My Inspiron Mini suddenly will not connect wirelessy. Other computers in the House, always connect instantly. ??

Similar Questions

• If I downloaded the program from the site but do not run or install ammyy, is my computer safe? Are my other computers in the House at risk if they were not present?

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I don't know which is the site of ammyy, and I don't know what you have downloaded. If you just downloaded a file and tried not to install or run, there are no danger to him, niether to your computer or any other. If you think it's dangerous, just delete it.

• HP OfficeJet8600 suddenly will not connect wireless to my MacBook

  I bought a HP OfficeJet8600 six months. Connect with the MacBook. Works very well.

  Today, it stopped.  Printer works. Does not connect to the Macbook.

  Makes all bases, reboot etc. No luck.

  Help!

  Hi alissas,.

  Thank you for your answer!

  I recommend the following:

  1. Uninstall the software. Uninstalling the printer software.
  2. Re-install the software from the website online. HP Officejet Pro 8600 series full feature software and driver-OS X 10.9 Mavericks.
  3. Take a look at this post, incoming and outgoing Printer Ports, to ensure that the router is not blocking ports. (If you don't know how to determine this, you need to contact your router company).

  Hope this information helps, and have a wonderful day!

• Why used my windows to connect to the internet so that linux and the other computers in the House will be

  I have windows Vista Home Basic

  Two possibilities:

  • Drivers
  • Installation is corrupt

  Try this:
  Verify the integrity of Windows Vista system files

  Then open a command prompt (run as administrator - the selection, not the fact that you are connected as a supposed administrator) and run the following commands ONE at a time, pressing ENTER after each one.

  netsh winsock reset catalog
  ipconfig / renew
  ipconfig/flushdns
  ARP d *.
  nbtstat - RR

  Turn it back on.

  What is the brand and model of the network device?

• Published the network Variables not accessible by other computers on the network

  I am trying to create a system where a computer will display network variables that can see any computer on the network, this includes a person bringing in a laptop computer and the connection for a short period.  So I was looking through a large number of forums to find an answer and tried many solutions and nothing has worked.

  This is where I am.  On a single computer if I update a variable network it appears on the DSM NOR (Distributed System Manager) under which the name of the computer and I use this variable and it is updated.  Any other computer connected to the network also appears on the DSM.  On the other computer, he sees the first computer in the DSM, but cannot see any one of the variables.  I also register the IP address of the computer, but it does not help.  If anyone has had this problem and know how to fix?  I had the same problem using my code for the project and the example code in the shared Variable Comms between Executables.Ivproj.

  Thank you for your time

  Mitchell

  I had some problems lately with the network stream. I know that this isn't nearly the same as shared variables, but it uses the same underlying process in windows. In my case, it's the windows firewall in Windows 7 that has the problem.

  This link help me configure my firewall correctly:

  http://digital.NI.com/public.nsf/allkb/0D7B86F4B4D19A5E86256F9A006EECB1

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• MacBook Pro will not connect to HP OFFICEJET 7500 a

  My MacBook Pro will be not not to connect wirelessly to my HP officejet printer. It worked perfectly for the last 12 months, but suddenly will not connect unless I use the lead. I tried to reinstall using the HP disk but get an error message saying that the installer is not compatible with the operating system. It's weird, because it's the method I used before and I am aware that the operating system is unchanged.  Can you help with this problem?

  Thanks for providing this information Muir1.

  Follow the steps in this document to do a complete uninstall of the printer software.

  Uninstalling the printer software.

  Then download and run the latest drivers for the 7500 a Officejet.

  HP Officejet full feature software and drivers - v10.8 of Mac OS X.

  Let me know how make you out.

  Thank you.

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• IPad Mini will not connect to WiFi

  My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?

  I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions