my knee is locking when I used it to play nfs most wanted. How to use without blocking?

Similar Questions

• BlackBerry smartphone keyboard locks when you use the media player

  Hello

  I use the built-in Media Player to listen to the MP3, while I'm working.

  Because I am constantly moving away from my Office I must pause and start the music quite often.

  Sometimes the keyboard will lock everything playing, and I would like to avoid this. As I know the "BOLD" is not an option to automatically block the keyboard.

  Please can someone advise how can I stop this?

  Thank you

  Paul

  Hi guys,.

  Thank you both for your responses.

  I managed to find a solution to my problem, so I thought I would post, not only for the benefit of third parties, but because I thought it was funny when I realized what was causing the keyboard lock.

  When I have my BB out on my desk, I put on the case. I noticed the other day it was light as soon as I picked it up and goes dark as soon as I put it down.

  I checked for password, settings etc. of the screen and couldn't work on what was going on.

  Then I realized, because I rely on the case in the same way that he would lie if it was in the Holster, the magnets (I think there are magnets in the Holster?) were lining up at the BB and she believed that it was inside the case.

  Solution: I know put on the case, but turned around 90 degrees so its cross-cutting installation. Solved :-)

  Paul

• LockTimeoutException tries to promote a lock when you use a sequence?

  Hi, I'm on I 5.0.73

  I have 4 sons written to a database and each thread attempts to get a value of the same sequence. Falsely (as is the nature of these problems), I get a LockTimeoutException when the threads call com.sleepycat.je.Sequence.get(Sequence.java:341)

  Here is the result of the Exception for threads 3 (the other does not throw an Exception and ends very well)

  Thread "TradeWriter-1":

  com.sleepycat.je.LockTimeoutException: (I 5.0.73) lock has expired. Locker 1163009300 3095544_TradeWriter-1_Txn: waited for lock on the database = sequences LockAddr:130120503 LSN = 0 x 67/0x565e32 type = WRITING grant = WAIT_PROMOTION timeoutMillis = 10000 startTime = endTime 1385946530364 = 1385946540364

  Owners: [< LockInfo locker = '1958359210 3095546_TradeWriter-3_Txn' type = 'READ' / >, < LockInfo locker = "1163009300 3095544_TradeWriter-1_Txn" type = "READ" / >, < LockInfo locker = '301150106 3095545_TradeWriter-2_Txn' type = 'READ' / >]

  [Server:]

  1163009300 3095544_TradeWriter-1_Txn transaction has LockAddr:130120503 < LockInfo locker = '1163009300 3095544_TradeWriter-1_Txn' type = 'READ' / >

  Transaction 1163009300 3095544_TradeWriter 1_Txn waiting LockAddr:130120503

  "TradeWriter-0": vicryl

  com.sleepycat.je.LockTimeoutException: (I 5.0.73) lock has expired. Locker 1087485625 3095549_TradeWriter-0_Txn: waited for lock on the database = sequences LockAddr:130120503 LSN = 0 x 67/0x565e32 type = WRITING grant = WAIT_NEW timeoutMillis = 10000 startTime = endTime 1385946540366 = 1385946550367

  Owners: [< LockInfo locker = "1958359210 3095546_TradeWriter-3_Txn" type = "READ" / >, < LockInfo locker = '301150106 3095545_TradeWriter-2_Txn' type = 'READ' / >]

  [Server:]

  "TradeWriter-3: wire

  com.sleepycat.je.LockTimeoutException: (I 5.0.73) lock has expired. Locker 1958359210 3095546_TradeWriter-3_Txn: waited for lock on the database = sequences LockAddr:130120503 LSN = 0 x 67/0x565e32 type = WRITING grant = WAIT_PROMOTION timeoutMillis = 10000 startTime = endTime 1385946550368 = 1385946560368

  Owners: [< LockInfo locker = "1958359210 3095546_TradeWriter-3_Txn" type = "READ" / >, < LockInfo locker = '301150106 3095545_TradeWriter-2_Txn' type = 'READ' / >]

  [Server:]

  1958359210 3095546_TradeWriter-3_Txn transaction has LockAddr:130120503 < LockInfo locker = '1958359210 3095546_TradeWriter-3_Txn' type = 'READ' / >

