My Ipad mini will not connect with my wifi at home. Other devices are able to connect with wifi. I repeatedly entered the wifi password, but this is not ACCEP it. Worked very well. I turned the mini ipad market and nothing. Help!
My Ipad mini will not connect with my wifi at home. Other devices are connecting with the wifi at home. I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password. Help! It was working fine earlier in the day.
What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
Tags: iPad
Similar Questions
-
My HPPhotosmart C5580 all-in-One worked very well. Put in new cartridges and now she is not aligned. Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work. Help.
This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.
-
I just got this phone from a friend, and the only problem is that the camera won't take a picture, even if the video works fine. Any advice? Thank you!
You know what, guys, I just did a battery pull, and now it works fine. Sorry for the use of bandwidth. : I
-
I can't connect wirelessly to the Internet, while other devices are able?
I can't connect to the Internet with my laptop. This began a few days ago. But we can still connect to the Internet via a wireless router with other devices yet. Page says "Internet explorer cannot display the web page. When I click on diagnose connection problems, he said that it is my router or modem. But my other devices still work. I try the other suggestions but they just get into a circle with no result. Any suggestions? Ideas with my veryyyyyyy limited knowledge of computers.
I also had this problem, but my husband seems to have found the answer by searching other responses. The problem seems to be related to windows 8.1.
If you go to control panel, network and internet, then network and sharing Center, click on your WiFi connection, and then select the power management options, you may find that the option to "allow the computer to turn off this device to save power" is checked.
Uncheck this option seems to have solved my problem, because I had no problems since
-
Real-time application does not work; source code works very well
The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.
I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.
After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.
I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.
If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.
The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.
Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.
Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.
-
Portege M600 - ConfigFree does not work very well
Pls help friends...
I've used it before very well with ConfigFee.
Once I changed the profile, the LAN and wireless IP change correctly.
I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.I have LAN IP and wireless in this profile.
I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configurationThe following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.
I tried the solution proposed and even reboot my laptop, but there s no chance...
Can help you pls?First of all, you can use a single tool to configure WLan.
You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.Second, I put t understand why you use ConfigFree to Wlan configuration.
In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.In addition, I put t understand why you change the LAN and Wlan profiles?
In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.But like I said above; only one WLan configuration tool can be used!
-
VIsta - Local access only
HI -.
I recently moved. I use the same router from my old apartment and I had no problem connection in the past. Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.The router also works very well I'm able to connect with my iPhone and IPad without any problem.
But when I try to connect with my wireless laptop, it will only connect to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.
It's a Dell Studio 15 with Vista.
The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home. I tried to reset the modem and the router several times, but that did not help. I tried the option repair & diagnose several times but it doesn't work.
I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.
This has been very frustrating. Thanks in advance for any help or suggestion.
StaciHello Staciusa,
Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:
Take a look at step 6 in this article that give more details about it:
http://www.Microsoft.com/athome/Setup/wirelesstips.aspx
If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.
-
recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well
Hi mikedav,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.
Method 1:
Follow the instructions in the link below which will help you solve the problem.
Tips for solving problems with Internet Explorer
http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx
Method 2:
Follow the instructions in the link below to optimize Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Switch issues. Help, please.
How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.
-Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
-Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
-Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.Thanks in advance for any assistance that you can provide and Merry Christmas to you all.
It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router. In addition, what is the model of the switch?
To save the manual copy and the new hits of the ipconfig/all command output-
First connect through switch.
Open a command prompt window (start > run > cmd > OK)
Type the following lines in the black command prompt window and press ENTER after each lineecho "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line
echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
Notepad '% UserProfile%\Desktop\ipinfo.txt '.
outputCopy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.
You can delete ipinfo.txt on the desktop when you are finished.
-
iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.
Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.
Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.
It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.
Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.
I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.
Anyone alse experinceing this?
And tip on how to fix it?
I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.
