).style.display="block";
  } else {
  document.getElementById(layer).style.display="none";
  }
  }
  </script>

  It works OK in IE but not firefox

  If you select Web Console of Firefox (Ctrl + Shift + K), it will tell you errors is to find and the line of code that is found on.
  The problem, it seems to have at the front is that IDS are case-sensitive: 'layer02' is not the same thing as "Layer02", for example.

  There may be errors once again it happened, but all current browsers come with tools that needed to rule out any other problem.

  In addition to the Javascript reference: https://developer.mozilla.org/en-US/docs/JavaScript