Help! Impossible to pass food to H8-1414

Similar Questions

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• Help, please! Impossible to pass local account for microsoft

  I got a Samsung ATIV smart PC 500 t as a gift today and I'm going to be very difficult to implement. I tried on and off for about 14 hours now without success.  Here is what happened:

  I've updated the PC software told me to. (there was a brochure stating that I needed to update before using my keyboard dock)

  I put the PC by using a local account, because for some reason, he said it was impossible to add my Microsoft account I created today specifically for this PC.

  I tried several times to switch to the Microsoft account and I get the error message

  "We're sorry, but something went wrong. your account has not been changed to this account from Microsoft.

  "Code: 0x800b0101.

  What does that mean? Why this is happening and what needs to be done to solve this problem?

  I also tried using the tiles, hoping maybe going this route would allow me access to my Microsoft account so that I can at least use the apps and what not.  When you try to open the store, I have this message: 'we are could not connect to the Bank. It could have happened due to a problem with the server or the network connect timed out. Please wait a few minutes and try again. "I also tried via the contacts, messages and weather applications. Whenever I get similar error messages.

  Obviously, I'm not very savvy, connect my internet computer works correctly, I am able to access the various web pages (even if I get a warning message of security for each of them, which is very annoying).

  Anyway, I can't understand this. Does anyone have a tip or useful information? Can I use my PC.

  Thank you!!

  Make sure that your date and time are correct.

  Set the clock - Windows help

  You can also try to create another user account on the computer as an administrator, log in there, then switch to a Microsoft Account.

  

  On your keyboard, press Windows key + C

  Click Change PC settings

  

  Under laptop settings, click users

  

  On other users, click Add a user

  

  

  Click the link log in without a Microsoft account

  

  Click on the Local account

  

  Enter the user name, account, confirm and create a hint, just in case you forget. Click next after you complete these steps.

  

  If you want to activate the Parental control on the account that you just created, check the box, otherwise, click Finish.

  

  Press Windows key + R

  Type: control userpasswords

  Click on manage another account

  Select the account that you just created

  The value of the privilege of administrator account if it has not been defined

  Click OK

  Restart and log on to the account, and then try to switch to a Microsoft Account.

• Help, please! Impossible to pass the local account on the Microsoft account.

  I got a Samsung ATIV smart PC 500 t as a gift today and I'm going to be very difficult to implement. I tried on and off for about 14 hours now without success.  Here is what happened:

  I've updated the PC software told me to. (there was a brochure stating that I needed to update before using my keyboard dock)

  I put the PC by using a local account, because for some reason, he said it was impossible to add my Microsoft account I created today specifically for this PC.

  I tried several times to switch to the Microsoft account and I get the error message

  "We're sorry, but something went wrong. your account has not been changed to this account from Microsoft.

  "Code: 0x800b0101.

  What does that mean? Why this is happening and what needs to be done to solve this problem?

  I also tried using the tiles, hoping maybe going this route would allow me access to my Microsoft account so that I can at least use the apps and what not.  When you try to open the store, I have this message: 'we are could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I also tried via the contacts, messages and weather applications. Whenever I get similar error messages.

  Of course, I am not very computer savvy, my internet connection is working properly, I am able to access the various web pages (even if I get a warning message of security for each of them, which is very annoying).

  Anyway, I can't understand this. Does anyone have a tip or useful information? Can I use my PC.

  Thank you!!

  Hello

  Please refer to following patch and see if that helps:

  http://www.thewindowsclub.com/your-account-wasn

  Hope this helps, good luck :)

• Impossible to pass a variable of type ROWID in a func / proc - can anyone help?