-
The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube. This happens when I use Safari, Firefox and Chrome. Yet if I'm in Safe Boot mode it works fine. I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked. I'm not very computer savvy either so don't know much of what I do with this technical stuff. I emptied the caches, but that did not work. Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test. I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below. Help, please!
The system version: OS X 10.11.1 (B 15, 42)
Kernel version: Darwin 15.0.0
Boot Mode: Normal
Model: MacBookPro11, 1
FileVault: on
The System Diagnostics
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
Diagnosis of the user
2016-04-12 AssetCacheLocatorService crash
Accident of GarageBand 2016-04-12
Kernel messages
Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019
Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit
Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052
12 apr 17:20:51 0xe00002db questioned the file opening error
-the last message repeated 1 time.
Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066
Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit
Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476
Apr 12 21:54:58 opening error 0xe00002db questioned the file
-the last message repeated 3 times.
Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988
Hi AussieEgypt,
Thank you for using communities Support from Apple.
If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac. Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:
Test your login items
Choose the Apple menu > System Preferences, and then click users and groups.
Click on your account under the current user name, and then click connection points.
Make a list of the login items, you will need to remember later.
Select all the elements of connection, and then click the button Delete .
Choose the Apple menu > restart.
If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.
If the problem persists, follow the steps above to remove only the last element of connection that you added.
OS X El Capitan: If you think you have incompatible connection points
See you soon.
-
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: Internet wireless connection
I use a PC & a cable modem wireless to connect to the Internet. When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well. The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web. This could be a looming problem with the modem, or is it something else? Should I consider it as my modem is still under warranty? ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.
Thank you
[Transferred from Internet Explorer]
Roll up your sleeves & cross your fingers...
ACTIONS:
[You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]
1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.
3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.
4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]
Note: Good for IE9, too.
4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.
4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.
5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]
6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings
Note => for best results, check the option Remove personal settings .
7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].
8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]
9 restart once again & test.
10. in response to this post with a status report.
==================================================
[1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en[2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.
[3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
-
Something happened that broke my remote desktop connection.
System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)
For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.
The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.
That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system. Help, please!
Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.
-
GasBuddy web site not working properly with firefox, but works very well with Explorer
I noticed when I load the site gasbuddy.comweb, it does not work properly. It does not load, simply do not perform as it should. When I try to use gasbuddy.com to explore 9, it works very well. I already tried to work in safe mode and it does not solve the problem with gasbudy.com. Any suggestions on how to solve the problem? I made a discovery, and I'm very careful about deleting my cookies. It seems that when I do the procedure, I'm losing too much info on some web sites - weather.comweatherunderground, etc.. Just do not know how to delete cookies for a problem with the cause of other problems? Thank you.
Could check you your zoom here:
ALT + v (open the menu Classic view) > Zoom > Zoom text only
If I have this on (checked) then the middle column moves to the right and superimposed on the right column. If I have that turned off, then the page zoom correctly.
Maybe you are looking for
-
Can someone help me please. I have problems with an application. It was dark as it is updated and he said pending, but according to updates in the App Store it has been updated. I'm trying to remove it so I can reinstall it but nothing happens. I hop
-
Recovery of a Satellite Pro L450D-11V
I had the machine a few years and its going a bit slow and there was a warning about some audio software crush when I started is lately. I ran the backup process, and all my information has been backed up on another partition. I then booted the compu
-
Mixture of resolutions using iCloud
SO, I signed to iCloud for Photos and have uploaded my 22 000 photographs. ON most of my devices, I chose versions low-resolution to store on them. I want to be able to do is to have some photographs on my devices at full resolution, maybe some album
-
print head problem Officejet 8500 has
Hello I just replaced all my ink cartridges, and still it tells me that there is a printhead problem; the message says to replace the printhead to resume printing. Didn't I do it when I changed the ink cartridges? Visual instructions on the printer
-
HP 8600 - options control panel?
My Control Panel is empty - and I talked with people in warranty but my printer reburb happened yet... However - Is it possible my computer to 'copy '... There are options to scan, fax, print - but I can't find a way to copy. The second question I h