Once I have updated the firmware, can I go back?

Similar Questions

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  And moved to the DPS forum.

  The classic DPS plugins are not supported in CC2015. You go back to CC2014 for that. Only the new digital publishing Solution will be supported in CC2015.

• I have Win XP Pro aiinstalle and work for a while, I updated the firmware CD, now, it's asking to reactivate windows.

  I've updated the firmware CD now it asks for a product key, I used this laptop for severla months, I get the message that the key has been used too many times and you need a new key.  I bought the laptop from a company farm selling off its old stock.

  Try what it sounded just like it has been reinstalled several times.
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.

  I hope this helps.

• Update the firmware without success

  Help!

  I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:

  Device: HP CLJ 2840

  Installation: network printer

  OS: Win 7

  Drivers: Installation of the Standard Win 7 drivers

  I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.

  I followed the instructions to the letter.

  I waited for the installation of the firmware to complete in its entirety

  I have noticed the messages shown on the device LED panel that followed the procedure.

  I noticed the face smiling at the end of the installation on the computer

  Result:

  Feature cycles as follows:

  1 turn on

  Toner of cycle 2 drums as usual

  3 LED panel shows marks in the upper part

  4 LED flashes once and 3 LED bars begin to scroll from right to left...

  5 witness bright and alert light stay lit

  6 this continues for about a minute... then the cycles of line 3... over and over again

  The device is no longer visible on the network

  HOWEVER

  Even invisible on the network, I managed to run the program from firmware to success... a second time.

  Help, please!

  Our office is stuck without this printer.

  Thank you

  Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• 'Fatal error 65' when you try to update the firmware of the printer

  The printer firmware update fails with 'error 65' displayed on the screen of the printer.

  I have the HP LaserJet Pro 200 M276nw MFP color, just one month outside the window of the guarantee. Downloaded the latest version of the driver M270_colorMFP_Series_FW_Update - 20140718.exe and followed the instructions on how to upgrade.

  The computer running the installation displays no error and I get the face smiling at the end. However, the printing configuration always displays the old driver from 2012. Also, the printer display does not progress as stated in the manual of stable employment. On the contrary, at some point it displays 'Error 65' and then restarts.

  How can I update the firmware?

  Please try to use the 20140521 version only, I currently have audit whitin HP why 2 different firmwares are posted and will let you know once I'll get an answer... for now please DO NOT try to install the 20140718 version...

  Shlomi

• Update the Firmware on SG200-18

  I need to update the firmware on the SG200-18 to the latest version. Which of these links, and subsequently, what file I need to download for that (I just need English)?

  http://software.Cisco.com/download/type.html?mdfid=283783779&flowid=24309

  Thank you!

  Hello

  You are in the right place, you want to select the SMART switch firmware.  The MIB are SNMP, so you don't need to enter those unless you have to.  Once you click on the scroll to the bottom of the list and select:

  SX200 Firmware Version 1.3.7.18 
  sx200_boot - 13506.rfb

  and

  SX200 Firmware Version 1.3.7.18 
  sx200_fw_1.3.7.18.Ros

  You will need to update the firmware as well as the startup code.  I suggest doing both and then just restart once.  Note that the startup code requires TFTP to transfer, I usually use TFTPD32 for this.

  We also have a little longer then usual for the switch to reboot when first upgrade you the firmware, because it made some changes to the file system internal to the switch. If you are comforted in you can watch the progress.  Once you start to feel it takes too much time, wait a few minutes and it should come up (I waited for a good number of these improvements in the laboratory).

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Update the firmware on PowerEdge R815 for H700 - how?

  I want to update the firmware H700 integrated into my new 12.0.1 R815 - 0091 to 12.3.0 - 0032.

  My first thought was to start from Systems Build and Update Utility with a copy of the am630_suu_a00.iso that I had downloaded, concatenated, and copied onto a portable hard drive connected to a USB port.