  Transaction 1958359210 3095546_TradeWriter 3_Txn waiting LockAddr:130120503

  If my interpretation is correct, it seems that two threads try to promote a read to a write lock lock, which they cannot do because the other thread is read, and this results in a deadlock. Is this correct? If so, how can this be avoided? Exception for three threads stack trace is exactly the same. This is the upper part of it:

  to com.sleepycat.je.txn.LockManager.newLockTimeoutException(LockManager.java:664) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.LockManager.makeTimeoutMsgInternal(LockManager.java:623) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.SyncedLockManager.makeTimeoutMsg(SyncedLockManager.java:97) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.LockManager.lockInternal(LockManager.java:390) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.LockManager.lock(LockManager.java:276) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.Txn.lockInternal(Txn.java:498) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.txn.Locker.lock(Locker.java:443) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.dbi.CursorImpl.lockLN(CursorImpl.java:2621) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.dbi.CursorImpl.lockLN(CursorImpl.java:2422) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.dbi.CursorImpl.searchAndPosition(CursorImpl.java:2150) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Cursor.searchInternal(Cursor.java:2666) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Cursor.searchAllowPhantoms(Cursor.java:2576) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Cursor.searchNoDups(Cursor.java:2430) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Cursor.search(Cursor.java:2397) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Cursor.getSearchKey(Cursor.java:1668) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Sequence.readData(Sequence.java:542) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Sequence.readDataRequired(Sequence.java:527) ~[je-5.0.73.jar:5.0.73]

  to com.sleepycat.je.Sequence.get(Sequence.java:341) ~[je-5.0.73.jar:5.0.73]

  Uses internally a LockMode.RMW sequence during playback to avoid promotion locking issues, if it is not.  Looks like you're passing a transaction to Sequence.get, that holds the lock until you commit the transaction.  I suspect that you use this operation to other operations, and it may be deadlock prone.

  Although Sequence.get allows passing a transaction for ultimate flexibility, normally it is not a good idea and has little benefit.  Instead, pass NULL to use automatic update of sequence validation, or use another transaction to update the sequence.  If your transaction user abandons, the sequence will not be cancelled, but is normally not a drawback - it only means that, in this rare case, some sequence values will be unused.

  If the reason for which you pass a transaction durability or use a specific TransactionConfig, then create a transaction just for this go to Sequence.get and validate immediately thereafter.  Or, if you simply want sustainability NO_SYNC, open the sequence as a nontransactional data base database and pass NULL for the transaction parameter.  This latter approach is what I recommend, assuming that you do not use HA to replicate the sequence database (in which case it must be transactional type).

  -mark

• BlackBerry smartphone screen locks when you use Blackberry "BOLD"

  I administer a BES Blackberry Manager 4.1 running. We have a policy of lock screen that hangs on the screen after 30 minutes of inactivity. We have recently migrated to the Bold 9700 devices. Users are complaining that their device screen blocking and require a password even while they actively use it. I have experienced this personally as well.

  Is this a known phenomenon (one hopes) a documented fix or solution?

  Thank you

  Go to the COMPUTER policy and set long-term Timeout false under only peripheral elements

• DB restoration and recovery when you use followed the change block

  Does anyone know of a document that explains the restoration of the database and recovery when you use the block and the incremental backups the track changes? I understand how to turn the OTC market, and how it can shorten the time to do an incremental backup. I need advice when choosing the frequency of backups of 1-0 and level level and how it affects my food options. I also need to decide if the level 1 backups update the copy of most recent data on the disk file.
  
  If the copy of the data on disk file is updated by each level 01:00 am I right to say that I can restore to point in time that this moment occurs after level 1 has been taken? If so, then maybe I don't have level 1 update the copy of the data file on disk. If I take a level 0 Sunday and daily level 1 Monday - Saturday, so I think I can restore to any point in time after the 0 level.
  
  A lot of documentation explains my backup options, but there is less material tell how my backup choice affects my food options.
  
  
  Thank you
  Bill

  BCT applies to backups only, there is no connection with the restoration.
  I think you are confused about the difference between

  (1) incremental of backups
  and
  (2) "normal incremental backups".

  In the first case (see http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmbckba.htm#CHDEHBFF), in the base implementation because an incremental backup is applied to a still image copies and you cannot go back to an earlier point in time – before the changes applied.

  'Normal' incremental backups are done after a full backup (level 0), you can return to the level 0 backup earlier.
  RMAN follows rules of detention, in the basic version of an incremental backup that is updated, you have a retention of redundancy policy 1. This means that a full backup (image of copies, which are updated by the incremental backups again and again) is available.
  Backup incremental 'Normal' in most cases after a few days recovery windows - a time window.

  Werner

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• XControl always locked when it is used in class - possible bug?

