My hp will not go past the blue screen

Similar Questions

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• T43 will not move past the first screen

  My mother gave me this thinkpad because he had a virus (Windows shield Center) and he locked her out of her computer. She could always use Safe Mode, however. When I initially got tried to start, but he walls me an error message "missing hal.dll" and told me to reinstall windows, which I did not.

  I thought that this could be a fluke, but now the ThinkPad won't even go past the first screen that says "To interrupt normal startup, press the blue Access IBM button" without worrying if I press that key, or, the function keys.

  This is as far as I came. What are my next steps?

  This looks like a start of a failure of SouthBridge chips which is very common on these machines.

  Remove the keyboard (but keep that he attached), the palmrest and the wireless card.

  Turn on the machine, then * gently * press the big square under the slot wireless chip.

  If the machine starts normally whenever the square is pressed, a SouthBridge chip failure.

  Good luck.

• Mozilla Thunderbird will not start after the blue screen.

  There was a program that was supposed to update the drivers but caused a blue screen. I had to go back to a previous point of reset to get Windows 7 running again. Now Thunderbird gives me an error "could not load XPCOM" at startup. What should I do?

  I solved the problem as follows:
  1. turn off the antivirus software.
  2 delete the program folder in Thunderbird, C:\Program Files\Mozilla Thunderbird (Windows 32-bit) or C:\Program Files (x 86) \Mozilla Thunderbird (64-bit Windows) by default.
  3. use the browser to download the Thunderbird installer on the Mozilla site.
  4 reinstalled Thunderbird by running the installation program.
  5 turn on antivirus software.

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• Vista will not go past the login screen.

  Recently, I added 2 user accounts for my children.  When I restarted windows would load the login screen, it would go no further.  I click on any of the newspaper in the icons or the icon close / restart and they apear highlighted, but nothing happens.  CTRl ALT DEL does not work either.  I've tired of loading in safe mode and may still not exceed this screen.  I tried restoring the sytem using F11 and select System Restore, and once again, I get to the login screen and will not move any further.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Error 17-Windows will not load past the splash screen, and system repair has no effect...

  Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

  Start "openSUSE 11.2 installer (NET)".

  (hd, 1)

  Specifien type is ntfs, partition type 0 x 7

  /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

  Error 17: File not found

  I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

  I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

  Thanks for any help!

  "Off my laptop the night before, an upgrade has been installed as usual."

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista will not go past the loading screen

  Hey - last night my computer was working fine, I had nothing to open and was watching television, then we had a power cut, I thought everything was fine. But when I went to turn my computer on this morning he gets just stuck at the loading screen (the one with the green bars). I have tried reboot, unplug the unit and system repair, the windows vista startup disk, just. When I put in the disc, it does something together press button as I do, then it loads the files then goes back right screen loading with green bars, he done the same for any route I'm trying. I could use the help because the computer has very important files that I can't afford to lose.

  Thank you

  Try and back up your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  Good luck with it.

  Cheer.

  Mick Murphy - Microsoft partner

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• My iMac will not start past the gray screen

  At startup, the iMac rings and goes to the grey screen where he hangs up and does not progress.

  I tried with the command/R button from Mac, but the utility never appears.

  I tried to start with the SHIFT key down... same thing.

  Is there something I can do?

  Thank you very much!

  Paul,

  My iMac (early 2010) has just started doing the same thing.  Initially, I could start in recovery mode, but download time was 18 hours and time increased.  I stopped the download and downloaded the installation on a USB disk on my MacBookPro in the hopes that I could start the iMac to the USB instead soon and not tomorrow. Now, I can't get the computer to boot on the USB stick or the recovery partition.

  So he can start on the USB key you must hold down the option key when you hear the chimes boot.  Then maybe you can try and have some success.

  If you find something that works to post here, if you think about it!

  Good luck!

• What should I do when the CC will not go past the loading screen?

  

  For a good, long while now I can't spent this loading screen when you try to launch CC. I'm behind on updates and it becomes a real problem. This happened to someone else? How can I fix it?

  Please refer to: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesn ' t - open.html

  Concerning

  Stéphane

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• Try to upgrade to Windows 7 Home Premium and can't get past the blue screen upgrade now

  Try to run the upgrade to WIndows 7 home premium to clean virus problems. have tried for days, unable to get past the blue screen upgrade now.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• window does not go past a blue screen that says windows can't connect me

  Hi I have an older version of windows xp and that you downloaded an older version of quickbooks 2007 program a disc when it said to restart the computer I hit reboot and now my computer will display loading windows and then stop to blue screen with the windows logo, I can move my mouse but nothing happens I (use this computer very rarely) that it is an old but I still need it from time to time. help please. Thanks Rose

  Hi Rose,

  · What is the error displayed in the blue screen?

  · Provide the full error message with the error code.

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx