Windows Vista hangs after choosing the identity of the connection. works well in safe mode

Similar Questions

• 64-bit Windows vista hangs after you run the update

  Hello

  Last night I ran the update of windows on my 64 bit vista laptop, he said there are 2 updates important (I don't remember what they were) and 1 optional (for security essentials).  I chose to install them all, let run updates, restarted the computer when he was asked and then pinned the problem.  Windows starts up nicely, all my startup apps pop up like normal (things like security basics, steam, etc.) and, if I don't touch it, it looks fine.  Sometimes I can get as opening firefox, sometimes just moving my mouse t - it, but the computer just hangs.  I can still move my mouse (sometimes it turns in a circle, as the computer working on something) but I can't click on anything whatsoever, cannot Ctrl + alt + delete... my only way of l ' down made a difficult start.

  I tried to use the tool of the previous version to roll back to before the update, the Wizard works well and said completing, but I still have the same question.  If I'm in safe mode or safe mode with networking, it works fine. I even tried to delete pending.xml to see if it was an update stuck but who did not (cmd said that there was no pending.xml found to remove)

  Anyone know what this might be or how to fix it?  I'm fresh out of ideas

  Hello
   
  Given that everything works well in safe mode which makes them a third-party application causes the computer to freeze.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  For more information, refer to the article below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my computer acer have windows vista Home premium and I install Grand update pak2 and remained in safe mod can somebady help me

  my computer acer have windows vista Home premium and I install Grand pak2 and hestay update in safe mod somebady can help me

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot delete mp4 in windows vista, even after changing the property.

  Hello

  I tried all the methods in the solution given in windows vista to remove off the mp4 files from destop. but each time, he said the necessary authorization.

  I had changed the security for the property for full control rights. but always impossible.

  can you please advice me how to do?

  Hi oscarpooh,

  This only happens with MP4 files?

  The following could prevent you from deleting the file.

  Ø if you do not have the adequate rights for a file or folder, you cannot remove it.

  O if not create you the file, you may not be able to delete it, even if it appears in the Public folder. If this is the case, you must ask the owner of the file to delete.

  O in addition, you cannot remove a file (or the folder that contains it) if the file is currently open in a program. Make sure that the file is not open in any program, and then try again to delete the file.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  I suggest you try the following steps:

  Ensure that you do not play the file when you try to remove it.

   

  Step 1: Start the computer in safe mode and then try to remove

  Start the computer in safe mode, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: The corruption of the file system prevents access to the file

   

  You will not be able to delete the file if the file system is damaged. To resolve this problem, run the Chkdsk utility on the disk volume to correct any errors.

  Run the disk check to repair bad sectors on the hard disk.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista hangs after the release of sleep

  I am using windows vista 32-bit edition Home premium. My laptop freezes resumed after having been dormant for a long time. The problem started after I reinstalled windows and started the update of windows.

  Hello

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Why pc does not start, and the windows logo hangs after installing the update?

  often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.

  Hello

  Method 1:

  I suggest you to use the Windows Vista disc to perform a Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2:

  If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.

  http://support.Microsoft.com/kb/934540

• Windows XP hangs after installing the new drive hard & software

  My 20 GB hard drive was almost full and the computer (Dell GX240) has been slow, I installed a new 160 GB drive. After loading Windows XP, Linksys, McAfee, MS Office and MS Windows updates would crash randomly. Restart the system would allow him to run for a few minutes and then hang again.
  I reformatted the drive and partitioned to 80 GB and then reloaded all programs above with the same results.
  I reformatted back to 20 GB, loaded XP and Linksys and the same problem occurred.
  It seems that the internet has something to do with the problem.
  Any suggestions?

  "Wingnut555" wrote in message News: 6aac2f2a-ffb6-4a22-98e1-67417709eb6b...

  The drive of 20 GB that I removed to install the largest capacity disk has been reinstalled after the failure of a larger. I am currently running on the same pc and the old drive. I have another drive of 20 GB that had XP installed on it earlier. Thinking that I might try that one that I started to load some of my other programs operating and when I installed Office 2007 for household use and selected updates online blocked system shortly after. The problem is therefore not only on new facilities. The reader that I use currently a Office 2007 is installed and it works fine.

  What is the largest disk that will handle XP? I heard it's 137 GB, is it true? If I can make it work how would you recommend I have partition the drive of 160 GB?

