My kodak c315 esp not print from my laptop

Similar Questions

• My printer is not printing from my laptop.

  My PC that uses the same printer, prints fine. My printer is a HP Deskjet 932C and my default printer. When I check the control settings, everything seems as it should. Any ideas?

  Hello

  See the following steps to solve your problem:

  Click Start / run and type "services.msc" without the quotes, and then press enter or click OK.

  In the window that opens (Services) look for "Print spooler" on the right

  Right click on "Print spooler" and select "Properties".

  Click on the "Recovery" tab and replace all drop-down lists 3 "Restart the Service".

  Make sure that the 2 text boxes under '1' in them say.

  Click Ok until you return to the Services window, close that and're you good to go.

  Go to the properties of the "print spooler" tab, then click Start to restart the print spooler service and it will restart the service immediately.

  The print spooler depends on the remote procedure call (RPC) service. This service is disabled? Go to look for RPC services.msc. Check the status: automatic

  Hope this helps you.

  Concerning

• OfficeJet Pro8610: OfficeJet Pro8610 will not print from any website

  I use Win7 (64 bit) with SP1 and I had to replace an OfficeJet 6700 with a new all-in-one. I did it with an OfficeJet Pro8610 yesterday.  After a struggle to get the printer works wirelessly (it was necessary to connect to my laptop (HP) via a USB 1 port) I went to an online brokerage account last night and printed a statement.  When I tried to do exactly the same thing today I can't print of this site I've always been able to do with my old 6700 OfficeJet-it'ds.  In fact I can not print from any Bank, brokerage, etc sites now.  I've uninstalled and reinstalled the drivers, both online and with the CD rom, I turned off the printer, the laptop and the router and I have the same problem.

  Has anyone seen this kind of problem and managed to fix the problem.  Thanks for the help.

  Alkymst

  I have a 2nd question that I'll post separately because I can't connect a computer laptop 2nd in this printer.

  Alkymst

  Google Chrome has a tendency to stick to old files, printing and print settings. To resolve this problem, you will need to change the Destination before printing of Chrome. If your print queue is configured correctly and that you can print from other programs, then open print your window chrome. On the left hand side, click on change.

  

  Once you do you will be able to modify the print queue that uses Chrome and you should be able to print your PDF documents.

  Regarding the suggestion of networking if you see guidelines referring to the activation of the web services or by entering your request on the connected HP Code then you can skip these directions. These instructions are primarily for the ePrint service.

  I hope this helps and I hope you have a great weekend!

• my hp 5550 printer is not printing from a connection direct mac after replacing the drive hard * bleep * cause of

  my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall

  So, you have reinstalled the HP software after replacing the hard drive?

  What version of Mac OS X are you using?

• HP Officejet Pro 8600: HP Officejet Pro 8600 does not print from Tray1 or tray2 after hardcoding IP

  Hello

  We recently pre-programmed IP address for this printer and it has now 2 questions:

  1. it will not print from the default tray which is tray 2 (says it's out of paper) that is not

  2. in printing on tray by default, he's trying to print from the Tray1 which is the plateau of the envelope

  It worked fine for 2 years until this IP address change.

  Here's my device settings, who has always worked before the change of IP address:

  

  Thank you
  PAM

  Hi @RDVNA and welcome to the Forums of HP!

  I see that you are having problems of selection of bac. I would like to help!

  I have a few steps to get started:

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also download and run the HP print and Scan Doctor.

  Good luck and please let me know the results of your troubleshooting operations.

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• C6350 printing from a laptop, but not the other

  Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.

  I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please

  Too bad, solved with the help of cat online hp

• Photosmart 7850 will not print off my laptop

  I have a HP Photosmart 7850. It worked fine on my old office. I use a Toshiba laptop now.

  Twice I downloaded the Doc print from your site, and he sent a test print.... both worked.  However, I am still not able to print the laptop.

  I plugged the USB, printer, etc. I tried to use the CD with installation /download, but every time it says "Installation on the computer that is running is one of the supported Microsoft operating systems."  I have Windows 8.

  I need to print some important documents and get this operational printer.

  Is there a driver or a full CD download - as I can install it without the CD?

  Thanks for any help. (Toshiba is a "Satellite Pro C850 Series).

  I'm sorry you have a problem printing from your laptop.

  You get an error message when you try to print. Here is a link for the drivers and software. (A substitute for the CD).

  http://support.HP.com/us-en/document/c03460648

  If this does not solve your problem. You can download an alternative drivers. (Shane_R) has a great post on how to download.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  '"Click the WHITE STAR if you want to say thank YOU" '

  Let me know if it helps.

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• New wireless brother MFC-495 does not print Windows XP laptop

  Similar to other issues but quite different:

  1 installed the printer on the desktop that does not have wireless using the USB port.  Prints.

  2nd software installed on my laptop wireless.  I can see the printer in the Printers folder, it says ready, but will not be printed.  Printer has been implemented with the SSID, etc. and has even an indicator that it's getting the wireless signal.  I know that the laptop is wireless or I would not be writing from it now.

  How do I get my laptop and printer to really talk to each other?  BTW, my wireless router works fine from my phone runs Android on it.  Power doesn't have to be on the desktop for this.

  I really don't want the computers on the network since I will be out of the office, but so far the system made me do in my attempts to get the printer to print wireless.

  Rose

  I have all the IP addresses, but rather would not provide them.  Had problems with the protection of privacy on several fronts recently.

