ESXi6: error of storage when starting a Windows 7 image / deltadisks full file system

Similar Questions

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error of 0x8007042c, cannot start the Windows Firewall

  Original title: error 0x8007042c, you cannot start the Windows Firewall

  Help

  I can't have the windows firewall to install and run...

  I have a picture of a mistake, but I don't know how to post the photo of the error here.

  Firewall Windows cannot change some of your settings
  Error code;   0x8007042C

  Concerning

  Bill

  E-mail address is removed from the privacy *.

  Old man again on XP PRO

  Hi Dan,.
   
  You might have a corrupted user profile, I'd like you to create a new user account and test the question.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• Help please: error 0x0000007e Stop when starting up on top of Satellite P30 110

  Hello

  I wonder if someone can please help me with a recurring error message I get randomly when starting up. I have a satellite P30-110, with WXP Home SP2 installed. Mobile P4 3.2Ghz processor, 512 RAM, ATI mobility Radeon 9600/9700 series.

  Turns off the computer as usual last night. He walks this morning and think that it load the bios OK and then got the black background with Win XP, and then think about this error page came. Has a blue background with the following text:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X00000000, 0XF891D384, 0XF891D080).

  I turned the computer off, then restarted when prompted chose to start windows normally, and it seems to start up fine.

  Any ideas?
  Thanks for your help.

  Hello

  If this is the first time, you've seen this error, I'm not too concerned about it. There are not too many people who have not encountered this scenario occasionally.

  The time to worry, if it happens regularly, as this may indicate a component defective that will need to be diagnosed later.

  On this occasion, I suspect that the start process has detected an anomaly any (possibly a play on hard drive control) and rather than allow Windows to continue it stopped with the error on blue screen.

  Kind regards

• Sound of siren when starting computer (Windows 7) E-Machine

  I was wondering what could be the cause this Mermaid - like the high-pitched noise when starting my computer.  It doesn't go away, but I wonder why this is happening.  I was reading about the fans, etc., and the CPU usage but I'm not sure how to check for these things.

  I would be grateful if someone could answer this question.  Thank you.

  Angela

  Perhaps in connection with a system fan doesn't start is not at the start, no such error / sound is triggered in the bios of the system, before the start of victory

  This problem occurred after that you run a windows update, or installed / ran a maintenance utility?

  Is this a desktop or laptop computer and model number?

• How to fix error 0x8007000E DX when start webcam on Skype

  When starting a webcam Skype call or check the video settings in tools/options in Skype, the DX error 0x8007000E error message appears and prevents normal video on Skype, even if sound/audio function still seems to work ok.

  Previously, had no problems, but this started after using a cell phone program Skype on another remote computer sometime before from Skype on my desktop home normal when the error appeared. The portable Skype program worked well both on another remote computer

  The webcam is built into my ASUS VK222H LCD monitor after trying to install a driver updated for the webcam, a different error message in the BACK said that this cannot be done and now the webvam does not at all.

  I am pleased to inform you that this problem seems to be fixed.

  I followed the advice of the ASUS support forum and just reinstalled the webcam USB then restarted and both Skype and webcam now seem to work normally.

• Error number: 0x8024D001 when you run windows update

  Here's my situation, I wiped recently my installation of Win XP Pro x 86 original seven ' 07, now running in the title error when you run windows update after reinstalling.

  A little of what I've done already;

  • http://support.Microsoft.com/kb/2497281/en-us
  • I went through the steps to download and win xp sp3 app, have always error WU (will abreviate Windows Update this for now).
  • To run Microsoft fix it found 50777 persists.
  • Has been through the steps in the method 1: save the Windows Update files. Problem persists
  • Spent by method 2: replace the folder C:\Windows\SoftwareDistribution Windows Update. Problem persists.

  Next

  • Check which version of the .net framework is installed. Found v2.0.50727 (I was referring to this page http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-xp-update-error-number-0x8024d001/d3f8b64e-0532-40ec-beb4-0bea856d1ef3 )
  • When running .net Framework 2 sp 2 (downloaded from http://www.microsoft.com/en-us/download/confirmation.aspx?id=1639 ) I receive an update confirming that it is already installed.

  Other

  • Set the firewall disabled (I know it is not recommended, but until it's resolved I leave it)
  • Internet Security in IE8 is set to medium
  • IE v8.0.6
  • IE 8 privacy set to low temperature

  Help please? :(

  First, download the .NET Framework here repair tool:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=30135

  If this doesn't fix the problem. try to run .NET Fixit recording:
  http://support.Microsoft.com/kb/976982/en-GB

  Or the other of these two should solve the problem for you, but in the case where it is not, then here are some alternatives:

  • http://support.Microsoft.com/mats/windows_update/
  • http://support.Microsoft.com/kb/822798/en-GB

• Error 0x8024402F message when upgrading from Windows

  I have an 0x802440F error message and I can't get help for this problem.  I tried to get updates, but this always error message keeps coming up and no updates are displayed by download. Can you please indicate

  0X8024402F

  Treatment of the external WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS file completed with errors.

