Re: 610CT OS INSTALL---DOS/WIN3.11/95/98

Similar Questions

• Portege 610CT OS INSTALL---DOS/WIN3.11/95/98

  I try to install any operating system (DOS, or a Microsoft Windows operating system specifically) on a Toshiba Portege 610CT. The hard drive in the unit has been cleared, and the system boot with the message:

  "Insert system disk in drive.
  Press any key when ready... »

  No floppy drive or CD-ROM drive, I try to use a 2.5 "to 3.5" adapter player with my PC to install all the files necessary to boot the system.

  (a) can you tell me which files I need to have installed on the hard drive to have it boot properly?
  (b) may explain the installation procedure in brief?
  (c) could advise me an other resources regarding the 610 CT and fresh OS installs?

  Hello

  The fact is that you have 13 laptop and I am quite skeptical that someone will write here the whole story how to get this laptop for work. After reading your ad, I was a little concerned about this laptop and I found the info Portege 610CT shipped with Windows 95.

  I also checked the Toshiba support page and there you can find the drivers and utilities for this model of laptop. Anyway, if I remember well do like this:

  Move the hard drive in the laptop with a CD-ROM, but instead of install, just copy the CD of windows 95 disk hard (if there is a folder win95 on CD all you need).
  Then put back the hard drive in the laptop Portege, go to this directory and launch the installation.

• Install Windows XP from W7 return

  I installed W7, but many program a lot of program did not support with W7, I install DOS Windows XP always a mistake, please help me, thanks

  Honestly, I think I know your problem. You do not have a disk to install XP to the real address. You can be to loan/aid a recovery to reset setting disk factory for operating systems with pre-installed XP that you or someone else created with XP, you can't just install XP if it is not already installed.
  (Basically, you can only use a recovery disk if XP is already installed on your computer to reset your current installation of XP to factory settings).
  
  
  You get a real installation for XP disc. Not a recovery disk.
  I had the same problem once, except that I used a Windows 7 recovery disk.
  
  (PS: Windows 7 Windows XP Mode so you can run applications in an xp environment that will help the compatibility.     http://www.microsoft.com/windows/virtual-pc/download.aspx)

• CANNOT INSTALL WINDOWS XP ON A MACHINE WITH FREE BACK PRE-INSTALLED

  Hello

  I am also facing the same problem. I have a HP 550 laptop and it came with FREE pre-installed DOS. Its an INTEL Core 2 Duo with IGB RAM, 160 GB HD drive and also bought the machine 3 days back. I was tring to install WinXP on this Machine. But he won't go after the point where it says "STARTING WINDOWS" or something. At this point, it gives the blue screen and an error.

  No matter what reliable help would be appreciated and would be grateful if it is developed as I am a newbie.

  Kind regards

  BUDHUS

  The HP 550 is a portable class business and should have two options for installing XP.

  1. enter in the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.

  2. If you do not have the setting in the Bios, it's the driver sata for your machine:

  http://tinyurl.com/6bynhq

  Download and run, create a disk OR cancel disk creation. The files will be extracted to C:\Swsetup\sp37005 to use with Nlite.

  You can use Nlite to integrate the drivers in a new XP installation cd. NLite will still burn the new cd of XP.
  Very easy, really, just follow the guide below closely.

  http://maxeasyguide.blogspot.com/2008/04/preparations-for-WinXP-installation-CD.html

  Download nLite:

  http://www.nliteos.com

• Windows install gives error "installation package could not be opened. Contact vendor to verify this is a valid Windows Installer package. »

  window 7 was already installed on my lap top so no disk and windows install dose not work.when I try to install anything, it says this installation package cannot be opened. Contact the application vendor to verify that this is a valid windows installer package. Help, please

  Hello

  Here is a link where you can follow the steps
  http://support.Microsoft.com/kb/2642495
  Run the fix it, if it fails, do the manual way.
  Please make sure that you uninstall System Mechanic from your PC.
  I would like to know if it works for you.
  Kind regards
  Momo.

