My laptop just starts correctly.

Similar Questions

• How can I get my laptop to start correctly?

  Recently, I started having trouble with the download of Windows 8.1 to 10 after that my laptop (Asus s200e) was sent to repair a year ago.

  Even without the necessary update my phone played very well, but soon he began to increase his start time and then it started to freeze whenever I opened applications such as Microsoft word, while the other was opened. A few days ago I turned on my laptop, it said 'prepare auto repair' and took me to a blue screen named "recovery" and below, he says "your PC could not start properly an IO error occurred, error 0xc00000e9 code.» He then listed the opportunity to try to start again or go to start settings. After constantly supported on enter to try to start again, I searched online for methods that I could do to get my laptop starts properly.

  Although most of the methods I've seen required me to have access to my login screen:

  One of the options I received was "activate safe mode" which took me to a blue screen that says «code error 0xc000021a.» The other option was to "activate the mode safe mode with command prompt" which just brought me back to my home screen. I waited for about two hours and without seeing a change, I turned off my laptop.

  I just wanted to know if there were other ways to get my laptop to start correctly

  Recently, I started having trouble with the download of Windows 8.1 to 10 after that my laptop (Asus s200e) was sent to repair a year ago.

  IMPORTANT! -Online support for Windows 8 ended Tuesday, January 12, 2016.

  Your computer Windows 8 should NOT be connected to the internet or local area network for long periods (i.e. over a minute) or two in its current state. All business & personal data (including passwords online banking & credit) must be considered at risk, if not already compromised.

  Note: while the Win10 free upgrade offer ended on July 29, 2016, you can always go to Win10 - but not for free.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Assuming Win8 64-bit...

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote this message:

  1. when (date about) have you buy the ASUS computer?

  1B., why the computer had to be repaired about a year, making repairs, and what did do to fix it (for example, replace the HARD drive or do a clean install of Win8)?

  1 c. A Windows 8 or 8.1 of Windows installed when the computer was sent for repair a year ago?

  1 d. Windows 10 has never been installed on the computer, is that correct?

  2. What is the full name of your application or the third currently installed antivirus security suite (i.e., not Windows Defender!), if any, and when (date about) is your subscription current expires?

  3. what applications third-party a-squared (that is, not Windows Defender!) are installed, if any?  What third-party firewall, if any?

  4A give Norton or McAfee application ALREADY installed on the computer since you bought it?

  5. do you have a Norton free trial, or a free trial of McAfee [a] come preinstalled on the computer ASUS When you bought it? (No matter if you have never used or activated).

  6a. is KB3124275, KB3124001, KB3121918, KB3109560, KB3110329, KB3121461, or KB3121212 listed in installed updates (not updated story)? [1]

  6B. what the KB2917499 or the KB2871389?

  7. What number of Update Version & KB are displayed in the second line of text using IE10 | [Alt + H + A] tab. for example, Updated Version: 10.0.54 (KB1231231) ?

  8. is Adobe Flash Player v20.0.0.272 [sic] installed? TEST HERE USING INTERNET EXPLORER or EDGE ONLY! -online http://www.adobe.com/software/flash/about/

  9 is Firefox version 48 (or higher) or Google Chrome version 52.0.2743.116 (or higher) or another alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  =====================================================
  [1] Control Panel | Programs and features. See installed updates (in the left menu)

• How the hell a toolbar? I just started to use Firefox on my laptop and I don't yet have the hang of it!

  I just started to use Firefox on my laptop and I don't yet have the hang of it!

  See:

  • https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons#w_how-to-disable-extensions0-personassf-and-plugins

• I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I played around the waist ut still not put the page to display properly

  The time has come to show us the code. It is best done by providing a link to the site, if you could post the HTML code and CSS here for us to have a look on.

  What you did until now, is an image that is limited in its container, a container that is much narrower than the width you are aiming for.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• I've just updated my CC Apps and Noah l get the following when you try to start Dreamweaver: the application failed to start correctly (0xc000007b). Click OK to close the application.  Help!

  The application was unable to start correctly (0xc000007b). Click OK to close the application.  Help!

  Please see:

  Flash.exe & Dreamweaver.exe error 0xc000007b

  How to repair (0xc000007b) error easily for all the works of Windows 7/8/8.1/10 (resolved) - YouTube

  I hope this helps.