  It is a Windows Update error, which indicates some sort of connectivity problem.

  See - you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  `~`

  Also, try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  As downloads fail, when run you the fix it choose its mode by default when you run the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 12:53 Friday 9 December 2011

• How to fix error code 8024402F when upgrading from windows

  When I update my windows vista, an error occurs saying code 8024402F Windows Update encountered an unknown error.

  Could someone please tell me what is the problem and please tell me the steps of how to fix this.
  If it has to do with a router, please tell me how to solve this problem with the router.

  Thank you

  1 see: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/8024402f-error-keeps-occuring-when-searching-for/ebb9fc06-685a-4cb3-a8b3-d45c6e6afe62

  2. Windows Update, error 80244016, 8024402f or c80003fa
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa

• error code 57 when executing that Windows update

  I get the error code 57 and the 8024200d error code when you try to run Windows update

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  If it's office updates maybe try to install office with the installation media updates in the installation drive.

• BlackBerry Smartphones got a virus on my Bold 9700 Windows, can't delete it, file system error 3

  I used the SD card in my BlackBerry as a way to print some documents. Of course, internet cafes are full of virus of children all this porn downloaded.

  Then, I got a file autorun.inf with all its contents. My problem now is that I can not remove the file from the main virus. Whenever I try to remove it, an error occurs.

  This is the file system error 3, from net.rim.device.api.io.file.FileIOException

  Can I do to remove this thing? I tried the native and Rock File Manager, FileScout Lite file manager, but nothing works

  Raestloz wrote:
  The problem is, it's a Windows virus. Connection to a PC could very well spell trouble. This is the reason why I try to remove the em with my BlackBerry.

  There is no setting in the BB OS change on a file write protection. Therefore, you cannot do it with the BB... If you are not ready to connect it to any PC (maybe even the Internet infected PC coffee it?), then format the card with the BB command is your next step. Maybe you can remove the BB and using a card reader on a PC instead of mass storage Mode?

  Raestloz wrote:

  In any case, can someone tell me what exactly the error means? It seems pretty obvious with FileScout Lite error message, but it would be nice if I can get a confirmation

  The error is indeed explicit... somehow, this received file write protection on it the BB OS recognizes exactly as he said. How it happened? It would be a totally different matter of course... as well, since everyone here is volunteer 'out there', the other user nothing here you receive can be considered as authoritative beyond your level of confidence what information you receive.

  • KB23398 How to remove files from a BlackBerry smartphone

  Good luck!

• When you use Windows Explorer to view the files and folders, the thumbnails of image files appear briefly then are replaced with the default icon of the image file. I tried the answers to similar problems, but none worked.

  Browse the folders with image files, I cannot see the thumbnail icons for images correctly.  I know, it should be possible, but I can't do it.

  When I first open a folder in Explorer, I see the correct images for a fraction of a second, then all images are replaced by the thumbnail of the image file (which looks like part of a digital SLR).
  I put all folders to display picture to display the preview and the filter, and the "always show icons never thumbnails" is not checked.  Display file icon "on the photos' is unchecked (I tried checking, too, without change).  I also deleted the thumbnails using disk cleanup as suggested on another question, but which did not allow them.
  The result is that, if I want to open an image for editing or downloading, I have to use a third-party application (for example, Pentax Photo Browser) to preview images, and then return to the Explorer window to select the correct file by name. Don't try to difficulty of these things that are not broken.

  izzlecrate,
  You might want to try it and I just did this procedure myself a moment ago and surprising, it worked!  First of all I must tell you that I have Windows Vista, but the information I got was for Windows 7 and it worked.

  First: You must create a NEW FOLDER and put it on your desktop.
  Second: Move or copy the contents of the original file in the NEW FOLDER on the desktop. I copied the content, just in case something went wrong.
  Third: After that is finished and all the contents are inside you.
  Fourth: On the desktop right click on the folder and click Properties at the bottom of the box.
  Fifth: Click Customize tab at the top and then the Middle click on DEFAULT settings for the folder.  Click on apply to, click OK and your done

  NOW! You can move the folder wherever you want by drag-and - drop the folder and when it's done and that's the best part, you should see the thumbnails of the folder on the EDGE of the folder that you just created.  It worked for me and I hope it works for you.
  I have 10 years of experience with my computer and have troubleshooted my friends for viruses and other computer problems successfully.  I'm advanced computer user.

  That this is done, it restores the folder its original settings.  Good luck! Rick

• FPGA - Successful Compilation but error 89: full file system

  Hello friends,

  at the end of my last compilation of the server compile reported an 89 error: complete file system. Anyone know what is the file system?

  Maybe the Flash to the bitfiles? But this will be erased automatically with each new download bitfile.

  Note that the compilation was successful and only 89% of the slices when used. Therefore, it remains the space available (FFs and LUTs).

  Finally are there limitations on the use of IO-nodes or FIFO?

  Material: cRIO 9002 with 9101 FPGA Chassis.

  Thank you for helping.

  Marco

  Hard drive was out of free space. After the liberation on 100Mbytes, there was enough space to compile successfully.

  Thank you

  Marco