• ThinkPad 560 X - How the hell do you have the CD of external work?

  I just bought a 560 X used to use a development for Windows 98 computer.

  HARD drive was empty. I am looking for the external CD (P/N 1969-010) to work.

  I installed DOS 6.22 software then Cardsoft for DOS. When I inserted the IBM IDE PC card, the system emits a signal indicating that it has recognized that a card has been inserted, but nothing else happens.

  I have tracked down a lot of files to options/install/etc on the support site but have not yet tried all the.

  Will try to install Windows 3.1 and using some install files for Cardsoft for 3.1 but I guess just at present.

  I have the impression that there should be an installation file/program for the CD itself, but did not find one that looks right.

  I just want to get the CD to work so I can install Windows 98. Then I need to be able to use the CD with Windows 98.

  Any suggestions?

  Solved by myself - after a few permutations.

  (1) installed BACK 6.22

  2)
  Using another system, I find the driver on the Lenovo site,
  files for CardSoft for DOS (pctpcdos.exe) and IBM 20 X Max Portable
  P/N 1969010 (820xnosd.exe) CD-ROM drive

  These two files are self-extracting compressed files. Execution of creates them a diskette in A:

  (3) BACK started on the Thinkpad X 560

  (4) Insert the diskette for Cardsoft created by pctpcdos.exe software.

  5)
  Install.exe Ran from the diskette. This installs BACK support for the PCMCIA
  cards. In this case, we want to use the IBM IDE PC Card used for
  connect the CD to the 560 X.

  (6) switched disks, inserted the diskette created for CD 820xnosd.exe

  7)
  Passed to A: and run install.exe - important, for some reason any
  the installation program does not run correctly unless you switch to the A:
  drive. Using A:install does not work. You do A: the current
  drive.

  (8) the CD is now available at BACK

  (9) copied all the contents of a Windows 98 installation CD into a directory named WIN98CD hard disk

  10) ran Windows Setup from the hard drive.

  11)
  After the installation is complete and has detected all new
  material, I used the point to install new hardware from the control panel
  looking for a new material that was not installed.

  (12) the CD
  has been located. I put the Setup CD disk (created in step 2 of the)
  file 820xnosd.exe) and made the installation of the driver to the A: drive.
  Windows finds the correct driver and - hop, the CD player is now
  recognized and is usable from Windows 98.

  After getting the CD
  working, I used the other drivers that I found during my search of the
  Lenovo - things like audio and video - site and install them.

  Here
  is a complete list of the files that I downloaded from the Lenovo site. They
  include various support for BACK, Win3.1, Win95 and Win98

  Note-
  the date and time are the date and time when I downloaded the files to
  my system, not the date and time of the file on the Lenovo site.

