My laptop is stuck at "Installing Update 2 of 5" and will not stop or start.
I went to close my laptop (toshiba satellite) earlier today and after several hours noticed he did not close, but was locked up in the "if it please do not turn off or unplug your machine. Installing Update 2 of 5 "with the circle"busy ". 'Ctrl alt delete' tried to get up but Task Manager no response. Power finally closed off and tried to start but same "install update" screen comes up which is locked. Tried to boot into safe mode with F8 key but used. I have no installation disc that Vista has been loaded on the machine again but I have created a recovery disk when I started the laptop because that's what he recommends. I have Vista Home premium. Help please. Thank you
Hello
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.html
You can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.
This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
Try recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html
Method 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
You can also do a restore of the system of starting with a Vista disk.
Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
x 64 64-bit.
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
My laptop is stuck on the update 3 of 3. Before it got past my Start button would not answer and I had close it via the Start button / stop. I tried to restore the system with the recovery disk and messagSystem restoration error error message is not enough quota available to process this command (0 x 80070718) Please helpeSystem error message of restoration is not enough quota available to process this command (0 x 80070718)
Hello
I suggest you to run the Startup Repair tool and check if it helps:
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
-
Gamepad Xbox 360 but not installed projection in the DM and will not work.
I installed my xbox 360 controller. It has first been installed a few months previously and showed upward in Device Manager. then I disconnected and never used until today (or so I tried)... now it does not show in the SM, but you can hear the dingding when I plug in and when I unplug the unit, but nothing happens and I can't figure out how to get my pc to recognize it again. Please help... my console real xbox 360 should be disabled so that it works, or can I use it with my pc while the console is still? Help
Hello
Here are some steps that you can try before you contact the Xbox team.
Step 1:
Connect your Xbox 360 to the computer power turn it on and restart the computer to see if it is recognized by your computer.
Step 2:
Try to run Windows update on your computer, if there are drivers available, they will be installed and could help recognzing Xbox on your computer.
Step 3:
Check to see if you can recognize the device through other USB ports on your computer.
For more information, see the article below.
Also post your request in the Xbox forums.
Concerning
Anthony -
Stuck in the dock icon. The system will not stop?
After the Java Update 1.8.91, whenever a Java application had been opened and closed again, the Java icon remains on the bench of the accused.
This isn't the real problem, stop via the Apple menu does nothing. The iMac not simply stopped. OS X 10.11.5. It is somehow in an intermediate state, where no other application opens more.
Here's what I've tried so far:
- Force quit changes logo from Java to a Terminal logo = > icon remains docked, without stop down via the Apple menu.
- By dragging the icon Java/Terminal to the desktop or the trash can displays the text "Remove", but won't actually remove the icon. Needless to say: stop always is not possible.
- Since the iMac is set up for multiple users, I can change via the user menu in the login window, and here I can click on the icon/symbol of closure. After you enter the credentials of the administrator, the system stops... Finally.
- I have already completely uninstalled and reinstalled the latest version of Java (1.8.91). No change.
- The strange thing is, there is no Java process visible in the activity monitor or in the Terminal window when you use the top or ps commands...
- Disk utility = > first aid doesn't change anything either.
- In the console is a warning against a coreaudio with Java incompatibility... But I don't know how it might help the situation.
I have no idea process to kill or what to install/uninstall in order to launch a 'clean' close.
Advice or assistance is highly appreciated.
Thank you.
The software for a Wacom tablet is known to prevent the shutdown of OS X 10.11.5. If this software is installed and that you no longer use the device, please remove the software. Otherwise, check with the manufacturer for support or an update. Back up all data before making any changes.
-
Windows xp has not updated for two months and will not open internet explore.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: who can I cotact to solve this problem?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Windows XP Edition with Service Pack _ _, _ - bit?(Fill in the blanks).Antivirus solution that you use now and all the others that have already been installed on the system to your knowledge (including trial versions)?Why you waited two months? What you have tried in these two months?I'm guessing that you have Firefox or an alternative browser?Assuming Windows XP with Service Pack 2 or higher * and * 32-bit...Please check * exactly * what you have:AutoScan--> RUN (no 'RUN', press the Windows_Key + R at the same time)--> type:
winver
--> Click OK.
This will give you (top photo) the full name of the operating system.
This will give you (in the text) the Service Pack you have installed.
How to determine whether a computer is running a 32-bit version or 64-bit
version of the Windows operating system
http://support.Microsoft.com/kb/827218Please post your results here in response to this message.If you have Windows XP (any edition) 32-bit at least SP2 already installed (SP3 is preferable) and then continue on after the posting of the above requested information...Restart, and then log on as a user with administrative privileges.Difficulty your file or registry permissions...
