My installed flash player is not recognized by the flash websites

Similar Questions

• MP3 player is not recognized by the computer, the unit will not charge and transfer of content said to connect the unit.

  Original tile: Mp3 player will not charge

  All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device.  It will not load and transfer of content said to connect the unit and it is already plugged.  The player will load on another computer.  The mouse that is connected works very well. Help!

  Hi LaurajmWR,

  Good to know that you are able to resolve the issue and thank you for sharing the information.

• MP3 player is not recognized by the computer.

  Original title: MP3 problem

  Whenever I connect my mp3 player to my laptop my computer does not recognize the device. It allows, but now he's not even appear on my media player either. Was there a change of setting or what continues? i; ve tried restoreing my computer, but who did not have any good either.

  Hello

  1. The question is limited to the MP3 player?
  2. What is the number and the model of the MP3 player?
  3. You receive an error message when you connect the MP3 player to the computer?
  4. Other devices not detected when connect you to the computer?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can run the fix provided in the link below and check if that helps resolve the issue.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Windows media player is not recognizing my mp3 creative zem m300 player

  Windows media player is not recognizing my zen m300 mp3 player creative I have two of these one with each firmware version. I uninstalled and reinstalled computer driver recognizes the drive as a separate disk drive will play even files but will not recognize the device if I can sync the music. clearly, it's a matter of media player I can see im not the first to have the problem and nobody has really found a solution. is it possible to go back to an older version of media player to make it work.

  To clarify, the device presents itself as a removable drive in the start menu > Compute, correct?
  If so, can you get the files back that way?

  Were you able to sync previously?

• Sansa e280 not recognized by the pc

  Hi all! I'm new here and I recently had a problem with my sansa 280. I know that for my sansa display in the pc I need to put it on the usb mtp mode. But when I put it on the pc, it does not recognize my computer and he says: "usb malfunctioned or not recognized by the pc. When my sandisk is out of the computer works perfectly. How can I get my computer to recognize the sandisk card? I want to put more music on this subject, and I can't! I use windows vista. Please help me, I would appreciate your help a lot!

  I had your exact the same problem. You can read in the thread I started. I pasted the answer that worked for me here.

  c1u31355

  Download Windows Media Player 10 or 11 from www.microsoft.com and reinstall it. This usually fixes things. Next step, but only if this does not work, is to get the "MTP Porting Kit" from Microsoft and install it.

  Let us know if those who help or not.

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• TV not recognized by the server-> 40L 73

  Hello

  My problem is already listed on this forum but I can't find a solution or explanation.

  I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

  Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

  When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
  But unfortunately he will not stay for the next time.

  Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

  Any suggestion? May be related to an IPv6 Internet connection?

  In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

  And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

  Thanks for your help and your comments in advance.

  Maybe you should just a few solutions of circumvention of the Commons:
  First, you must set the default TV.
  Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

  By the way: you should also check if your firmware is up to date. This can be checked here:
  http://www.Toshiba-OM.NET/firmware.php

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Lumia 710 Nokia is not recognized by the computer

  Lumia 710 Nokia is not recognized by the computer

  Hi sagarxx,

  Have you installed the Zune software?  Take a look on this link down:

  http://www.Nokia.com/us-en/support/product/lumia710/downloads/

  Keep in mind the following:

  Software Zune will not work on versions of Windows prior to Windows XP SP3. Download Windows XP SP3.

  I hope this helps!