C670 D-115 satellite slow, works well in safe mode

Similar Questions

• Windows Vista hangs after choosing the identity of the connection. works well in safe mode

  I was able to start windows in safe mode, and then create a new connection profile.  However, Windows doesn't always starts normally.  Using the original profile causes the screen to go black after the "Welcome" screen  Using the new profile causes the screen to go to blue after the Welcome screen.  It's a laptop with nothing fixed.  everything seems to work fine in safe mode, so I think it's a matter of profile.  There is no restore points, so I can't use system restore.  Any thoughts?

  Bob J

  Hello Ripplemaker1,

  I have to agree. This sounds like it may be some kind of malware in game.

  I recommend you create a new thread in the forum security, privacy, and user accounts for this piece of the puzzle.

  Best regards

  Matthew_Ha

• Firefox starts slow, but works well in safe mode with all the running addons - why?

  Then... all of a sudden my Firefox (v. 38.0.1) is really laggy, with slow-to-respond buttons, scrolling etc. So I manually disable all addons, but nothing helped. Then I try safe mode and it works very well. Large. So I turn on my addons again one by one, until they are all allowed and it still works fine. My conclusion: it isn't the addons. What is what is the cause? I have updated all my addons and just Silverlight, Flash, Google updater, Shockwave and some others.
  One solution would be for this mode - Safe with addons running - being my default start mode, but I can't work out how to do it. Is no huge problem because I can make Firefox work perfectly, but it's a little bit of your time.
  Any ideas?

  Hi RufusWalker, please see if Firefox is slow after upgrading to Firefox 38 covers and solves your problem.

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• MacBook pro works well in safe mode but freezes in normal mode

  Now I'm in safe mode, but if I restart in normal mode. It freezes.

  I have chosen of all the startup items.

  I ran the diagnostic test suggested by Linc Davis report.

  Start time: 10:29:16 04/30/16

  Model identifier: MacBookPro11, 1

  The system version: OS X 10.11.4 (15E65)

  Kernel version: Darwin 15.4.0

  Start mode: security

  Integrity of system protection: enabled

  Since the starting time: 10 minutes

  FileVault: on

  Diagnostic reports

  2016-04-06 CudaDriveInstall crash

  2016-04-06 GoogleTalkPlugin crash

  2016-04-06 IMDPersistenceAgent crash x 2

  2016-04-06 ReportCrash crash

  2016-04-06 cloudd crash

  2016 04-06 com.apple.CommerceKit.TransactionService crash

  2016-04-06 recentsd x 5 accident

  2016 04-06 suggestd accident x 5

  Crash of Microsoft Error Reporting 2016-04-12

  2016 04-27 com.apple.WebKit.WebContent crash

  Journal

  30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

  30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

  30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

  30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

  30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

  30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

  30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

  30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

  30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

  30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

  30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

  30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

  Demons

  com Apple.Installer.osmessagetracing

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  -com.cisco.anyconnect.gui

  / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

  -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

  -com.teamviewer.teamviewer

  /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

  -com.teamviewer.desktop

  /Library/LaunchDaemons/com.Adobe.fpsaud.plist

  -com.adobe.fpsaud

  / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  -com.cisco.anyconnect.vpnagentd

  /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

  -com.cudadrive.cudadrivesvcd

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  /Library/LaunchDaemons/com.TeamViewer.helper.plist

  -com.teamviewer.Helper

  /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

  -com.teamviewer.service

  Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

  -com.citrixonline.GoToMeeting.G2MUpdate

  Beams

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  / / Library/Internet Plug-Ins/Flash Player.plugin

  S/O

  / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

  -com.google.googletalkbrowserplugin

  / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

  -com.google.o1dbrowserplugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

  -com.dell.scan.Dell2155ColorMFP.prefPanel

  / Library/PreferencePanes/Flash Player.prefPane

  -com.adobe.flashplayerpreferences

  /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

  -com.teamviewer.AuthorizationPlugin

  / Library/Widgets/Status Monitor.wdgt

  -com.dell.print.statusmonitor.widget

  Library/Address Book Plug-Ins/SkypeABDialer.bundle

  -com.skype.skypeabdialer

  Library/Address Book Plug-Ins/SkypeABSMS.bundle

  -com.skype.skypeabsms

  / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

  -com.citrixonline.mac.WebDeploymentPlugin

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Featured: indexing and search disabled

  Firewall: on

  Small files: 43

  Time elapsed (s): 272

  If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

• my laptop doesn't work well in safe mode... How do I please you? It's a laptop Dell 1520

  Please guys my laptop using windows vista premium to household use and windows is not in time on normally I can only log in safe mode... Wen he lights up normally after about 30 minutes, it remains on my desktop screen and nothing, when I click to go on the internet it wount is wrong, it does nothing I hv tried updating drivers, System Restore last good configuration to boot but nothing still, actually worse... Please I need your help...

