My keyboard and messages

Similar Questions

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Desktop HP Pavillion Mini: unify dongle that connects the wireless keyboard and mouse on the HP Pavilion Mini Office

  I bought the product online at Amazon.com. I lost the unifying dongle that connects the keyboard and mouse wireless for the mini PC. No knowledge of a store selling the usb dongle online in the USA? Here is the data on the area where the mouse: model number: MG-1451 / 1452-RG, country of origin: China, identification number of the KCC: IPMPC-CRY-HPK-MG-1451 and IPMPC-CRY-HPK-RG-1452. Help, please. Thank you.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.
  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

• Keyboard and mouse freeze on Satellite L355

  Occasionally, immediately after startup or the awakening of the day before, the keyboard and the mouse freezes as soon as the keyboard is used.
  The mouse works before the Frost, but will stop as soon as the keyboard is used. For example, the computer works fine and I can launch a program, download email etc, but as soon as I use the keyboard then it freezes.

  A USB or wireless mouse works in this mode, but not the mouse computer. On-screen keyboard also works with the external mouse. Unfortunately, I don't have a USB keyboard to see if it will work also.

  Any ideas?

  In my view, this problem could be linked to the question in your other thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=172295

  Maybe all these laptop strange behaviors are related to the question of the motherboard
  Therefore, as suggested in the other thread:
  Get back in touch with the guys from the ASP. They replaced the mobo twice
  Maybe it was not good enough.

• Satellite Pro L300 - keyboard and touchpad issues

  Hello

  I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

  I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
  The keyboard caps lock key is not even lights up when I press it.
  I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

  I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

  Any1 have any ideas?

  Thanks :)

  Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
  Could this be something 2 do with the download of the VFR package?

  The touchpad is always tired, even when I try the fn + f9 combo?

  2nd edition: Ok now the keyboard stopped working again!

  ON EARTH!

  Hello

  Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
  I recommend you visit your dealer and replacement request
  Otherwise, you may contact the ASP in your country for a fix

  I think it's everything you could do

  Good luck

• HP K2500 keyboard: compatibility of the keyboard and Wireless mouse

  A few months ago, I bought a HP x 3300 wireless mouse for my Lenovo PC. Today, I bought a wireless HP K2500 keyboard and was hoping to use the same nano dongle. I can't make it work and so I am currently using 2 nono donlges. one for each device. Is it possible to rotate the two pieces of the kit through the same dongle and if so, how can I do?

  Hello @AndrewL1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you have a problem with the wireless keyboard and mouse, and tried to help you!

  Unfortunately, you cannot connect two devices to a USB receiver.  You will need the USB receiver for each device.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Keyboard and trackpad not working not

  Hello world

  so I bought my macbook pro in September 2015 and since then I have problems with the keyboard and trackpad doesn't work do not randomly. I brought the device to an Apple dealer and that they could not fix it, because at the point where the laptop was working fine. This morning I finally found something useful in the newspaper.

  First, while the keyboard and trackpad work not I received a lot of messages like this in the console:

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x402E, received 0x0000

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  Then it happened:

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0xD8A4, received 0x0000

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x45B4, received 0x0000

  10/01/2016 11:09:21.000 kernel [0]: AppleHSSPIController::_enqueueSPICommandGated SPICommand has expired. 208, transactionType 64, frameNumber 0 interface

  10/01/2016 11:09:21.000 kernel [0]: error: internal Apple keyboard / Trackpad::_DoDescriptorRequestGated has no question of error request: 0xe00002ed

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [ATC] [error] AppleDeviceManagementHIDEventService::processCriticalError received Critical Error: 0x00000010

  10/01/2016 11:09:22.003 SystemUIServer [404]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.003 blued [93]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.004 SystemUIServer [404]: error: [AppleBluetoothHIDDeviceGen2] [_setEventService:] could not copy address BD_ADDR

  10/01/2016 11:09:22.004 blued [93]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: button (0x03)

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [MT] AppleMultitouchDevice::start entered

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [MT] AppleActuatorHIDEventDriver::start entered

  10/01/2016 11:09:22.000 kernel [0]: enter BuildActDeviceEntry

  10/01/2016 11:09:22.000 kernel [0]: AppleActuatorDevice::start entries

  10/01/2016 11:09:22.000 kernel [0]: out of BuildActDeviceEntry

  10/01/2016 11:09:22.000 kernel [0]: Apple keyboard internal / Trackpad::start successful start

  and now everything works fine.

  Now my question is: can I bring my camera to a repair because it is still under warranty, but I need my laptop everyday. What should I do? Buy a new one and then put it back? I can't believe that I have questions about a machine, I paid over 2 k euros.

  Do you think is a hardware problem or an osx bug? I'm under 10.11.2 btw.

  Thank you.

  Not OK, so no support in this forum... I called apple and they told me I should put the laptop to apple repair center I did, but they could not reproduce the error (which is random) so that they could not fix it... Now, what are my options here? Am I stuck with a defective machine I paid 2400 euro?

  If you choose apple to have a portable stable and a good customer support as I have, please, be aware of this...

• Wireless keyboard and mouse

  Hello

  I just got a NX810 46 '' LED TV. Its very difficult to type or enter characters using the Sony remote. Is there a mouse & keyboard that I can hook up to the TV that works. I tried the keyboard and logitech wireless mouse and it doesn't work.

  Any help is appreciated.

  Thank you
  Sunil

  Thank you for your message.
  The Bravia KDL46NX810 television can't add them on the keyboard or the mouse. You must use the TV remote to navigate on screen keyboard.

