My laptop does not display my desktop wallpaper.

Similar Questions

• Cannot disable touchpad on laptop. does not display the properties of inmouse

  cannot disable touchpad

  Hi hillarybell,

  ·         What I have

  s of the brand and model of the laptop?

  ·         Did you do changes on the computer before the show?

  ·         What happens when you try to disable the touchpad?

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager. Follow these steps:

  (a) click Start, run type devmgmt.msc and press enter.

  (b) in Device Manager, expand mice and other pointing devices and locate the touchpad.

  option c) right click on the touchpad and click disable . Click OK.

  You can also consult the manual of the laptop for more information and help.

• HP pavilion dv6 laptop does not display the logo of beats

  the beats logo used for the poster when I changed the volumes, but after that I used windows easy transfer it don't it shows more. I checked the settings of beats, but there is no option to make it appear again. any suggestions?

  You may need to reinstall the drivers of Beats on the HP site.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Impossible to change the wallpaper, the location of the image does not display images.

  Original title: photo location not display images

  I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
  I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
  In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
  One last thing.
  If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.

  Any ideas?
  James

  I got it working again.
  And that's a good reason to not mess with the registry.
  I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.

  James

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• 20wd: monitor does not display mac

  Hello

  I have a HP 20wd screen I got a while ago because I had a chance running 10 windows desktop computer.

  Now I have a Mac Book Air 11 inch running OS X 10 update.

  The problem is that the screen displays only the windows desktop, not the Mac.

  The mac CAN recognize the screen in the settings, it also the scale of the screen on the laptop to the monitor, but does not display anything.

  The output is through the thunderbolt adapter to a VGA monitor.

  I tried to change the monitor settings, althhough, it seems there is no driver for windows 10 for the monitor.

  any ideas?

  Thanks for your help!

  I used the the DVI d input and cable on the screen, and it seems to be there normally (YAY)

• Windows does not display the CD-ROM drive

  A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

  I did not major changes to my computer I know so I can't imagine what the problem is. Help?

  Trevor

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Display quality desktop wallpaper?

  The display of desktop wallpaper is always poor and does not properly handle the colors. My monitor is calibrated correctly with the pantone huey pro.  Color display correctly in photoshop and viewer of images, but not on the desktop.  How can I fix it?  Is there a setting somewhere that I have to change?

  I knew someone had a similar problem the thread below; However, it was never completely. http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/f18065a9-25b6-462C-b593-a1d8bb8eeb9a

  Response of Azam is misleading...  A JPEG file can be displayed as wallpaper and it can look very well.

  Your image itself carries an other than sRGB color profile?  Based on your description, I bet for this.

  If so, open the image in Photoshop and convert the color profile sRGB via the Edit -> convert to profile menu, then save the image, then place it during the desktop display.

  Windows does not in general, image color management and so it assigns (guess of any image is in) the sRGB color space.

  -Christmas

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• New tab does not display some sites, but nothing.

  When I open a new tab, it does not display the usual sites, but it shows just a white screen. Only the search bars and icons are displayed. It is not also a gear in the top right.

  Hi, try this: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.url and make sure that 'Value' is defined Subject: newtab (click right to change, if necessary, by taking care of not to change what anyone else).

  If this is not successful or if it changes, to try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• My laptop does not recognize the HDMI cable

  I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives.

  I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of months before the summer, but I managed to get back to work and it was very good and stil in good shape.

  A few weeks ago, I dropped the laptop from the desktop and it fell on a carpet. Isn't difficult, but not smoothly either. And it is always on when I got it up and working.

  When I stopped it the laptop refused to start. I did a quick diagnosis to check the hard disk and it says already something with red letters.

  I took the laptop PCs store and human a glance told me, the hard drive is dead and I need a new one fitted. "Everything is in good condition", he assumed, and I agree with him to change the hard drive.

  I told him specifically to replace the hard drive with another 1 TB, but he subsequently advised me with good confidence that I was better with a 320 and buy an external hard drive. The laptop will work very well in terms of speed. He mounted in a 320 HARD drive and gave me back my laptop with Windows 7 ultimate.

  Now, the laptop does not connect to HDMI and AMD catalyst is recognized not no matter how many times I install it. And honestly I don't know if the man really had something out of my laptop. The HARD disk he gave in return tells me his Samsung S/N: S34LJ9BG601601648

  ST2000LM003 A REV.

  PN:HN - M201RAD/M 2000 GB + 5v 0.85 A

  Please tell me that it is a HP Pavilion HDD and how can I get the laptop to recognize the HDMI connection on the flat screen TV?

  PS: I checked the amount of space to the new HARD drive that had been installed in and it said 297 GB not 320 GB. Am I missing something? Why can I not see all of the HARD disk if it is 320?

  Sorry for the long discription, I stop here.

  Nope.

  Try this:

  Click on the link below to see how to find your model number...

  Computers how can laptops HP - I find my model number, the serial number or product number?

  Scroll to option 3 to see what to look for an explanation.

  Let me know.