  Short name          Size    Date            Long Name--------------------------------------------------------383956HW PDF        40,866  10-06-08  6:58p 383956hw.pdf560XHMM  PDF     1,032,670  10-06-08  7:08p 560xhmm.pdf56XUSE~1 PDF     1,593,876  10-06-08  7:09p 56xusergd.pdf820XNOSD EXE       236,610  10-08-08  3:33p 820xnosd.exe820XSND  EXE       858,933  10-08-08  3:49p 820xsnd.exe820XSND  TXT        54,402  10-08-08  3:29p 820xsnd.txtAFTPRW31 EXE       996,352  10-06-08  6:24p aftprw31.exeAFTPRW31 TXT         2,597  10-06-08  6:22p aftprw31.txtAFTPRW95 EXE       621,568  10-06-08  6:30p aftprw95.exeAFTPRW95 TXT         4,121  10-06-08  6:28p aftprw95.txtD3Q1CMST PDF     3,766,792  10-08-08  4:04p d3q1cmst.pdfIRTPRDWO EXE       240,313  10-06-08  6:32p irtprdwo.exeIRTPRDWO TXT        10,240  10-06-08  6:31p irtprdwo.txtKXP101WW TXT         6,239  10-08-08  2:55p kxp101ww.txtPCTPCDOS EXE       747,834  10-06-08  6:35p pctpcdos.exePCTPCDOS TXT         3,722  10-06-08  6:33p pctpcdos.txtPCTPCW31 EXE     1,099,606  10-08-08  2:10p pctpcw31.exePCTPCW31 TXT         3,754  10-08-08  2:07p pctpcw31.txtPCTPGW95 EXE       834,271  10-08-08  2:19p pctpgw95.exePCTPGW95 TXT        13,023  10-08-08  2:18p pctpgw95.txtPCTPIWDS EXE        57,339  10-08-08  2:56p pctpiwds.exeSG245294 PDF     4,079,144  10-08-08  4:21p sg245294.pdfSPSDI833 EXE       486,851  10-08-08  4:23p spsdi833.exeSPSDI833 TXT         8,205  10-08-08  4:21p spsdi833.txtTHS6017F PDF       111,734  10-06-08  7:01p ths6017f.pdfTPP95RLD EXE       839,220  10-06-08  6:50p tpp95rld.exeTPP95RLD TXT         1,891  10-06-08  6:44p tpp95rld.txtUTTP2W31 EXE     1,428,480  10-08-08  4:19p uttp2w31.exeUTTPFDOS EXE       349,563  10-06-08  6:36p uttpfdos.exeUTTPFDOS TXT         6,660  10-06-08  6:34p uttpfdos.txtUTTPFPER EXE       109,134  10-06-08  6:40p uttpfper.exeUTTPFPER TXT         2,704  10-06-08  6:38p uttpfper.txtUTTPFW31 TXT         7,772  10-08-08  4:06p uttpfw31.txtUTTPFW98 EXE     7,348,900  10-06-08  7:19p uttpfw98.exeUTTPFW98 TXT         8,799  10-06-08  6:36p uttpfw98.txtUTTPPERD EXE       129,634  10-06-08  6:41p uttpperd.exeUTTPPERD TXT         2,367  10-06-08  6:38p uttpperd.txtVFTPI89M EXE       429,377  10-06-08  6:55p vftpi89m.exeVFTPI89M TXT         7,678  10-06-08  6:49p vftpi89m.txtVFTPXW31 EXE       810,712  10-06-08  6:54p vftpxw31.exeVFTPXW31 TXT         2,484  10-06-08  6:44p vftpxw31.txtVOL4HMM  PDF     8,194,060  10-08-08  3:53p vol4hmm.pdfW95SFD56 EXE       262,355  10-06-08  6:58p w95sfd56.exeW95SFD56 TXT         6,078  10-06-08  6:55p w95sfd56.txt
  

• How do I reinstall Windows 7 on Toshiba L650 - 17 c?

  Hello
  I have Toshiba L650 - 17 c without recovery disk.
  Now, I want to install DOS Windows 7 on my Toshiba.

  Please let know me how I can do this.

  Is on my hard drive recovery files? Schould I use combinations special keybord for the installation?
  (right now I have 2 disk - C and D)

  And if I reinstall syatem can I somehow burn CDs with files recovery...

  Waiting for your response,
  Mark

  On the first try, please create recovery disk.
  For this Toshiba Recovery Media Creator pre-installed use.

  You can find it under Start menu > all programs > Toshiba.

  After doing this o try install OS using the install HDD recovery mode:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• INACCESSIBLE_BOOT_DEVICE on Windows 8 with Secure Boot (Alienware x 51 R2)

  Hello

  I have a desktop R2 of Alienware x 51 and when I first bought it came with Windows 8. Long story short, I decided to install Windows 7 instead and for that I had to disable the secure in the BIOS boot option. Now I decided to install DOS Windows 8 and it worked and everything, but when I turn it back on Secure Boot it gives me a blue screen with the message: inaccessible_boot_device.

  So I don't know what to do here. Basically, what I want is to have Windows 8 on my computer with secure startup, commissioning. I don't mind not duty re - install Windows 8 given that I didn't restore my backups but I always try to solve this problem. Any help would be greatly appreciated.

