My iPad stops during the night by himself after installing iOS 9.3.1

Similar Questions

• Date system resets to 2002 after a stop during the night

  I have a Dell Dimension 4550 with XP operating system purchased in 2002. Computer work fine except after having turned it off during the night resets date and time system in 2002. After resetting in the configuration screen, it will keep the date until I stop from one day to the next one up to 2002. The error message only in the file is The Core Services service AG could not start due to the following error. The system does not find the specified path, how can I fix this problem

  When the system date and time are incorrect, then is a good indication that the battery on the motherboard needs to be replaced.

  the battery from the motherboard is also known under the name of the cmos battery and the bios battery.

  There are instructions on the net how to replace.

  most of the time its pretty simple to replace and the battery can be purchased where they sell watch batteries.

  You can remove the battery and get the model number or search for it in the manual of your computer or your manual online computers at its place of origin.

• Service starts and then stops during the SRM 5.1.1 install

  
  My configuration is:

  • 5.1 ESXi
  • vCenter 5.1 has running on a virtual machine
  • Execution of SQL 2008R2 sparer vCenter VM
  • Separate the VM for the execution of SRM
  • Above config is replicated to the site of DR
  • vCentres are not in Linked mode
  • SSO separate databases for each site

  When I installed SRM, it was wrong at the end and then gave the service could start message.  Finally, after clicking try again several times, the installation is complete.  However, the SRM service has stopped.

  The service can be started, but it stops immediately without errors in the logs of Windows.  The only hint of information that may be useful is in the SRM Setup log:

  VMware: Srm::Installation:Utility:LaunchApplication: INFORMATION: executable completed. Result code = 1

  VMware: Srm::Installation:VMUnregisterSrmService: ERROR: LaunchApplication() failed. Executable = D:\Program Files\VMware\VMware vCenter Site Recovery Manager\bin\vmware-dr.exe, parameters = u 'D:\Program VMware vCenter Site Recovery Manager\config\vmware-dr.xml', Code = 1

  VMware: Srm::Installation:Utility:LaunchApplication: INFORMATION: launch executable. Command line = 'D:\Program VMware vCenter Site Recovery Manager\bin\vmware-dr.exe' - r 'D:\Program VMware vCenter Site Recovery Manager\config\vmware-dr.xml.

  VMware: Srm::Installation:Utility:LaunchApplication: INFORMATION: waiting for the child process to complete

  VMware: Srm::Installation: 'anonymous namespace': ReadFileCompleted: INFORMATION: asynchronous callback status: 109

  VMware: Srm::Installation: 'anonymous namespace': ReadFileCompleted: INFORMATION: asynchronous callback status: 109

  VMware: Srm::Installation:Utility:LaunchApplication: INFORMATION: child process stdout:

  I tried to get the result code = 1 but without success.  Certain sections of the KB speak the DSN system, but it is 32 bit and the connection test is successful.

  I have the same problem in both the DC SRM and DR DC SRM Production.

  Any ideas gratefully received!

  Hello

  You must create the 64-bit DSN for the SRM 5.1.

  Michael.

• HP Envy 15 t-j1000: HP Envy 15 t-j1000 Select Edition died during the night?

  I tried to start up my HP Envy 15t - j1000 select edition yesterday morning and I get no response what so ever. At first I thought I had left it on the exhaustion of the battery during the night. However, after a lot of troubleshooting (remove the battery and you try to start on the whole, hard reset, try another AC charger, removing RAM Modules and other components) I still can't you it to Sunrise power. The power led next door where my adapter plugs on it used to light either. It's as if the machine of the entry is completely dead, has no sense as long as its been runing perfectly without any problems.

  In addition, it has beats audio, but no button beats on the chassis (as far as I can tell) because I know it's a problem reported causing some laptops with her boot.

  Help, please!

  Hi @DrexLock,

  Thank you for your update.

  I understand you have changed the power button Board and the problem persists.

  The led indicates the power is getting to the laptop. After replacing the power button you know power going to the motherboard, but it seems to stop there.

  The next step would be to replace the motherboard.  Because they tend to be expensive, you can do a price comparison to see if the replacement of the motherboard, or the purchase of a new laptop is the best option for you.

