my laptop doesn't work well in safe mode... How do I please you? It's a laptop Dell 1520

Similar Questions

• Windows Vista hangs after choosing the identity of the connection. works well in safe mode

  I was able to start windows in safe mode, and then create a new connection profile.  However, Windows doesn't always starts normally.  Using the original profile causes the screen to go black after the "Welcome" screen  Using the new profile causes the screen to go to blue after the Welcome screen.  It's a laptop with nothing fixed.  everything seems to work fine in safe mode, so I think it's a matter of profile.  There is no restore points, so I can't use system restore.  Any thoughts?

  Bob J

  Hello Ripplemaker1,

  I have to agree. This sounds like it may be some kind of malware in game.

  I recommend you create a new thread in the forum security, privacy, and user accounts for this piece of the puzzle.

  Best regards

  Matthew_Ha

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Firefox starts slow, but works well in safe mode with all the running addons - why?

  Then... all of a sudden my Firefox (v. 38.0.1) is really laggy, with slow-to-respond buttons, scrolling etc. So I manually disable all addons, but nothing helped. Then I try safe mode and it works very well. Large. So I turn on my addons again one by one, until they are all allowed and it still works fine. My conclusion: it isn't the addons. What is what is the cause? I have updated all my addons and just Silverlight, Flash, Google updater, Shockwave and some others.
  One solution would be for this mode - Safe with addons running - being my default start mode, but I can't work out how to do it. Is no huge problem because I can make Firefox work perfectly, but it's a little bit of your time.
  Any ideas?

  Hi RufusWalker, please see if Firefox is slow after upgrading to Firefox 38 covers and solves your problem.

• C670 D-115 satellite slow, works well in safe mode

  Hello

  After a clean install, it took 2 days to download all files from Windows Update.
  All operations that use internet are slow, searching for files seems to work well.
  Speedtests DS are 10Mbit on WIfi and LAN (100 Mbit connection), U.S. run more rapid 17 on WIFI 90 Mbits on LAN. In SafeMode with networking of all series of correct.

  I know I can try disabling drivers one by one (msconfig) to find the one that is causing this. But I was hoping that someone knows the problem and can save me time, best, Frank.

  * My C670 D-115 Satellite part: PCS4AS-01100rdu, SER. 4C072800R, Win 7 SP1 of the Prem, *

  Have you installed original image recovery or your own version of the OS?
  After clean OS installation Windows Update set to automatic so downloading updates runs in background and it slows down laptop performance quickly, especially if you need internet connection.

  Change windows update settings and set it to check for updates but let me choose whether to download and install them.
  When you have finished your work, you can start update installation.

• MacBook pro works well in safe mode but freezes in normal mode

  Now I'm in safe mode, but if I restart in normal mode. It freezes.

  I have chosen of all the startup items.

  I ran the diagnostic test suggested by Linc Davis report.

  Start time: 10:29:16 04/30/16

  Model identifier: MacBookPro11, 1

  The system version: OS X 10.11.4 (15E65)

  Kernel version: Darwin 15.4.0

  Start mode: security

  Integrity of system protection: enabled

  Since the starting time: 10 minutes

  FileVault: on

  Diagnostic reports

  2016-04-06 CudaDriveInstall crash

  2016-04-06 GoogleTalkPlugin crash

  2016-04-06 IMDPersistenceAgent crash x 2

  2016-04-06 ReportCrash crash

  2016-04-06 cloudd crash

  2016 04-06 com.apple.CommerceKit.TransactionService crash

  2016-04-06 recentsd x 5 accident

  2016 04-06 suggestd accident x 5

  Crash of Microsoft Error Reporting 2016-04-12

  2016 04-27 com.apple.WebKit.WebContent crash

  Journal

  30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

  30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

  30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

  30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

  30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

  30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

  30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

  30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

  30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

  30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

  30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

  30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

  Demons

  com Apple.Installer.osmessagetracing

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  -com.cisco.anyconnect.gui

  / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

  -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

  -com.teamviewer.teamviewer

  /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

  -com.teamviewer.desktop

  /Library/LaunchDaemons/com.Adobe.fpsaud.plist

  -com.adobe.fpsaud

  / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  -com.cisco.anyconnect.vpnagentd

  /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

  -com.cudadrive.cudadrivesvcd

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  /Library/LaunchDaemons/com.TeamViewer.helper.plist

  -com.teamviewer.Helper

  /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

  -com.teamviewer.service

  Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

  -com.citrixonline.GoToMeeting.G2MUpdate

  Beams

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  / / Library/Internet Plug-Ins/Flash Player.plugin

  S/O

  / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

  -com.google.googletalkbrowserplugin

  / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

  -com.google.o1dbrowserplugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

  -com.dell.scan.Dell2155ColorMFP.prefPanel

  / Library/PreferencePanes/Flash Player.prefPane

  -com.adobe.flashplayerpreferences

  /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

  -com.teamviewer.AuthorizationPlugin

  / Library/Widgets/Status Monitor.wdgt

  -com.dell.print.statusmonitor.widget

  Library/Address Book Plug-Ins/SkypeABDialer.bundle

  -com.skype.skypeabdialer

  Library/Address Book Plug-Ins/SkypeABSMS.bundle

  -com.skype.skypeabsms

  / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

  -com.citrixonline.mac.WebDeploymentPlugin

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Featured: indexing and search disabled

  Firewall: on

  Small files: 43

  Time elapsed (s): 272

  If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

• My iMac doesn't work that in safe mode, normal mode the screen layout is really weird. Help, please! :)

  Hi guys,.