• Pavilion 6543tx: keyboard and the touchpad works do not after windows 7

  Hello.. I have upgraded to windows 10 days back. But as the cursor froze a lot, I switched to windows 7 today. Now the situation is worse. The touchpad or the keyboard does not work. I tried to connect the keyboard and mouse external, but also those who did not. I am able to connect to windows through fingerpass, but unable to do anything. Please help as soon as POSSIBLE. Thank you!

  HI @Milind_Thakur,

  Thank you for your inquiry.

  I understand that you upgraded to Windows 10, but due to a problem with the cursor freezing frequently, you returned back to Windows 7. Now the touchpad or keyboard to respond. Connect a keyboard and an external mouse also did not work. You are able to log into Windows with your fingerprint, but are still unable to access anything whatsoever.

  I'll try to make a recovery to factory.   Computers HP - performing a recovery of HP (Windows 7) system. If you can not access the Recovery Manager, you will need a recovery media.  If you have not created your recovery discs, please contact HP support to obtain a recovery kit. Please contact HP to Contact HP Supportassistance. If SD not do you a backup before this all started, you will have an option during the recovery to do.  If you need it, here is a link to the computers HP - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

  Please let me know the results.

  Thanks if it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' for my effort help, click on the "Twww.Mountainview.rsb.qc.ca Up" " " give me a Kudos.: catvery-happy. "

• Keyboard and wireless mouse no longer works

  my keyboard is msi star type ES500W. Computer... top of wind msi ZE2010. After changing the batteries in the keyboard and mouse wireless, they no longer work. The computer says that they are beautiful, but they don't work! I'm not computer savy so please talk to me as tho I'm in kindergarten. Thank you

  Hi Louise,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  3. what version of Windows are you using?

  Perform the following methods and check if it helps.

  Method 1:

  Try to connect the keyboard and mouse to any other computer / or any other port and check if it works very well.

  Method 2:

  You can try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  You can also try to update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 4:

  You can also try to synchronize the device with the receiver again. Then try to reinsert the batteries. Also, look for the interference of signal from nearby electronic devices.

  Hope this information is useful.

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My cat stepped on my keyboard and the monitor on the side reoirented. How should I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My cat stepped on my keyboard and reoriented the monitor on the side.  What key press sequence to fix it?

  You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hold down the CTRL + Alt keys and use the arrows to rotate back. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Keyboard and mouse both stopped working

  I use Windows XP and I installed the Miscrosoft and Elite for Bluetooth keyboard for more than a year. Message indicating batteries were weak on bluetooth had changed batteries in the mouse and work for awhile and then keyboard stopped working changed batteries in the keyboard and hit the do/brake connection and keyboard do not work and then the mouse work stoppage has also.  Don't remember if provided with the CD. If she did cannot locate it. Problems with the initial installation should be installed by Microsoft via the internet. I also change upgrade internet explore and had problems, but was able to get exceptional technical support to fix. The new batteries do not understand what is happening.

  Hello MommieT,

  Thank you for your message.  You must reconnect/sync your bluetooth devices after the batteries have been changed?  What is the model of your bluetooth devices?  You can click HERE to find your model and look at the installer for these devices.  It can show a step that missed you after replacing the batteries.  Please let us know so that we can help you get this problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard and mouse not recognized

  HP Pavilion P6620f Win 7 when I first starts the job of keyboard and mouse (for access to the bios, etc.), but as soon as Windows starts and my login screen the keyboard and the mouse do not work.  There is being able to go to both because they have lights lite on each.  I tried unplugging everything, including the power cord, and I removed the motherboard battery to try to reset it.  Nothing seems to work.

  Hello

  I want to say that you don't have to disconnect the keyboard and mouse USB while trying this process. Once you have removed the USB drivers, the computer would have to re - discover the keyboard and mouse as a new device that may have circumvented the problem. So I read your reply message and it seems that you are unable to use your mouse and keyboard in safe mode. This is due to a problem of driver at this point. So there are only a few options left at this point in time:

  1.) Perform a repair windows (not a reinstallation of the operating system), so that you can verify the integrity of your system drivers. At startup, you need to press F10, F11 or F12 to get into the system recovery.

  Repair automatic running of the recovery disk is easy. After your system starts on the recovery disk and you follow the troubleshooting | Path via the menu advanced options, you will see the screen shown in Figure Aadvanced. Among the tools available on the screen advanced options, you will see the auto repair.

  Figure a. Advanced screen, you will find four other tools that you can use to recover a damaged Windows System.

  When you select the automatic repair option, you will see the screen shown in Figure B.

  Figure B your first line of defense when it comes to recover a Windows 8 system is the automatic repair option.

  Once you launch the automatic repair, it will begin to diagnose the problem to start and you will see the screen shown in Figure C.

  Figure C in the first stage of its operation, the automatic repair will diagnose the problem.

  During this diagnostic phase, automatic repair will scan your system and analyze the different parameters of the configuration options and files system searching files corrupt or botched configuration settings. Specifically, automatic repair will look for the following issues:

  • Missing/corrupt/incompatible drivers
  • Missing/corrupted system files
  • Missing/corrupt boot configuration parameters
  • Corrupt registry settings
  • Metadata for corrupted disk (master boot record, boot sector or partition table)
  • Installation of the problematic update

  If it detects one of these types of problems, it will automatically attempt to correct them, as shown in Figure D.

  Figure D auto repair has a diagnosis of your problem starting, it will attempt to fix it.

  If the AutoFix can solve the problem, she will do without any intervention. It will then reboot the system and start normally.

  2.) backup your important data and restore complete system of the operating system.

  If you have any further questions please send me a message.

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  > Please click on Bravo, if this information was helpful >

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.