My image files system went

Similar Questions

• Loading image file system

  Hello

  I want to load the special position of my file system image but image is not loaded and I am not able to see the image on siumulator.

  Here is my code for the same thing.

  Image image = Image (QUrl("D:\Megha\linux.png"));)

  ImageView * ImageView = pMyImageView:: create();
  pMyImageView-> setImage (image);

  Page * new = Page() page;
  Page-> setContent (pMyImageView);

  Application::setScene (page);

  But no image is copied

  You hardcoded the path to D: likely this file is not in this location on the Simulator or device.

  See the documentation in https://developer.blackberry.com/cascades/reference/bb__cascades__image.html for this relative setting or using your assets.

  Image inherits from resource, so isNull().  IsValid() and isEmpty() QUrl a.

  You need to add defensive code.

  Stuart

• Images of Smartphones blackBerry will not appear on the BB + file system error

  So, I have two problems:

  (1) I went in my 'images' on my Blackberry and there is no picture pictures says * no. *, but when I plugged my BB to my PC and clicked on the pictures folder, I can see all my photos. How is it?

  (2) I can't save a photo on my BB. When I choose 'Save', nothing happens, keeps saying "File system error", sometimes it is said that there is already a file with the same name and when I try to change and choose Save nothing happens.

  Another problem, I just discovered: when I take a picture, I can't delete it later, I get "picture cannot be deleted.

  * I don't have a MicroSD card in my BB.

  Hi and welcome to the Forums!

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• Startup/recovery disks and file system Image.

  I know that DO START/RECOVERY disk can be made only once. But not preventing the system from IMAGE files, or would it be the RESTORATION of the file SYSTEM.

  How is my setup.

  The original 1 TB HARD drive came with the PC will be the OS (INSTALLED at the factory) and RECOVERY. And this will be the storage. I'll install a 120 GB SSD to be used as C drive. I'll install the OS from the BOOT/RECOVERY disk on drive C for two reasons. To ensure that it is a CLEAN INSTALLATION and ensure that it is NOT of QUESTIONS if they work or not. Then they will be stored in a place course.

  Then I would be able to do a SYSTEM RESTORE/RECOVERY file. And no longer on the internal memory or external storage.

  Anyone with knowledge of this and a better solution I don't know.

  Disc SSD 120 GB OS 'C '. 1 TB of disk storage HARD drive "D", (OS and RECOVERY will always be INSTALLED)

  The question "what is prevented from make the SYSTEM IMAGE files" - image files may consist of training, but with different software.  Several solutions for this by choosing software that makes the image IE files: Norton Ghost, Acronis, Paragon, etc..

  System Restore is a feature of Windows and does not make use of the same action, but it is useful in the return of the system to an earlier date.

• I'm looking for an image compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Original title: Windows Server

  I don't know where to put this question, so here goes I am looking for a picture compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Listen to the actual system image file name?

  All,

  When you try to view the file system image on a WAAS unit by entering the command "Show flash" or "dir" I see a list of files, but none of them seems to be the image of the system.  My goal is to see the name of the real image of the entire system file to determine if she is 'Accelerator' or 'universal' as part of the file name, IE. similar to a router or switch.  Is this possible with a WAAS unit?

  albwaas01 #sh flash

  WAAS (disk-based code) software version: WAAS - 4.4.5 - b5

  The system image on flash:

  Version: 4.4.5.b5

  Directory of flash system:

  The system image: 200 sectors

  Reserved for the bootloader image rescue and other areas: 31 sectors

  a total of 256 sectors, 25 free.