  Hello

  It is no different in this issue. However, I think the question is slightly different and maybe a bug. If the following steps:

  1. Create a project,
  
  
  2. create an XControl
  
  
  3. create a class,
  
  
  4. Add an instance of the XControl to a class method

  You should see that the XControl is locked all the time. This happens only when the XControl is used with a class. If the XControl is placed on a VI, in a library project or not, the XControl will only be locked when the VI that he uses is open (i.e. in memory and the XControl is running).

  It can be expected behaviours because of the way the classes are loaded; However, as a user I find that it is unexpected - is this a bug?

  Kind regards

  Steve.

  Unlike normal libraries (.lvlib), classes always loading all their members live in memory when the class is loaded in memory.  So if one of these screws using an XControl, then it will be blocked as soon as you load the class owner in memory, even if the VI is not open.  You might be able to work around this problem by right-clicking the XControl in the project and selecting "unlock the library for editing.  It would temporarily break any screws that call the XControl until you're done editing.

  Chris M

• Lock on some of my icons, as well on my desktop and visible when you use Windows Explorer.

  I have these small yellow or gold (according to the colors of your screen) padlock superimposed on some of my icons on my desktop and visible when you use Windows Explorer and would would like to know how what they are, and how I can remove them.

  Hi Will,

  Thank you for keeping us posted.

  Glad to know that the problem has been resolved.

  I appreciate all your efforts really to try to solve this problem.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  We will be happy to help you.

  Thank you.

• I don't see the lock when you shop online. Is it still safe to shop?

  I've upgraded to the latest version of Firefox, and now I don't see the lock when I try to shop online. Is it still safe? Is there still a SSL or is there a problem that would allow my info is visible by thieves?

  It has been modified. Please read this article:

  https://support.Mozilla.com/en-us/KB/site%20Identity%20Button

  You can use this module to retrieve the classic icon:

  https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

• a macbook pro with retina display becomes hot when in use?

  A macbook pro with retina display becomes hot when in use?

  Yes.  All of the skin of the MBP is part of the evacuation of heat, not only the arriere-charniere event.  That's why running the MBP on a hard flat surface is better, so the room air can cool down all surfaces.  He put on a hidden or your knees when running may block exposure to air.

  High intensity running video uses graphics and CPU harder, needing cooling.

• iPad pro will change not in horizontal when I use the Pixlr App. Unlock is disabled in the settings.

  My ipad pro will not change to the horizontal when I use the Pixlr app. It works in other applications. I already have the power off screen lock in the settings.

  Contact support Pixlr from the link on this page > https://itunes.apple.com/us/app/pixlr-photo-editor-for-collages/id526783584?mt=8

• My laptop locked after I use it for several minutes.

  Hello world

  I have a really annoying problem.

  My laptop is locked after I use it for several minutes.

  When I say locked, I want to say it is the place where shows my account name and below it says locked.

  As a first step, I think it is caused by the automatic locking of cuz I'm really annoyed by this last, I uninstalled it.

  However it still does not.

  Could someone tell me what the problem is on the Earth?

  It's maybe just because I really don't know with my new laptop.

  It's a power setting that determines how long before its entry in the screen saver, sleep more, or even in hibernation mode. You can change the requirement for a password (somewhere in the Windows screen saver section) or the duration before entering these modes (you should be able to define with the Lenovo Power Center thing). Of course, making one is a security risk, but it is up to you as to how much safety or comfort desired.

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• Change "until published switch" "lock when released" type of trigger...?

  I'm still pretty new for LV and I looked around trying to find a way to change my event trigger, but with no result... maybe the wisdom of the Board of Directors can give information me.

  I have attached a VI that gives the basic idea of what I am working with two buttons and LEDS simulate the signal, I have another process.  Basically, I have two relays that are opening or closing of a valve to maintian has set value and I'm counting the number of times, it goes from the opening to the closing if I can detect '' hunt '' (i.e. - my valve reacts more quickly than expected and about to set of shooting)

  Relay loop signal is currently acting as I switches "switch Unitl out ' that sends a 'ping' event every time that the while exectutes, but I need the signal up to the counter to act as if I've changed the switches" lock when released "... y at - it a simple way to do this?  Yet once, I looked in the forums and knowledge base, with no results... any pointers in the right direction would be much appreciated!

  Thank you

  Chad

  Using LabVIEW 2009 Pro and Windows XP Pro, if that makes a difference...

  OK, got it!  Thank you very much!  Feel free to take a look and to criticize this and if someone sees an easier way to do it please let me know!

  THX,

  Chad