Ignore the title and follow the subsection under
"Advanced Troubleshooting", titled,
"Method 1: reset the registry and the file permissions.
http://support.Microsoft.com/kb/949377
* will take time
* Skip the last step (6) - you * should * have SP3 now.But if you do not, we are not only fixing right now.You may see errors go even if you watch, count upwards. NO.
worries at the moment.Restart, and then log on as a user with administrative privileges.Download, install, execute, update and perform a full scan with the following
(freeware version):SuperAntiSpyware
http://www.SUPERAntiSpyware.com/Restart, and then log on as an administrative user.
Download, install, execute, update and perform a full scan with the following
(freeware version):MalwareBytes
http://www.Malwarebytes.com/Restart, and then log on as an administrative user.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspxYou find nothing, you will only find cookies, you may think that it is a
waste of time - but if do you these things and report back here with what you
/ don't think you do all that - you add more parts to
the puzzle and all of the picture just may become clearer and your
problem solved.Restart, and then log on as an administrative user.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enRestart, and then log on as an administrative user.
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your drive C:\. After you have saved in the
root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
THEN--> when it completed the installation, click "Finish"...Restart, and then log on as an administrative user.
Visit this web page:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058... and click on the "Microsoft Fix it." When asked, select "RUN."
both times. Check the box "I agree" and click "next". Select the check box
to "Run the aggressive options (not recommended)" and click "next". Let
He finish and follow the instructions until it does. Close/exit and
reset when it is.You should now perform a full CHKDSK on your system drive (C :)...)How to scan your disks for errors
http://support.Microsoft.com/kb/315265
* will take time and a rebootYou should now perform a full defragmentation on your system drive (C :)...)
How to defragment your hard drives
http://support.Microsoft.com/kb/314848
* will take timeReboot again.Log in as a user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to make a
CUSTOM scan...Whenever you are about to click on something in these pages - web
first of all, press on and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking on each time.Once the scan is complete, select that ONLY updates of high priority
(deselect all others) and install it.Reboot again.
If it worked - try the web page - selection not more than 3-5 a
time. Reboot as needed.The optional software updates are generally safe - although I recommend
against the 'Windows Search' one and all of the "Office Live" those or
"Windows Live" which for the moment. I would like to avoid completely the
Optional hardware updates.Seriously - do these things. It's like antibiotics - do not skip a single
step, don't leave because you think it will be ok now - review
until the end, until you have done all given in the order shown. If
you have a problem with a step to ask and let someone here, you get
Thanks to this step. If you do not understand how to bring one back
and ask here on this step and let someone guide you through it.Then - actually - that everyone here knows if it worked for you - or if
you have more questions.
--
Martin Stanley
MS - MVP
--
How to ask Questions the Smart way
http://www.CatB.org/~ESR/FAQs/smart-questions.html -
Hello
Today, I installed a new HP 564 Black XL cartridge in my Photosmart 5220 according to the instructions.
Since then, I cannot print in black and white and the pages come out blank.
Can anyone suggest how to fix this?
Thanks in advance
The document here can help solve the black does not print on your Photosmart 5520. Be sure to check the vents, as on the three solution.
-
Stuck on installing update 1 of 14
I'm trying to stop my netbook, and it was stuck on installing update 1 of 14 for well over an hour.
Hi Scouty7,
1. perform the updates always installation?
2 you cannot stop the laptop?
3. do you get an error at startup of the system?Given the many updates installed on the computer, it is recommended to wait for the updates are installed successfully. Force reboot or stopping manually in the middle of the installation of updates can cause system start to fail.
If you encounter problems starting system, then follow method 1 or method 2 of this article:http://support.microsoft.com/kb/949358
We recommend that you send us the current state of the computer, so that we can help you further.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Install updates, when I restart all my apps stopped working the laptop?
I had turn automatic updates off the coast of more than 6 months because of complications with an installed update, after it installed I turned on my laptop and view error started to appear for all! Internet Explorer had stopped working, msn direct ceased to adobe flash player had stopped the list goes! I don't know yet so far is that I had a few ready to install, I had to do a system restore to use my laptop properly! Any ideas on wht, has happened and what I can do about it, I have currently 70 updates waiting to be installed, I need this sorting asap! all ideas welcome
Hi kises2539,
Method 1:
1. download the stand-alone package with four updates at a time. You can download the stand-alone version of the link with the number of KB below:http://www.microsoft.com/downloads and check if the problem is resolved.