  
  I have the following checksum function compiled:
  
  create or replace the C_SUM FUNCTION (p_owner IN VARCHAR2, p_tname IN VARCHAR2, p_rowid IN ROWID)
  RETURN NUMBER
  IS
  BEGIN
  RETURN OWA_OPT_LOCK. Checksum (p_owner, p_tname, p_rowid);
  END;
  
  However, when trying to pass values in the function:
  
  DECLARE
  I have ROWID;
  j NUMBER;
  x VARCHAR2 (20): = "PRODDTA";
  y VARCHAR2 (20): = "BILL2CUS_CHCK";
  BEGIN
  BECAUSE me in (SELECT ROWID
  OF BILL2CUS_CHCK)
  LOOP
  j: = (x, y, i) c_sum;
  update_BILL2CUSCHCK (j, i); -see code for this proc below
  i: = i + 1;
  END LOOP;
  END;
  
  I get a PLS - 00306 (wrong number or types of arguments) error message.
  
  As update_BILL2CUSCHCK() here is expected at the entrance of C_SUM, she complains that too.
  
  Was surprised to find a complaint about the use of the sign in the i +: = i + 1 - but maybe it's a ROWID thing. Here, any help would be welcome too.
  
  I tried every way I can to get around these, but I'm not.
  
  Can you help me?
  
  Kind regards
  Colin
  
  create or replace PROCEDURE update_BILL2CUSCHCK (MUHC in NUMBER, crow IN ROWID) AS
  BEGIN
  UPDATE BILL2CUS_CHCK
  SET row_checksum = MUHC
  WHERE ROWID = Crow;
  COMMIT;
  END;
  
  

  j := c_sum(x,y,i.rowid);
  

  I is a recording, you must pass the correct item for the function c_sum

• Pavilion Mini 300-050np: HP password help! Impossible to pass to windows 10 on a Mini bought Pavilion today :(

  First post here (I think) and forgive me if this has been asked and answered a million times before... I have looked and could not find.

  Then I bought a HP Pavilion Mini 300 - 050np today and I tried for hours to understand how to change the Windows 8.1, it comes with 10. This thing won't let me install anything without a password for the administrator account on HP to the predefined address and I don't know what it is.

  I tried every number that comes in the box. HP support pages do not mention anything on this subject. Am, I got blocked on my own PC or is there a way around it?

  Thanks in advance!

  Hello @Kutusov,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the question of password and wanted to help you!

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Impossible to pass my Acer Windows 10 desktop computer please help!

  I have an Acer AX14206-U5832 desktop computer I got a message from Microsoft that I can't upgrade to Windows 10. The Message reads: MFG it did not your display compatible with windows 10. So I think I need a new video card and maybe more. He says that my video card is a GeForce NVIBIA G150SE NForce 430. So can I change my video card in this model? What graphics card does take? Is there more that should be? I'm not a technical wizzard!

  Yes, you should be able to add a video card sparate, by replacing the NVIDIA GeForce 6150 SE which is integrated into the motherboard. IIRC there is a x 16 and x 1.

• Impossible to pass to an SSD?

  OK, so I just bought a HP 15-inch touchscreen car braidja color blue. After I installed an SSD, I get a BOOT DEVICE NOT FOUND.

  I rund the hard drive test and pass it. So I call HP and the guy said that my laptop cannot be ugraded with a SSD?

  I assumed all justt what came out in 2014 could be upgraded to an SSD?

  Any help would be great. Tahnks

  No you can't do it this way. Put the hard drive in the laptop and make the HP recovery disks. Use it to restore Windows 8.1 on the SSD.

• HP G60 507DX: Ugh help works forgotten pass

  don't remember not pass sys to disable the code 82114343

  Help, please

  Hello

  Enter: 33872985

  Kind regards

  DP - K

• Please help; Impossible to change the position of my wallpaper!

  I know this isn't a big problem; but I would like it's working properly anyway.  I tried a new image for my wallpaper, and it showed as an image full screen.  I didn't like it then, immediately, I went back to the original image, and it was too full screen.  I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves.  I tried all the different positions and nothing will change.  The image will change, but any image I try is full screen.

  Hi Newsie,

  You can try the following steps and check.

  Method 1:

  You can read the following article and try the methods provided except method 6 and see if it helps.

  Impossible to change the background image in Windows 7

  Note: This article also applies to Windows Vista.

  Method 2:

  You can also try to change the theme of Windows and check.