  albwaas01 #dir

  time of last change of name size

  --------------  -------------------------          -----------

  125052 Thu Jan 30 11:08 2014 UcliEvt.bak

  120752 Mon Feb 3 2014 UcliEvt.log 15:43

  4096 Wed Oct 31 14:19:18 2012

  actona

  4096 Wed Mar 6 12:27:26 2013

  cliTemp

  4096 Wed Oct 31 14:14:24 2012

  core_dir

  4096 Wed Oct 31 14:15:42 2012

  crash

  4096 Fri Jan 17 16:49:25 2014

  downgrade

  Mon 3 4096 Feb 15:31:49 2014

  errorlog

  4096 Fri dec 13 16:24:13 2013

  newspapers

  16384 Wed Oct 31 14:14:11 2012

  lost + found

  4096 Wed Oct 31 14:14:21 2012

  pki

  4096 Mon Feb 3 00:02:00 2014

  its

  8192 MON 3 Feb 15:45:53 2014

  service_logs

  4096 Wed Oct 31 14:19:18 2012

  reel

  93855 Wed Oct 31 14:35:06 2012 syslog.txt

  Mon Mar 4 64 12:06:13 2013 sysreport.sh.log

  4096 Wed Oct 31 14:14:19 2012

  var

  508 Wed Oct 31 14:14:21 2012

  Hi Adil,

  You can see the type in the show version and see the running configuration.

  Cisco Wide Area Application Services (WAAS) software

  Copyright (c) 1999-2013 by Cisco Systems, Inc.

  Version of the software Cisco Wide Area Application Services (universal-k9) 5.1.1c (build b3 9 may 2013)

  Version: oe694 - 5.1.1c.3

  And

  -performing configuration-

  ! WAAS-universal-k9 version 5.1.1c (build b3 9 may 2013)
  !
  camera mode-accelerator applications

  Cisco Wide Area Application Services (WAAS) software

  Either way, universal image runs on all while that if you run Accelerator is not CM WAE WAE universal while is possible CM as an accelerator.

  Kind regards

  Kanwal

• I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system

  original title: Disk Image file

  While there, I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system. Pls help me remove :)

  I discovered what the problem was... :)

• ESXi6: error of storage when starting a Windows 7 image / deltadisks full file system

  Hi all

  I use an ESXi 6.0 with the latest patch on a HP ProLiant Microserver. Everything works perfectly except one Image of Windows 7 I have migrated from Microsoft Hyper-V.

  
  I had first consolidated the files on the disc in a single Image complete and then converted into a hard using WinImage.

  Now when I start the Image, Windows 7 does not start (starting Windows...) but then I get the error:

  
  Message der virtuellen Maschine

  Procedure der für die Datei ' / vmfs/devices/deltadisks/4 c 5... W7EN - s001.vmdk' fehgeschlagen ist (14 (wrong address)). DAS Dateisystem, dem sich die Fliegengitter ' / vmfs/devices/deltadisks/4 c 5... W7EN - s001.vmdk' is, ist voll. Wahlen Sie 'button.retry', um den procedure

  zu repeat. Wahlen Sie "button.abort", um die Sitzung zu

  The mentioned file exists, and the file system is obviously not complete. The error indicates filesystem, VMFS/devices/deltadisks/was full, but there are > 600 GB free.

  Any ideas what is happening here? What are these deltadisks?

  Please attach the file "W7EN.vmdk" - which contains the format of the virtual disk - to a response message.

  I think that we must do, is to use VMware Converter to convert the previously (with Winimage) converted to disk to ESXi like target. This will convert the spars (... s001.vmdk) disc format to support. If you have only the hard files, you can temporarily create a VMware Workstation (or reader) VM with the converted virtual disk attached and use it as a source for the converter.

  André

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Image generator - with file system?

  Is there a way to package files system turns into a built ISO with the manufacturer of Image ESXi?

  Thanks in advance.

  As far as I know, you need to create a new VIB containing the customizations you want.

  You can do this with the Author VIB fling.

  There is a great post of lamw (who else) on this subject, see Creating Custom VIBs for ESXi 5.0 and 5.1 with VIB author Fling

• Image: poster of local disk, download server and display the server file system

  Hello

  I use jdev 11.1.2.4.0...

  The requirement is that users want to upload images to their local drive for the drive on the server and they would like display of server disk images later.

  We do not want to save the images in the database. I'm not sure what should be the solution; However, I intend to...

  1 create a table to keep information from images - image_id, image_location (server drive), image_filename

  2. create a page where users can enter image information and specific file on a local disk name (I think I'll use inputFile component) and provide the Preview button to display an image on the screen before saving. To record data is to save the information in the database and copy an image file on the disk on server (the location for image files is predefined.)

  3. create another page where users can browse the database information and display an image for a selected record getting from the server.

  I need suggestions on...

  1. how to display an image on the page of the local drive?

  2. how to copy a file on a local disk to a server?

  3. how to display an image on the page of the drive on the server?

  Thank you.

