My installation of windows 8 has failed and takes memory.

Similar Questions

• Installation of Windows 7 has failed due to the graphics card, can not go beyond "Complete Installation".

  Hello, I'm trying to reinstall Windows 7 Professional 64 - bit after an accident which is more allow me to start on the login screen of my previous installation of Windows 7 Professional 64 - bit.  When I try to reinstall the installation hangs and will not finish (even at night) on the stage of "Complete Installation"... ».  During my first install of Windows 7 on this computer I had the same problem and finally worked my way around it by removing the 2 GB of RAM (2 GB installed leaving) and the replacement of my gpu NVIDIA 8800GT with a gpu NVIDIA 8600.  I don't have the right to replace the gpu, and I believe that this issue could possibly be resolved by installing a suitable driver for the 8800GT before starting the installation.  Since I can't start is no longer in Windows 7 in a form in any way, the only option I know is to use the option to load drivers in the system found on the DVD itself System Recovery Options.  When I find the correct driver and install it, it returns the error "failed to install".  I am now at a loss to know what to do because it was the only solution I could think, am I missing something?  If this is not the case, how can I get Windows 7 installed again?  Thanks for any help.

  Hi Limerick,

  Please see the artcle following with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Update to Windows 10 has failed and now PC will not work properly!

  Tried to update to 10 - failed - now being told invalid product key it is and have used it for 3 years!

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  or

  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Alternatively, you can try to fix the following:

  http://support.Microsoft.com/kb/2230957/

• WINDOWS POWERSHELL HAS FAILED

  I KEEP GETTING THESE MESSAGES POP UP SAYING WINDOWS POWERSHELL HAS FAILED AND WILL BE CLOSE THIS PROGRAM. WHAT IS MISSING AND HOW CAN I SOLVE THIS PROBLEM AND MAKE THESE POP-UPS STOP?

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  Hi John,.

  I'm unable to install the second copy LR6. I get the windows with the message that I've exceeded the number of licenses.

  I did the following:

  On the desktop computer:

  I registered

  Uninstalled LR

  Re-installed LR

  On laptop:

  I registered

  Uninstalled LR

  Re-installed LR

  What's wrong?

  Concerning

  Dieter Kolonko

  Von: John T Smith

  Gesendet: Mittwoch, 19. Juni 2015 21:02

  Year: Kolonko Dieter

  Vacancies: I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  created by John T Smith https://forums.adobe.com/people/JohnTSmith > in download, full installation, commissioning - see the discussion of https://forums.adobe.com/message/7667228#7667228>

• Windows 2003 R2 view security server of Service Tunnel has failed and is marked as critical

  Hello world

  After a few weeks the server does not start the service tunnel.

  the server workes normally after the first reboot. This server is located in the demilitarized zone.

  can anyone help

  THX

  Mike

  Event type: WARNING

  Event source: VMware View

  Event category: VMware View

  Event ID: 104

  Date: 01.02.2010

  Time: 21:52:31

  User: NT AUTHORITY\SYSTEM

  Computer: xxx

  Description:

  The 'tunnelService' service has failed and is marked as critical, closing

  Event type: error

  Event source: VMware View

  Event category: VMware View

  Event ID: 105

  Date: 01.02.2010

  Time: 21:52:31

  User: NT AUTHORITY\SYSTEM

  Computer: xxx

  Description:

  Not able to create the com.vmware.vdi.ice.server.JMXServer.main(SourceFile:211) MBean server

  javax.management.MBeanException: Exception thrown in the startServer operation

  at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:435)

  at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)

  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)

  at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)

  at com.vmware.vdi.ice.server.JMXServer.main(SourceFile:209)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:585)

  at net.propero.workspace.windowsinfrastructure.tunnelservice.TunnelService.run(SourceFile:34)

  at java.lang.Thread.run(Thread.java:595)

  Caused by: java.lang.Exception: ice start: address already in use: bind

  at com.vmware.vdi.ice.server.Ice.startServer(SourceFile:695)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:585)

  at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)

  ... more than 10

  It seems that you have another service running on port 443. (From your error message "Address already in use")

  Recently installed an IIS or something similar on the machine?

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• How to remove a windows update has failed? C-Media Electronics Incorporation-Sound-CMI8738/C3DX PCI Audio Device

  I can't install an audio controller because of a windows update has failed. How can I remove this update?

