Windows 7 is only 764 GB of an alloccatable of USB 3 TB drive

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?

  My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?... the titles of the first and the last burn, but the tracks between say ERROR OCCURRED, it was working perfectly last night!

  original title: Windows Media Player does not burn!

  Hello

  1. What is the exact error message you get during combustion?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: Run the Fixit and see if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2: perform the steps mentioned below and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Click on the link mentioned below as reference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope this information helps.

• Windows 7 saves only me as a temporary user. Cannot connect as an administrator.

  OT: Windows 7 connect.

  Windows 7 saves only me as a temporary user. Cannot connect as an administrator.

  Hello

  See if that helps you.

  Before that the problem, perform a restore of the system in Mode safe for:

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Enter the Mode Windows safe. Use the arrow keys to navigate and the ENTER key to select Mode

  http://www.computerhope.com/issues/chsafe.htm#03

  ________________________________________________________

  " How to fix the error "your user profile was not loaded correctly! You have been logged on with a temporary profile. "in Vista and Windows 7"

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  This can also help you:

  'Fix a corrupted user profile' in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  See you soon.

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• Taskbar Windows parade with only two visible icons

  How can I change this?

  It makes it slower find my open programs and Favorites.

  Help, please.

  AW

  Original title: taskbar Windows parade with only two icons visible instead of a horizontal line which shows all the...

  Who has not worked for me under Windows 7.  I found that unlocking the taskbar, and then double-click the two dotted vertical lines closely grouped to the immediate right of the star button, I was able to disable scrolling.

• By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.

  By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.  1 program, all the others still work ok.

  This option is used to work, I installed a viewer of this program option (it's a based CAD program) and after that I uninstalled the viewer that he would not even start the program, he was trying to launch the viewr.  I noticed that the file association was still for the Viewer so I changed it back, but he now throws only program.  Under right click, properties, file Type: it is said the extension only where it used to say the name of the program.

  Thank you

  Sam

  Hey Sam,

  Default configuration program.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  If this does not work, then contact the Help Viewer support.

  All the best!

• my windows box works only in normal mode, cannot run in safe mode.

  my windows box works only in normal mode, cannot run in safe mode, in the fourth stamp corner with 'safe mode '. And when the loading starts there is a note: "3 processor system, multiprocessor kernel". When I run the Action Center in reliability monitor there is a note: "DefaultTabSearch.exe stop working. And when I check in the user account, in the tab - configure advanced user profile properties, there are 3 users: '1 default pofile (1.63 MB)' - "2nd computername\NameFileFolder (20.6 GB)" and "3rd computer name\updatus (58, 2MB)» Please give solutuion for this problem.

  I tried to restart and press F8 and already choose all the list of options, and the result is noting changed.

  Hello

  1 did you change on your computer before this problem?

  2 have you tried to run the Startup Repair tool? If so, what was the result? For more information, refer to this link: Startup Repair: frequently asked questions

  As you're able to boot in safe mode, you can restore the system back to its previous state when it was working fine:

  a. click Start, type system restore in the Search box and then in the list click on the system restore program.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  
  Reference: System Restore: frequently asked questions

  Hope the information is useful.

• No USB 2.0 driver available for HP p7-1254 (for the installation of Windows 7)

  P7-1254 HP Desktop
  Windows 7 Edition Home Premium 64-bit

  I replaced my hard drive and do a clean installation of Windows 7.
  I already found the drivers from hp.com site, and I am familiar with the order and the process of installing the driver on this machine.

  My problem is; HP seems to offer is more USB 2.0 for downloading drivers.

  USB 3.0 drivers are all that is available for the HP p7-1254.

  So I have two questions:

  1. can I install only the drivers USB 3.0 on a Windows 7 computer, and wait for my USB 2.0 devices to work?

  2. in the case, where can I download drivers USB 2.0 for this machine?

  Thank you in advance for any help or advice you offer.

  Hello:

  Windows 7 has the USB 2 drivers included with the operating system.

  USB3 drivers will only install the drivers for the 3 USB ports.

  You must install the amd chipset driver and restart the computer before installing other drivers.

• Location of the bookmarks on an old hardrive that is not Windows, running but the old hard disk files are accessed through another hard drive.

  The old hard disk does not run Windows, so access to the usual file through Windows Explorer or Firefox has not worked for me. The old hard drive is now a slave drive and all files are intact and accessible via the new Windows 7 64-bit operating system.

  You have Windows configured to display the hidden files and folders? If not, do it as soon as the first. http://Windows.Microsoft.com/en-us/Windows/show-hidden-files#show-hidden-files=Windows-7

  Then, what version of Windows do you have on the old drive? Your profile folder must be on the way there:

  Windows XP and earlier versions:

  \Documents and Settings\username\Application Data\Mozilla\Firefox\Profiles
  

  Windows Vista and later:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles
  

  If you find multiple profile folders, see the recent order. You find a subfolder named bookmarkbackups. This article describes how to restore the .json files, you will find: restore bookmarks from a backup or move them to another computer.

  A little luck?

• Windows 8 and USB external hard drives

  I want a new dv7 with Windows 8 and an Iomega Prestige 1 TB external hard drive I use successfully on Windows XP, Windows Vista and Windows 7 systems. It behaves erratically in Windows 8. Sometimes it is not recognized at all. Sometimes it is, but trying to access it via Explorer, Windows crashes requiring a diet forced down. Other times, you can access it with success and even copy a file to it with Solution Explorer, but if you try to copy multiple files with the same drag and drop, it displays the calculation time to copy file window, but the calculation done so forever, just stays there. Also, when you try an Xcopy in the prompt with mutiple files and / or files, copy the first file he is suspended from the command window. The system has a newly updated BIOS and all installed Windows updates. Ideas?

  Tried moving the Iomega for a USB 3.0 drive (the drive is 3.0 and 2.0 compatible) 2.0 in Windows 8 port and it now works fine. No idea whether the problem with USB 3.0 with Windows 8, HP or Iomega.

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• HP 15-g049au: USB Serial Controller Driver for windows 7 64 bit

  USB Serial Controller Driver for hp 15-g049au windows 7 64-bit

  Hello

  Install the drivers for the Chipset on the following link and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%208.1%20-%2032

  Kind regards

  DP - K