  What I proposed is to understand what is causing the problem. If you start windows with a single process from the start, when the problem occurs, regardless of the process started would be the problem. Basically, it's a slow process of elimination. So, if by "back to what you said, I do now" you mean that you are going back to windows startup with 1 single process on the list, ranging from 1 to the time to the bottom of the list, then of course continue.

• iMac works fine with safe mode only

  iMac works fine in safe mode, but in normal mode, it freezes constantly, the wheel that turns, the freezing of the apps, and when I try to restart, it gets stuck. I have to hard reboot. I tried to reinstall the operating system, which did not help. I have reset the NVRAM, but it has not solved the problem. I came across another post in 2013, with another user who was having a similar problem. There are detailed instructions to run diagnostic tests via terminal and display the results. This seemed to fix the problems of the user, but I don't know what to do with the information it generates. I have an iMac 2009 El Capitan 10.6.11 running. Can someone help me understand what the problem is?

  Post edited by: Namaste85

  If you have any type of antivirus, cleaning or ANY other third party maintenance application installed, please find the developers instructions and uninstall. At best, these types of applications are 100% useless and at worst they cause more harm (similar to what you are experiencing) than good.

  If you don't have one of these types of applications installed, run a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• My system restore does not work even in safe mode and I can't download anything.

  Original title: Hi, one day I turned on my pc. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work.

  There was nothing but my background, then after 2 minutes my desktop icons appeared. But no start bar. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work. Help! PLeeease.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us firstly the sfc scan and check if there is any missing system file.
  Reference:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  Try the methods listed in the articles below and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
  http://support.Microsoft.com/kb/

  Method 3.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

   
  MSIExec /Unregister
   
  MSIExec/regserver

  Method 4.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• Satellite A45-S150 starts windows - safe mode is not possible

  My machine locked upward and when restarted, that asked me to make a selection among several options. Safe mode, safe mode network, prompt mode without failure, recent well known parameters and then just windows. It starts windows in these modes. Any help would be appreciated.

  Brad

  What to say Brad. It seems the full Windows XP operating system has crashed!
  Believe me, something like what is happening simply and I think that it s nothing unusual to anyone who use and works with Windows OS for a long time.

  You should definitely try to reinstall the OS from the Toshiba restore CD.
  But this procedure will format your HARD drive and you will lose all files stored on the HARD drive.

  But this is only one possibility to get Windows running on this laptop.

  Check it out buddy!

• System Restore won't work, drives available: HP (C :) (Missing)?) Left click on the mouse also stops randomly works, works fine in safe mode.

  My computer is upward, slow-running and my mouse will just randomly stop left click. I can switch the service so click right not left click function, but then cannot do the right click function. I had created a restore point before installing a program called Cain and Abel on my computer and it was just a couple of days.

  When I tried to do a restore, I got a message saying I needed turn the system restore. Then my computer froze so I restarted it and selected "System Recovery" and tried to do a restore to the point that I had created before that Cain has been installed. I got a message saying that the restoration has failed then I restarted mode without failure. When I restarted in safe mode, both left and right click was working again but I got a message saying that something has been altered (I didn't write it down so you do not know what it was). He says to run CHKDSK, which I did and then the computer seemed to work again.

  This is temporary, I lost my left click again and now have swung it for do the right click, left click is supposed to do, but really need to be able to do both types of clicks.

  I go in to the restoration of the system, and it says I need to turn it on. When I go into system properties to turn on, the disc I want to activate to says "HP (C :) (Missing)) ' what this means and how do I do the restore point I have created 2 days ago from work?

  Hi kar fam.

  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware. For more assistance, contact your computer manufacturer.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer crashes whenever I start it. Works fine in Safe Mode

  the start of vista on my computer, sometimes it freezes instantly or 10 minutes later every time I turn on but seems 2 work in safe mode, I think it's a bug or something I can't reinstall vista because I don't have a copy of what I had to do mine head melted.

  Hello

  1 have had modifications made to your computer before the problem occurred?

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

   

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• TV connected via the VGA input to HDMI don't get no signal after preparing the Windows message, works fine in safe mode

  Original title: PC to tv connection / VGA to HDMI

  Hello
  I hope someone out there can help. I recently bought a new samsung TV after that my old one failed. My new TV doesn't have a RGB port to connect a VGA cable to so I can use my PC as my old one done, it has HDMI and my PC only output VGA. I bought a VGA Converter HDMI to maplin and when I start my PC the image appears on my TV because it goes through its startup upward. It displays windows prepares, but then the Windows point would open normally, the signal on my TV dies and it does is display the message no signal on the screen. If I start thr PC in safe mode, windows starts very well and the signal does not go down. I use windows 7. Someone knows how to fix?
  Thank you

  It is possible that your computer is trying to send a resolution & frequency to which the TV cannot manage.  I suspect that this is because the image is displayed when starting, but then disappears when Windows takes control - until Windows takes over, the resolution sent will be below.