  Hi Rodney Hilzendeger,

  If you want to remove or hide Windows Update failure, then follow the steps below:

  a. go to the Windows Update Web site

  b. Select CUSTOM and scan

  c. right-click on the update that you want to hide

  d. click hide update

  You can also consult the following Knowledge Base article Microsoft for more information on troubleshooting didn't update problem:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• installation of Windows services has stopped working when you try to install the software

  Unable to install software.tried cmd method, nothing happens

  Original title: installation of windows services has stopped working

  Hello Mohit,

  Welcome to the Microsoft Community Forums.

  I understand that you have a problem with the Windows Installer service.

  But I would like to know some more information on this issue to help you better.

  (1) what is the full error message?

  (2) what software are you trying to install?

  (3) have you tried to install any other software?

  (4) when you say, "tried cmd method" what exactly mean you?

  In the meantime, please try to follow the following suggestions to solve the problem.

  Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

  How to fix problems with the Windows service install

  http://support.Microsoft.com/kb/2438651/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   

  I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

  Thank you.

• After Windows Update has failed I can print is no longer.

  original title: no printing

  I have a dell xps8100 windows 7 home premiun after a windows update has failed my printer stopped I tried a system restore, but he failed and he said try again

  my printer does not recognize my computer even for a test

  cgb321

  Try reinstalling the drivers for your printer. I had times when an update has done something that required that I have reinstall the drivers for a product. Don't know why, though. It's not really 'supposed', but he did.

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Windows Services has problems and get the error code 80246008 when I try to update windows

  I have 64 bit Vista Home Premium.  I have disabled UAC for short time (just to stop and restart).  Immediately, Windows Services has problems and my services files seem to suffer (fixit would not fixit).  He could have a latent virus that only suspended in no time I had disabled UAC?  I run the computer as an administrator, which I now realize is a problem.  I have a firewall and protection ESET and had all updates until two days ago, if that's any help.

  Also note: BITS of problems that seem to be linked to the system events to COM + service problem - she won't start - error 230: the pipe state is invalid.

  1. http://support.microsoft.com/kb/956706

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  2. http://support.microsoft.com/kb/910337
  If the fixit does not work in the article, read the article to other troubleshooting suggestions.

  PS - repair tool: http://www.microsoft.com/en-au/download/details.aspx?id=7997 (64-bit)

• Windows 10 Pro has failed and I restore my laptop OS (Widnows 7 pro) plant how can I upgrade again to Windows 10?

  Dear Ms team

  In October, I've upgraded to windows pro via Ms 10 and after that error during the download of updates in Nov 22, all possible windows for disk repair HARD is not too and on DVD for windows 10 cannot repair my Sony Vaio VPCF1.

  So now, even once, I want to upgrade to Windows 10 please advice how I can, also here the internet speed is low.

  Your more early comments very appreciated.

  You can download the. ISO for Windows 10 November update and upgrade the repair:

  How to download official Windows 10 ISO files

  then

  How to: upgrade an of repair using the file ISO for Windows 10

  also check:

  How to: 10 tips before installing Windows 10

• Windows Update has failed. Don't want to not brick it. Need help

  I just received my Revo RL80-UR23.  WIN8 booted up fine.  Went to get the usual windows updates.  All 102 of them (~ 1 GB).  Clicked on install.  During the installation of 99%, he failed and spent several hours back to before the updates.   For a while there I thought I was going to be stuck.  He would not return back and what I would do if the boot has been altered.

  Fortunately he finally did come back, but it made me think that better, I have a backup plan if this happens.  This documentation on Acer is thin.  Can anyone answer a few questions?

  • If the if the unit does not start what can I do?

  • With Windows 8, you may want to upgrade to Windows 8.1. The upgrade stream can be found here: http://us.acer.com/ac/en/US/content/update-to-windows81. This is the suggested method and wrote for all of our units, we tested and customers to my knowledge. I recommend this updates a few at a time and not all at once. It is recommended to install only the critical and recommended updates first.

    If you want to try another operating system, you must create your Windows 8 USB recovery media.

    You can access the UEFI/BIOS by pressing the delete key when you do a cold start. You can also access it from inside Windows by following these steps: http://acer.custhelp.com/app/answers/detail/a_id/27103.