  Since yesterday my iMac 27 inches of the end 2009 has acted weird. Text was not good more visible and popupscreen were empty, white or black. (do not know why they are uploaded in reverse)

  

  Then I tried a clean install. Screen was working again fine. Then formatted my drive and installed the new OSX.

  

  Download went fine, but when installing the pop-up screens were not visible.

  

  After a few random reboots on my side, it worked again.  Thus, installation...

  But... Now, I always have the same question. In safe mode, everything works fine, but in normal mode, the screen is *. Pop - up screens are blank/black or white, the numbers are mixed, etc. What it can be.

  I already installed it on an external HARD disk, reset the SMC and the PRAM, Test hardware (message only 1 failure: 4sns/1/40000000: TH00 - 9,000.) "But I think it's because I installed my SSD later, that's why I need to use a program like HDD control to control the fan).

  so... What can be? I've tried everything! If any of you guys could help me, I would like to do a happy dance ;-)

  You have a sensor error. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  Install El Capitan from scratch

  Restart the computer. Immediately after that the chime hold down the command and R until the Apple logo appears. When the Utility Menu appears:

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) in the list to one side.
  3. Click Delete in the main window of disk utility. A panel will fall.
  4. Define the type of Format Mac OS extended (journaled).
  5. Click on the apply button, then wait for the done button to activate and click on it.
  6. Quit disk utility and re-enter the Utility Menu.
  7. Select reinstall OS X and click on the continue button.

• iMac works fine with safe mode only

  iMac works fine in safe mode, but in normal mode, it freezes constantly, the wheel that turns, the freezing of the apps, and when I try to restart, it gets stuck. I have to hard reboot. I tried to reinstall the operating system, which did not help. I have reset the NVRAM, but it has not solved the problem. I came across another post in 2013, with another user who was having a similar problem. There are detailed instructions to run diagnostic tests via terminal and display the results. This seemed to fix the problems of the user, but I don't know what to do with the information it generates. I have an iMac 2009 El Capitan 10.6.11 running. Can someone help me understand what the problem is?

  Post edited by: Namaste85

  If you have any type of antivirus, cleaning or ANY other third party maintenance application installed, please find the developers instructions and uninstall. At best, these types of applications are 100% useless and at worst they cause more harm (similar to what you are experiencing) than good.

  If you don't have one of these types of applications installed, run a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?

  I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?

  There are instructions on this page to manage and stop automatic renewal of subscriptions: view, change or cancel your subscription - Apple Support

• My system restore does not work even in safe mode and I can't download anything.

  Original title: Hi, one day I turned on my pc. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work.

  There was nothing but my background, then after 2 minutes my desktop icons appeared. But no start bar. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work. Help! PLeeease.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us firstly the sfc scan and check if there is any missing system file.
  Reference:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  Try the methods listed in the articles below and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
  http://support.Microsoft.com/kb/

  Method 3.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

   
  MSIExec /Unregister
   
  MSIExec/regserver

  Method 4.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• my lap top is stuck on safe mode how to put this right

  my laptop is stuck in safe mode how to put this right

  Hello

  ·         When the issue started?

  Follow these steps and check if it works:

  a. Click Start, type msconfig in the search box and press on enter.

  b. Click Start, and then in the start option, check if the startup is checked.

  c. If it is checked, then please uncheck.

  d. then click general, select Normal startup.

  e. click on apply and then click ok.

  f. system prompts you to restart, please restart the system.

• My PC is infected with Vista Antivirus 2012. He keeps me get on the internet, so I can't use malwarebytes or antispywaredoctor because I can't go on the web, even in safe mode. Any help, please.

  My PC is infected with Vista Antivirus 2012. He keeps me get on the internet, so I can't use malwarebytes or antispywaredoctor because I can't go on the web, even in safe mode. Any help, please. How can I get rid of it when I can't get on the web?

  Try using the Standalone System Sweeper http://connect.microsoft.com/systemsweeper

  You download it on another computer and copy on a DVD drive or USB key. You can then do a scan without starting Windows.

  There is a list of CD received by other vendors antivirus here:

  http://www.TechRepublic.com/blog/security/rescue-CDs-tips-for-fighting-malware/3803

• Satellite L650 doesn't work well after the BIOS 2.40 update

  Hello

  I have a L650 Psk1je yesterday, I updated my bios to 2.20 to 2.40 and since then my laptop does not work well
  can someone tell me please how to downgrade my bios to 2.20 again

  Thank you

  Downgrade BIOS can be done using only a traditional BIOS version
  These versions are not available for download.
  You can download only the latest BIOS based victory.

  But why do you say that it is not working properly?
  What s wrong?

• reently downloaded updates and now my computer doesn't work well, I get a mozilla does not message every time I try to look for

  After updating my mozilla, I get a message not responding

  Hello bwallace57, your "more detailed system", it seems you have a little suspect for malicious software extensions (GetSavin, MyPoints Score!, MyPoints Toolbar, entry-level consumer).

  You can verify the behavior of firefox in safe mode (safe mode are disable the extension)

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  also, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  et Check in the Windows Start menu > Control Panel > programs > uninstall a program, uninstall everything related to the above extensions

  and finally remove the User.js filein your firefox profile folder .

  (The user.js file does not exist by default. If you create the file, forget it, otherwise, please note that some programs to create and write in the User.js file also).

  Thank you

• my laptop starts fine, but when I enter my password it freezes, it works fine in safe mode, I'm on it now

  my laptop starts up fine, but when I enter my password it just freezes if I do the same in safe mode it starts fine, what can it be

  Thank you I tried everything you said to know different then I remembered something similar that happened on one of my old computer.sp1 I restarted with this disc and it has started up

  everything is good now thanks

  Harry