  It worked well for the ports of Broadcom, but when he reached the R815 BIOS and firmware H700, he'd say he was going to update and then say that it would restart (confusingly telling me to 'remove all media startup' but I'm pretty sure that the DVD SBUU was supposed to stay, since the instructions say to keep start-up it until all updates are done). However, the machine simply restarted. It did not save pending updates to a partition so he could update at the start, and he did not ask me to insert a USB key for storage (implied by the text that flashes quickly by on the screen after you click Apply). I found myself on-screen SBUU once again, and firmware updates were not managed.

  Finally, I gave up this approach. I thought maybe I could run the updates directly on the SUU volume but I had installed Windows Server 2008 R2 x 64 and SUU files run apparently only for x 86.

  So I installed the x 86 version of Windows Server 2008 and now I can click on suulauncher.exe and run it as an administrator. SUU 6.3.0.267 launches and usefully shows me the updates of the firmware, I need, and I can choose them. But when I click on the button to update and I confirm that these updates will happen, absolutely nothing happens. You can see a screenshot here where I'm about to click on: http://imgur.com/R8jzm to reading online, I think that a progress bar is supposed to be coming up next. I looked at the C:\Dell\suu\support.log file and it says the following:

  FINE: com.dell.suu.cm.BundleProcessor.processUpdateButtonEvent (SystemBundlePath) is G:\.\repository\PER815-WIN-R258158. XML

  WARNING: com.dell.suu.cm.CustomBundleXMLGenerator.generateBundleXML)

  An error occurred during the transformation of this when creating the custom XML part

  I thought that maybe I had a SUU image corrupted, so I re-extract ISO but got the same error.

  Then I thought, why not just run the stand-alone package update RAID_FRMW_WIN_R269685.exe (using run as administrator). It's very encouraging, but then he says "This update Package is not compatible with the configuration of your system." Why is it not compatible? I have a built-in H700.

  I am clearly out of my League here. Others really spend several days trying to update the firmware? I'm leaving on the parts where I create a bootable USB key with BACK and try to run the DOS version of the update of the firmware MegaFl.exe, only to discover that the FW872I.rom file is not found, and the parts where I break down crying.

  Any advice would be greatly appreciated. Before go me crazy.

  was there a particular reason that you have run RAID_FRMW_WIN_R269685.exe? You must run RAID_FRMW_WIN_R269684.exe instead.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Disk image to update the firmware in linux?

  I recently bought the a Ultra II SSD 240 GB and I wanted to make sure I'm using the latest firmware. To my surprise, there is no way to update the firmware in Linux.

  My current firmware version is X31200RL (the description of disk indicates this)

  It is the most recent?

  Are there links to the upgrade image that I missed? Even if you can confirm that I am on the latest firmware at the moment, I would like to be able to improve in the future if a new appears.

  A simple link to download the iso file would be sufficient, given that most Linux users are users anyway.

  Thank you

  you have the last FW for the Ultra II SSD. If a FW is released sandisk ISO messages which can be burned on a CD to update on Mac and Linux on this forum and the sandisk knowledge base.

• Update the firmware from E4200v2 to 2.0.37.131047

  I hope that I don't have a big mistake buying Cisco... I just bought 3 routers E4200v2. As I am preparing to install, I try to update the firmware of 2.0.26-> 2.0.37.  I downloaded the zip file from the site of Cisco technical support and when unzipped the file is named FW_E4200_2.0.37.131047.SSA. When I try to do a manual update of the Admin page, I immediately get an image file is incorrect error.

  I downloaded the file three times in total on 2 separate networks and have tried three different browsers to try the update, with the same error. Support chat sessions proved worthless, they seem very scripted and the last of them has always tried to sell me a support contract...

  I want to stay with the classic firmware, even if there is no current bugs. Someone at - it a 'good' copy firmware 131047? It seems to me that one on the Cisco site is broken.

  You can rename the file FW_E4200_2.0.37.131047.SSA in FW_E4200_2.0.37.131047.IMG or update the automatic firmware on the router page (this 2.0.37.131047 firmware will allow you to update manually to 2.1.38.138880).