  NAT

  See:

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-1/

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/

  http://tompeez.WordPress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-3/

  When Timo records the images in the database, you save it in the file system (examples on how to do this Java are available much if you just Google for it). Similar to Timo you then use the tag image to display pictures. The difference is that you can directly add the URL of the database table.

  The advantage of using a database to host images, it's that you're not although dependent on files server structures

  Frank

• Store images, css and javascript on a file system or database?

  Hi all
  
  I use 11g R2 and Apex 4.1.1
  
  By doing a search around, I found all sorts of ways to access the global files in your environment to the apex. I found 3 scenarios.
  
  (1) place your files in the workspace (database) and access it via #WORKSPACE_IMAGES #.
  (2) place your files in the directories is (void)
  (3) use a separate http server to access your file system
  
  
  For the first solution, this comes with a problem: when you have several css and jquery ui theme ties css to a subdirectory "images". I can't seem to make the subdirectories under #WORKSPACE_IMAGES #. For example: #WORKSPACE_IMAGES #/ images
  
  The second solution requires dba SYSTEM connect and store files on the system. This is not very practical when you are developing.
  
  The third solution seems to be the most used one (when I googled around), but our administrators do not want to set up a separate web server for this project. I have to work with what I have which is the APEX server and the database.
  
  
  Now, I have a question:
  
  Is it possible to let another user that the SYSTEM to connect to the East, but only to a subdirectory on is (that is, / i/themes/workspaceName) so the developer can not mess with files from base to apex or the themes themselves?
  
  Otherwise, I have to download every css and images one by one to the workspace and change all paths relative used in css, which is a pain...
  
  By using this option, all my files are stored in the database, which is considered safer than when they are on a directory on the server itself.
  
  Thanks in advance,
  Dennis

  Hi Dennis,

  You DBA should be able to do the following.

  (1) create a new subdirectory in the directory images on XDB (it can use WebDAV or FTP to do)
  (2) create a new database for you user (see http://www.oracle-base.com/articles/9i/xmldb-9i.php) or grant an existing user

  GRANT connect, resource, xdbadmin TO ...;
  

  (3) you can use WebDAV or FTP to transfer files to this new directory of void and do not have to use the SYSTEM

  It would be possible to avoid the xdbadmin role and use the ACLs on directories, but I am not sure XDB. But I don't know that your DBA should be able to understand this.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Unable to create the new folder. File system 512 error.

  Hello

  I was not able to create new folders in my pictures public library recently. Whenever I do, I get a message from file system error 512.

  A forum sponsor said that Windows 7 had a limit of cable of 50 folders under the images. Even though I've had 61 cases, which kind of contradict that response, I went before and tidy up until now I have only 39 files directly under the images. However, the problem persists.

  Just for the record, I also did a registry cleaning, obviously have restarted, etc.

  Any ideas out there would be more appreciated.

  Hello

  Did you changes to the computer before you encountered the problem?

  Check if you are able to create a new folder in the library of images in safe mode. To start in safe mode follow the link given below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help (LR3)! Catalog of all the missing image files

  LR3 (using Windows 7):

  All of a sudden none of my image files are linked to the catalog; + 14 000 of them. The catalog is on an external, backup hard drive on my internal hard drive. The catalog seems intact. The most recent image files are on my internal hard drive, but most are on an external hard drive. All drives are connected and I can navigate to any file I want. But the catalog cannot find files, even if nothing has been moved. When I click on 'find missing files', 14 000 + question rated Previews appear. None are related to image files.

  In addition, when I have to 'find' a group of lack of files on the drive, through the library module, then all of a sudden these images disappear from the preview and the number of images in the catalog (the number in brackets) is diminished by this number. I am at a total loss.

  Background: I had not used LR for a few days. I recently installed Google Earth and apparently with her a number other applications that I didn't. So I went to my tools for the administrator and "restored" my system to a previous state, just three days ago. I "restored" before with no ill effects. It was after that when I open LR, disconnection of catalog/image was obvious. I don't know if you disconnect that existed before my 'restore' or whether it might have been triggered by it.

  Any ideas?

  It turns out that - somehow - the letter assigned to the external hard drive has changed. Once I have it changed back (as an administrator), all was good with the new world. (Just need to do a little extra cleaning.)

  Aside: How on earth does something like that happen, that a drive can pass letters?

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...