2. start the clean boot computer and try to install the updates manually. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135
Make sure that you reset the computer in normal mode (you can see step 7)
Method 2: you can also run the built-in convenience store, check out the link below: open the Windows Update troubleshooting tool:http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My "Installing Update" bar is stuck and frozen at 0% and will not do anything else. Can anyone help? For about an hour.
Hi Nathrotep,
Close all processes mentioned below, re-launch creative cloud and share the results.
- CreativeCloud
- Adobe CEF Helper"
- Service Office of Adobe
- AdobeIPCBroker
- Creative cloud
- Installation of Adobe
- AdobeUpdateDaemon
- AdobeServiceInstaller
- AAM Update notify
- CCLibrary
- node
- The basic clock
@KateGee, error code, try 201: troubleshoot Adobe Creative cloud download, install and update questions
-
I get error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661 and am invited to re - download the updates (which aren't yet.) Help, please.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows wants to install updates for Office 2002 and Office XP and I have VISTA and Office 2007
I have read many topics and I can't seem to find the same problem I have. I use Windows VISTA Home Premium (32 bit) for awhile and since June 30, 2009, I had bad download and install Windows updates. I installed updates today, but I continue to be invited to run/install updates for Office XP and Office 2002 (currently about 9). I used VISTA and Office 2007 for some time. I believe that I have IE 7 and SP2. I appreciate any help I can get to fix this. Thanks in advance for your help.
Hello SKYisDlimit,
After my communication to you, I continued to the Internet using the search. I was finally able to locate the file you suggested (Msmapi\1033) he successfully Office Pro 2003 Outlook running. Thank you!!
I don't know if you're alone in asking the question following or not, but I'm still able to re - install Microsoft Office Professional 2007. I uninstalled after information I received of Santosh, and it has the re - install Office Pro 2003 (which have been upgraded). Now when I try to reinstall 2007 (bought in February 2007), I keep getting the following message: "Setup is unable to find a version of Microsoft Office on your computer. If Office is installed on a disk or a network share, click the buttun browse to select the appropriate disk or sharing. If you have a version of MB on a CD, insert the CD into your CD-ROM drive, and then click the Browse button to select the appropriate drive. »
I tried several times without success. Of course, I use Office 2003 Pro, so it's on the computer. If you are unable to solve this problem, please either direct to the appropriate area or tell me who I need to contact. Once again, thank you in advance for your help. Needless to say, it's more frustrating!
Katydid2
-
Laptop will not stop after update to 8.1 windows
I have a new aspire E1 - 572G that will not stop completely during a windows 8.1 update
I updated the Bios and downloaded the drivers from the support site.
I did a restore to factory default settings and tried... again no luck
I installed windows 8.1 after installing the updates for windows al.
I'm not left how to solve this problem!
Any suggetions are welkom.
Found! Why are there two displayadapters in this notebook?
I removed the intel one and rebooted. Windows dectected the displayadapter of intel again... problem solved!
-
I am running microsoft updates and one update for windows xp (KB2641690 will not install)
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/822798
It will be useful.
-
Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020
Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.
KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.
-
My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)
The link below has options to solve your problem of loop.
http://support.Microsoft.com/kb/949358>
06/15 / 1104:36: 37 pm
Maybe you are looking for
-
Windows 7 - is possible to run telnet via the LINE of COMMAND BACK?
I activated the Control Panel - programs - telnet client activate Windows features turn on or off - and a check by the Telnet client. I CAN run telnet from the Start button and typing telent. Telnet.exe is located and I click on it, and a telnet wi
-
Windows 7 is only 764 GB of an alloccatable of USB 3 TB drive
Windows 7 SP1 running on a processor motherboard and Intel DZ77BH i7 - 55 k. You want to add a 3 TB for backup drive. Disk Manager provides only a GUID of 764 GB partition. What should I do to see the full disc?
-
Hi, I'm trying to compile a special version of sqlite and I ran into a wall near the end apparently CQS does not recognize ones libtool files. SQLite3. Lo: file not recognized: file format not recognized This is what the file looks like # sqlite3.lo
-
HP psc 1315 all-in-one driver download problem?
Hello.. I tried for 2 days to download the driver HP 1315 all in one for windows 7 (64-bit)... downloading begins... a full 99%... and he tells me there's one second left... and then it stops the download... in other words... the download never reach
-
APEX 5.0 - Position Navigation menu (top / side)
HelloI use the universal theme (42) in APEX 5.0 and I have a list of said NavigationList1 - this list consist say consist of a list entry 3Home - no parent - target - 1 pageChild - Parent (home) - target - 2 pagePage big child - Parent (child) - targ