  Thank you

  XP can handle drives of 1 TB to NTFS without problem - it's the motherboard on computers more elders who may have problems, that it is not compatible LBA.
  There is really no need to partition the disk, but I would tend to opt for about 60 GB for the operating system and 100 GB of data and then move the folder My Documents (using the option in its properties) of the data partition. This allows to separate the data and programs and means a lot less work if a reinstall is needed.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• Windows Vista black after login screen and Explorer has stopped working error

  Hello world

  I have a very big problem. Whenever I connect to my computer that is running Windows Vista Ultimate Edition all I get is a black screen and a mouse pointer. I can use Ctrl + Alt + Del or Alt + Ctr + Shift lift the the Task Manager, and from there I can run firefox. Once in Firefox I can use the option open the file to find programs, do a right-click and then run them. But I want my back office. When I try to run Explorer from the Task Manager and then I get an error message saying it stopped and must be closed. I also keep getting an error message for something like 'Windows Search Protocol Host' or somesuch. A large part of time that this will just about a five-minute cycle in a style of window minimized down thing then the error message poopping upwards. I am also quite unable to open Control Panel or MSCONFIG. Whenever I try that they freeze and I get an error message saying that they have a problem and need to close. Also I did not change my software recently. In fact it worked fine yesterday when I was with Photoshop Elements 7.0. Another thing that can help anyone trying to find an answer that is in most of the forums help I saw people talking about going into regedit (something I CAN open it) and put the shell on explorer.exe. Mine is already set to explorer.exe. It is also something else that many videos help and forums have said I should close explorer.exe in Task Manager process tab, then run it again. I don't have an explorer.exe in the processes tab and when I try to run it I just get "WIndows Explorer has encountered a problem and needs to close."

  Please help people, I'm going nuts without a desk job.

  PS. I use the computer with the problem to type this.

  Hi, Eric D1979,.

  Glad that you've found the malware but it would be very wise to check further as there is no program can
  detect and remove any malware, and often some that is easy to find is bundled with others which are very difficult
  and later you really be touched when it is active. Better to be safe now than sorry later.

  Hello

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• After from the screen doesn't say safe mode not optimum mode recommended 1280 104 60 h

  After said that from the safe mode screen (not optimum mode recommended 1280 104 60 h)

  Help me solve this problem.

  Thank you

  It is not a Windows problem.  It is a problem with your monitor.

  Your screen has a maximum resolution... maybe note 1280 x 960 with a 60 Hz refresh.  When you start mode without fail, the resolution of the video card is forced into a mode that will support virtually any monitor (640 x 480)?.  This is done to allow recovery in case you accidentally set your screen resolution to something that is not supported and you end up with a white screen.  When your monitor detects this less-than-optimal resolution from your computer, he takes it upon himself to post a notice on the screen informing you that you will get a better screen if you adjust the display resolution on your computer to match your monitor.  Maybe it's not possible in Mode without failure, then look at your manual of the monitor and the settings to see if there is a way to disable the warning message.

  HTH,

  JW

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Firefox starts slow, but works well in safe mode with all the running addons - why?

  Then... all of a sudden my Firefox (v. 38.0.1) is really laggy, with slow-to-respond buttons, scrolling etc. So I manually disable all addons, but nothing helped. Then I try safe mode and it works very well. Large. So I turn on my addons again one by one, until they are all allowed and it still works fine. My conclusion: it isn't the addons. What is what is the cause? I have updated all my addons and just Silverlight, Flash, Google updater, Shockwave and some others.
  One solution would be for this mode - Safe with addons running - being my default start mode, but I can't work out how to do it. Is no huge problem because I can make Firefox work perfectly, but it's a little bit of your time.
  Any ideas?

  Hi RufusWalker, please see if Firefox is slow after upgrading to Firefox 38 covers and solves your problem.

• Determine the connectivity of network in safe mode problem

  In Windows 7, I am connected to my wireless but no internet network. When I start it in safe mode with network problem is resolved. The best way to understand what is causing the connectivity in normal startup problem?

  Thus, a service blocking your internet connection, in this case. It is usually a firewall. Check your internet security and your Windows Firewall settings. If this does not work, you will need to go through the process of elimination to find which blocks the internet:

  1. Click Start
  2. in the search bar, type "msconfig".
  3. in the general tab: move the bubble in 'selective startup '.
  4. "load system services" and "Load Startup items" must be verified at the moment
  5. switch to the services tab
  6. Click on the box at the bottom for "hide all microsoft services".
  7. Uncheck all options
  8. Restart
  9. see if the internet works
  10. If this is not the case, go back to the services tab and begin to get rid of microsoft services, until you find what blocks your internet connection

• How do you know if your email has been read in Windows Live Mail, after choosing the option "request receipt reading"?

  Ok. It of stupid, but how do I know if my Windows Live Mail has been read after requesting a read receipt?

  Thank you again you wonderful people!

  LindaSView

  You do not have. You ask the recipient sends the receipt for you, but they are under no obligation to do so. Send a message to yourself to see what they see.
   
   

• my password does not work on windows vista. I get the message user profile service has no logon

  My password does not work. I get the message user profile service has no logon. Help please.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K