  When I go to printers and faxes, I have several printers 'shared' here.  Probably because I installed the drivers for the printer on the desktop and laptop.  Regardless, none of the printers to print from the laptop from the desktop computer.  The port on one is "roselaptop": Port TCP/IP Standard.  The other is COM4: serial port.  I have 2 computers on a network as a network home and figured that should solve the problem.  The laptop is the "residential gateway" in the network set up.  Looks like I should be able to add this wireless printer to the network.  It's playback a signal very well.

  I'll try to disconnect the USB cable from the desktop computer and see what happens.

  Thank you for all your detailed descriptions that have helped me!

  Rose

  You are currently too caveats regarding the IP addresses, but may help the following:

  When you have a router, the ONLY IP address that is "seen" by the rest of the Internet is one assigned to your router by your ISP.  The router assigns IP addresses to the devices to the 'internal' - your LAN - that's why they are called "private" IP addresses  There are three blocks of these private IP addresses: 10.0.0.0 - 10.255.255.255; 172.16.0.0 - 172.31.255.255; and 192.168.0.0 - 192.168.255.255.  Almost every router uses the third block (which has the smallest number of possible addresses).  And almost every default router uses is 192.168.0.0 - 192.168.0.255 or 192.168.1.0 - 192.168.1.255.

  Regardless a block of IP addresses used by your router, it is important that all devices are on the same subnet.  For example, if the default gateway (which is the local IP address of the router) is 192.168.1.1, then your computer AND the printer must have the form 192.168.1.x IP addresses.  If your default gateway is 192.168.0.1, then others should be 192.168.0.x.

  The difference between a shared printer and a network printer, the shared printer is a "resource" of a computer that is connected to the network.  In order to access a shared resource (if it is a file on the hard disk of the computer, or a printer attached to the computer by a cable of USB, series or parallel), the computer that "owns" the resource must be turned on and connected to the network.

  In your original post, you said that you had a wireless router.  This is the typical way that specific set up networks.  It is inconsistent, however, describing your laptop as the residential gateway.  Maybe say you you see an icon called "Residential gateway" laptop "My Network Places."  If so, this icon represents your router.

  Your description of the ports is also confused.  Usually, when you configure a port for the printer, the port name is the name you give to the printer - not the laptop.  But what is important here is that the IP address displayed on the screen 'Set up the Port' for the port of "TCP/IP Standard" that the printer uses (the one with the box), must be the same as the IP address assigned to the printer (which you find in print 'report Network Configuration' from the control panel of the printer).

• 4524 HPEnvy: Unable to print from my laptop

  I have a HP Envy 4524. I can print from my Ipad but not my laptop HP Pavilion. When I try to print from my laptop paper feeds by perfectly, but there is no printing on it. There is no question from my ipad. I've already printed normally from the laptop to the printer. Any help appreciated. I should add that test printing prints perfectly. His only docs etc.

  I re-installed the printer and all the drivers from scratch and I think it has solved the problem. Do not have time to do a lot of printing, but the three pages that I've done are very good. Phew! There was also a large 10 Windows Update available so I wonder if that had something to do with it.

• HP photosmart 4480 don't print from my laptop

  I am not able to print from a laptop, but the other laptop prints very well. All I get is "error - printing" message. It has never printed on this computer. I use Windows Vista Home Premium Service Pack 2 on a Dell XPS.

  Hello elkaydub,

  Welcome to the Forums of HP Support! I see that you have not been able to print from your computer on Windows Vista on your HP Photosmart C4480, you get a "error - printing" message.

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still can not print, please continue here: print jobs are stuck in the print queue

  I'll watch for your reply.

  Thank you

• Windows 7, and homegroup to print from my laptop connected wireless...

  I have 3 desktop computers running Windows 7, all networking, all in a homegroup with a HP all-in-One printer attached to one of the desktop computers. I also have a Toshiba laptop, also Windows 7 computer in wireless network and as part of the homegroup. When I print from the laptop, sometimes it will print and other times, it will send the print job but it's like the printjob enters the twilight zone and nothing happens. Confused on how to solve this problem, any suggestions?

  Hello

  1. What is the number of the HP printer model?

  2 are you able to print correctly on other computers?

  3. who is the antivirus installed on the laptop program? Is there a firewall integrated with the antivirus?

  4. is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that the firewall program is blocking the printer. I suggest you perform the steps.

  Method 1:

  Step 1: if you have McAfee or Norton installed on the computer, you can change the default firewall settings and check.

  Step 2: Disable the anti-virus software if installed some and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. open Administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on print spooler service and then click Properties.
  d. under the tab general , next to Startup type, make sure that Automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  See also:

  Why can I not print

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. Response with status so that we can help you.

• can I print from a laptop if wireless printers hooked to office without card wierless?

  I have my printer HP Deskjet hooked to my office, is there a way I can print from my laptop without wireless card?

  Thank you, you are welcome.

  Frank

• OfficeJet 6000 computer connected to windows 7. Unable to print from the laptop Windows XP

  Printer connected by USB to the Windows 7 desktop.  Printing is fine.  I have two computers on the same network of working group, file sharing is allowed.  My laptop detects the printer on the network, but there is apparently a driver problem.  The disc supplied with the printer will only install on XP and Vista, so downloaded the drivers for the new office of windows 7.  I either get a message "Failed to print" or "the handle is invalid."  When I tried to connect to the printer via the network of sharing and tried to open it, I was told that the wrong drivers were located on the server.  He had the air of a file with *. INF.  Do I have the wrong drivers on the desktop or do I need to install the drivers on the laptop?  I never had this problem with my old Vista desktop.

  Hello.  Finally, I was able to install additional drivers for XP on the server computer and can now print from the laptop.  Thanks for the help!