  Hello

  I re-formatted my computer last night and ended up resolving this issue so I thought I would update this matter with my solution.

  Basically, I followed this guide:

  www.eightforums.com/.../38486-need-help-formatted-genuine-Windows-8-Lenovo.html

  With the help of the media Windows Installation tool, I was able to install Windows 8.1 Secure Boot with UEFI active. Please note that I used a USB Flash drive and not a DVD, apparently, it makes the whole process better somehow.

  Thank you for your help and time of Milena and Naomi!

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• HP 7 G2 Dose does not install apps on SD card

  I recently that Got a HP HP TAB 7 G2 and it dose not allow me to install apps on SD card.

  I have read and found that Android 4.4.2 dose does not install apps on SD card on HP tabs.

  Y at - it another way I can do it, or I can hope an update or update Android 5.0 will allow me to do.

  I like to play games on the TAB and can install only 1 or 2 big games due to the lack of internal memory (4 GB).

  Any help would be greatly appreciated.

  Hey @ApoorvMishra ,

  Welcome to the HP Forums!

  I understand you are trying to install apps on your SD card instead of internal storage.

  Unfortunately, this is not a feature available on any Android device that does not have root access.

  There are methods available, but most require rooting the device, or by using the APKs HP could not support or encourage.

  Thank you.

• Windows 95 to Windows 7. Windows compatibility works do not to install from dos/Windows 95 version of Master of Orion 2. Is there another way?

  Hello

  I have a dos/Windows 95 master of Orion 2 and really desperate male relative.  Is it possible to install this game on a Windows 7 system?   He repeats to me that there is a mismatch due to 64-bit system.  I used the program in the control panel for trying to install programs designed for earlier versions of windows, but the compatibility program was not able to help me.  I also tried the right click on the Setup icon, select properties and change the compatibility of the system, but also the resolution here, but alas no luck.  Thank you!

  Hello EBahama.

  If its a DOS game I would suggest using DOSBox.  It's a bit complicated so I won't have a full run down here.  But assuming that this male relative has used BACK before he shouldn't have any problems.

  If it is a real 16-bit Windows application.  Then you could use a Virtual Machine, assuming that your CPU supports the required technology (many do not) and installs an earlier version of Windows on them.  Unless you use the professional version of Windows 7.  Then you can download 'XP Mode' which is a virtual machine that comes with a copy of Windows XP.

  A failure there is a Master of Orion 3 released a few years ago, I'm not on top of my head, if its compatible with Windows 7 64 bit.  But there are also the Sins of a Solar Empire, which is compatible, is a little different, because his real time, but his little near the same concept. :-) Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• install xp from dos

  Hello
  I have an office work with windows 7 and a laptop with no dvd player and no BONES. I am trying to install XP on laptop computer (does not support to boot from usb). I've done so far:
  -get out of laptop HARD drive
  -connected to my desktop (USB adapter)
  -formatted
  -created a 3 gig fat32 partition and receives the letter Z
  -define Hdd partition (Z) as active
  -copied folder I386 to the XP cd to drive hard partition (Z)
  -copied smartdrv.exe in hdd partition (Z)
  -unplugged the desktop hard drive and put in laptop
  -boot from a boot disk (floppy, created in windows 7, the MS-DOS startup disk)
  -run smartdvr
  -run winnt
  -Start treated began and the first part was made
  -floppy drive eject
  -Restart
  -changed to HARD disk first boot sequence

  Now, I get NTLDR missing. If I C: > dir I see

  I'm stuck here. What I am doing wrong?

  Thank you very much

  NTLDR missing: http://www.computerhope.com/issues/ch000465.htm

  J W Stuart: http://www.pagestart.com

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to install a Lightroom 6 from a cd in windows 7. But the installer say dose not fit for win vista. How I can install it?

  I try to install a Lightroom 6 from a cd in windows 7. But the installer say dose not fit for win vista. How I can install it?

  Copy the installation files to a desktop directory, right-click on the Setup > click on the compatibility mode > win 7.