  Change desktop theme

• Impossible to pass to ICS 4.0

  Hello

  I'm in France, with the new operator phone Free Mobile.

  I noticed recently that PC Companion said Android Ice Cream Sandwich is available, but when I try to upgrade, it gives me the following error message: "Setup error: Impossible to install or start the phone software update components.»

  I have never fiddled with the phone software.

  Hope you can help. Thank you.

  POU (Sony Update Service)... Download and install it on the pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

  or

  http://www.sonymobile.com/global-en/tools/update-service/

  The two links are same

  ________________________________________________________________

• Impossible to pass boot config

  I am trying to upgrade my vista home Prem for wind 7 home Prem I have a drive. When I try - it stops & 'impossible upgrade boot configuration' when I check msconfig, it says just "vista home prem' under the boot section. Help

  Hello

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is the Forum of installation of Windows 7 for questions about installing Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Impossible to pass primary and secondary monitors

  After the upgrade of thinkvantage Productivity Center I can either spend my main monitor.  My secondary monitor works, but only in mode "Extend my Windows desktop on this monitor.".  If I try to click on the button "Use this device as the monitor main." on the top control panel a few whites on the monitor and switches to my main monitor again.

  At the same time, I lost the ability to use the Fn + f7.  Pushing this combination has no effect.  If I pass the centre of productivity and choose Configuration from the device / select display settings nothing happens.  It seems that upgrading the productivity Center has beaten some program is in charge of the evolution of the monitors.

  Any help would be appreciated.

  Hi and welcome to the forum!

  What ThinkPad and the operating system are you using?

  Presentation Director is responsible for the combination Fn + F7, put it back, I suggest:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67364

  Special attention to the instructions: -.

  Installation instructions

  Notes:

  • Before installing the Director of the presentation, he must install a display driver appropriate for the target system and the "Lenovo System Interface driver". Refer to the README file of each software package for the installation of such software.
    • Or Lenovo System Interface driver for portable computers ThinkPad-no
      For portable computers ThinkPad Lenovo System Interface driver
      It is necessary to install "Lenovo System Interface Driver" for using Windows Vista.
    • Display driver
      It is necessary to install a display driver appropriate for the target system that is provided by Lenovo. Director of presentation does not work with any display of Inbox driver in the OS.
  • Activate the Fn + F7 key on the screen, to also install the following packages:
    • Power management driver for Windows Vista, XP, 2000, Me, 98 SE.
    • Hotkey driver for non-ThinkPad notebooks or
      For ThinkPad Hotkey features integration
      (Note) If Hotkey features version 2.20 or later is installed on your system, install Presentation Director 4.04 or later version.

• Impossible to pass to Windows Pro of Premimum

  I bought Windows 7 Pro upgrade and cannot be upgraded. No restore points. Tried to start VSS and its dependencies and all the other stuff that I known. Am very PC savvy, and it's frustrating. I paid all that money for the upgrade and am tired of this. I'm running the 64-bit version. Moving from the premium to use the Group Policy Editor and others... In addition, cannot repair my Microsoft Home and business either... Constant error messages... I paid too much $ does not to be able to use this software. Bought for a reason... I need your help soon... email: * address email is removed from the privacy *, LeRoy W. Lee 910 - 285 - 4475

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Express upgrade failure

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Help! VMware-pass

  I'm having a problem process vmware - spend on one of my esx servers.  I've attached a screenshot of the top and the paper pass.  I have tryied restarting the mgmt-vmware, I've disabled HA and DRS and restarted the VC server.  I think it has something to do with the Update Manager, because when I restart my server VC Update Manager "reconfigure" all boxes on the esx server over and over again.  I tried to disable the Update Manager and I still all processes.   I can't restart the server because there is production on that vm and I can't vmotion vm out of the box, everytime I try it crashes and expires.  Any help would be greatly welcome.

  -David

  You can try this.

  Delete the VC server host.

  Stop and start the mgmt-vmware. Do you see multiples?

  If no add to VC (If Yes, I guess you have to anyway).

  These actions should also not affect running virtual machines.