  You should consult the manual of the TV to its specifications.  Mine, for example, just a a simple table of resolutions & combinations of vertical frequency it can handle.  Then look at the Control Panel, display, change display settings to see what your computer can produce and choose one that fits these two machines.  If the best resolution display settings don't work then go to the next best resolution [or in the setting of 640 x 480 to see which works best].

  Once configured, Windows will display the setting chosen at the television screen every time so you will not have to keep setting up for each session.

  Each time that you connect the TV you can use the Windows key + P key combination to toggle the display.

  I don't know if you want the TV an extended desktop or a single view.  You might find, as I did, that the TV can use a higher resolution output if it is the only view.  I suspect that this is a result of capacity of the computer's display adapter because it has less work to do if there is only one required both display.

  Once you put in place, you may find that control panel display settings, display, change, advanced has useful additional parameters, but you'd probably need to have a good guide to help with your graphics card make any sense of the options available.

  If that is not enough then I suggest that you try to find an online forum for your TV, hoping that someone has done what you are trying to do.

  Good luck

• BlackBerry Smartphones not able to get my phone to work unless in safe mode

  There are two problems I see. Yesterday, I've updated througn Office of BB online. I have now deleted the BB 7.1.0 CoreApplications four times. When I start my phone one of the two things happening. I can enter my password, but when I hit the key enter the phone crashes and will only go to safe mode. The second thing that happens is it accepts my password, but immediately the following message - Eception Exception: Java.Lang.Error there is an option to click OK but when I get my BB freezes. I have installed and uninstalled all languages twice, I restarted a dozen times or more, I reinstalled a version more ancient dating back months and not seen no change to these questions. I can work the phone in safe mode, but this isn't a solution. I find this very frustrating. I would also like to be able to talk to a human being on this subject but can't find a number on your website. A WTF happening? I'm about to launch this phone in the tray and get an IPhone!

  Hello and welcome to the community!

  I think that you may need to perform a clean reload OS... from your post, I can't quite tell if you did that.

  Please visit this official download portal as you go along. If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. After installing the operating system on your PC package, please remember to remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  dhutchr wrote:

  I would also like to be able to talk to a human being on this subject but can't find a number on your website. A WTF happening?

  Please refer to this information, which is at the top of each page on this site:

  

  Contractually, BlackBerry cannot provide any support from first line for nothing. All support first line begins with mobile service providers, to the place of origin of purchase or an authorized service center (it varies according to the region and the specific question). When you bought your device and the services, you should have been informed about your methods of formal support... If you weren't, you need to check your place of origin of purchase or your service provider mobile as to what those who are for you.

  Good luck and let us know!

• My iMac doesn't work that in safe mode, normal mode the screen layout is really weird. Help, please! :)

  Hi guys,.

  Since yesterday my iMac 27 inches of the end 2009 has acted weird. Text was not good more visible and popupscreen were empty, white or black. (do not know why they are uploaded in reverse)

  

  Then I tried a clean install. Screen was working again fine. Then formatted my drive and installed the new OSX.

  

  Download went fine, but when installing the pop-up screens were not visible.

  

  After a few random reboots on my side, it worked again.  Thus, installation...

  But... Now, I always have the same question. In safe mode, everything works fine, but in normal mode, the screen is *. Pop - up screens are blank/black or white, the numbers are mixed, etc. What it can be.

  I already installed it on an external HARD disk, reset the SMC and the PRAM, Test hardware (message only 1 failure: 4sns/1/40000000: TH00 - 9,000.) "But I think it's because I installed my SSD later, that's why I need to use a program like HDD control to control the fan).

  so... What can be? I've tried everything! If any of you guys could help me, I would like to do a happy dance ;-)

  You have a sensor error. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  Install El Capitan from scratch

  Restart the computer. Immediately after that the chime hold down the command and R until the Apple logo appears. When the Utility Menu appears:

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) in the list to one side.
  3. Click Delete in the main window of disk utility. A panel will fall.
  4. Define the type of Format Mac OS extended (journaled).
  5. Click on the apply button, then wait for the done button to activate and click on it.
  6. Quit disk utility and re-enter the Utility Menu.
  7. Select reinstall OS X and click on the continue button.