  Good luck!

• Printer e-all-in-one printer 7520 printer turns off during the night

  My printer was initially set up to automatically print multiple daily crossword.  It has worked well for more than a month.  Now the printer stops during the night, and I have to unplug the device and plug it in again so he can print the puzzles.

  Hello DonIriving,

  Welcome to the HP Support forums.  I understand that your Photosmart 7520 stops during the night.

  I've included the document the printer turns off unexpectedly after being inactive for a period of timetroubleshooting.  It will guide you in how to correct this problem.

• How to stop the hibernation during the night?

  I have a HP Pavilion Slimline desktop computer model s5380i.  It goes into what I call a 'sleep' during the night, a result which my AutoSave does not work.  How to prevent from hibernation, or place it so the automatic backup will work.  The reader who wants to save is a Toshiba and I use the backup software provided with the drive.

  Hello

  Suggestion for Microsoft

  I hope this helps.

• The battery is completely discharged during the night: 100-0%

  Apple has done with the 9.3.1 update my broken ipad.
  The battery is completely discharged during the night: 100-0%
  What should I do?
  translated with Google *.

  THX

  Mimatete

  Find out what applications are running in the background and delete the unnecessary ones.  Location service is such an evacuation.

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• Mac Air drains almost zero during the night when the laptop is closed.

  In the morning a few last that I was wake up an empty battery and I were not able to find a reason why. For example, last night, I have to close to 33% and earlier this morning it is 2%. My laptop used may use one/zero to 100 during the night, so I don't know what it is.

  The laptop isn't a deal and is closing completely. During the closure, it is either not sleep or something it is waking up. I looked at the activity monitor and nothing takes too much energy (but something could stay while it is supposed to sleep, but I don't know if there is a way to check that).

  I'll leave it open tonight and just push sleep in the menu apple tonight and see how it works. Even if it works, I wish I could just shut up because this is supposed to be able to do.

  Also, I recently downloaded Skype plugin and it's, it's the only change I made in the time this problem started, which may have something to do with it.

  MacAir 11', at the beginning of 2014

  El Capitan 10.11.4

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

  If this does not help, the backup computer and reinstall OS X from recovery.

  https://support.Apple.com/en-us/HT204904

• Why firefox clear URL during the night

  different URLs (websites) disappear during the night, from the search bar. I put them back in and use the arrow down during the day, through the night, they disappear. Any suggestions

  Hi luapg,

  1. Click the menu button

     

  2. then click on Options.
  3. Under history, make sure it is set to the Firefox will: story to remember

  Make sure also that under the address bar, the history is checked.

  If you run any kind of PC cleaner which could also be compensation history of Firefox that will keep him to suggest Web sites.

  Alternatively, if you click on the star to bookmark the Web sites then Firefox will save them permanently.

  If you try, under the address bar, Favorites is checked.

  Let me know if that solves your problem.

  -Curtis

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer fills up during the night with 50 GB of additional storage used. Why would he do that?

  I have a 500 GB hard drive. He "filled." 0 bytes left. I bought an extra external hard drive and have installed 250 GB on the new hard drive. I did NOT use the computer during the night. In the morning, the original hard drive was new. Why would he do that?

  I suggest you use a utility like the size of the folder to try to identify where the records are piling up.

  (for example I recently used it to track down a mystery space where it turns out the user contained a diagnostic trace activated accidentally in a safety program that created constant log files in a deeply nested subfolder.)

  Download it here.  With any freeware watch carefully for dishes bug prompts during installation.

  http://www.Mindgems.com/products/folder-size/folder-size-download.htm

  Also, I've seen some hard to find root kits that Norton probably would not find cause this problem. I suggest that you run these additional free tools-

  TDSS Killer
  http://support.Kaspersky.com/5353?El=88446

  By downloading and installing these be sure to get the free version. Say no
  for all offers free trial or the auto update during installation to keep the functional free version.

  Malwarebytes
  http://www.Malwarebytes.org/products/malwarebytes_free/

  SUPERAntiSpyware
  http://www.SUPERAntiSpyware.com/

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you