  Concerning

  Megha Rawat

• Satellite Pro A10: after 3 years now just started closing

  Hello

  Can someone help with this problem?
  I've had my Pro A10 sitting about 3 years now and it has just started to close.
  I had the fan replaced and cleaning of the unit.
  In power options, I put the CPU to the minimum speed and max cooling.

  Someone at - it any other suggestions.

  See you soon

  All you did was just to prevent overheating of the laptop.
  After 3 years of dust and debris could prevent the cooling modules work correctly

  So after laptop all cleaning should work and the laptop does not overheat.

  Maybe a new thermal paste between the CPU and the cooling module could help reduce the heat from the CPU.

  In addition, don't forget that there is enough free space around the laptop for the circulation of air correctly

• Satellite M40-129 BSOD and does not start correctly

  Hi again.

  I was working on my computer since my last question, but (almost) nothing has changed.
  The problem:
  My laptop is booting, but only on very rare occasions.
  What can happen:
  -l' screen stays black (almost 50% of cases)
  -L' splash screen (Toshiba - in touch with tomorrow) becomes visible and nothing happens then (40%)
  -Notepad starts "correctly" (10%)

  If the notebook starts correctly there are 2 options:
  1st: I try to start Windows: it crashes with a blue screen with the nice request an update of the BIOS.
  2nd: I boot SuSe Linux: EVERYTHING WORKS!

  I tried to update the BIOS the traditional way, although it is difficult to get it started it runs until shortly before the end and restart the computer.
  I don't see any confirmation screen as Im used to.

  What I assume, that the associated BIOS startup problem.

  I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  My question is: is this also possible with a CD (have no floppy drive), if yes: how to proceed?

  I wanted to give a point of service of Toshiba, but if they can't fix it, I always have to pay 50 euros. I have to pay money to get my BIOS restored, but the service seems to be just a "-delivery service" the real point of service and I would like to speak with a qualified person, first :)

  > I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  > My question is: is it possible with a CD (have no floppy drive), if yes: how to proceed?

  Hmm, you said that you have already received the traditional BIOS files from the ASP in your country. Then maybe you should take a look at this Toshiba document:

  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

• The application failed to start correctly (0xc000007b error) click on Ok to close the application

  Error 0xc000007b when access to the game.

  I have a new laptop with windows 8 pro 64 bit OEM games

  I installed directx, C++, enabled Net Framework of windows features to play the souls and similar stuff

  each of these programs is updated, I need for speed most wanted 2 and Fary Cry 3 and I have installed on my computer properly

  Now when I try to run the game it gives this error again n again. I am tired, put it back, with compatibility mode does not change, I checked my anti-virus and firewall if they use shields to block some people, said that the application tries to load another bad dll files say that it's a 32 and a matter of 64-bit well honestly, I don't know what to do my friend has the same operating system windows 8 pro and everything works fine with it , I was hoping that you help me to find a way to solve the problem and try to properly load NFS and FAR CRY 3. This is the error

  NFS.exe - Application error (the application was unable to start correctly (0xc000007b). Click OK to close the application.)

  and I thank you.

  My laptop Specs are

  HP laptop pavilion g6 Core i5 2.50 Ghz 3rd generation, 4 GB ram, 500 GB HDD, ATI HD 7000 graphic card series 2 Gb GDDR5

  Kindly solve my problem, I'll be very grateful

  (new method also microsoft don't know)

  guys I have a solution to error 0xc000007b.
  you just just to

  1: Download "msvcr100.dll" in 32 bits.

  http://download.dll-files.com/0e37fbfa79d349d672456923ec5fbbe3/msvcr100.zip?0XEjQGdGiV

  2: stick to
  C:\Windows\System32 (Windows XP, Vista, 7, win 8)
  If you use a 64-bit version of Windows, you also need to place the .dll file in
  C:\Windows\SysWOW64\

  3: done

  If you have 64-bit windows then no problem you just download "msvcr100.dll" in 32 bit 64 bit not only then stick two directories mentioned above.

  Thankx

  (Sorry for my BAD ENGLISH)

• Satellite C600 does not start correctly

  I seem to have committed the cardinal sin of being too eager on the initial commissioning. I had 4g RAM installed at purchase (yesterday).
  At startup, I selected Windows 64-bit and sat down to wait for the entire boot process to happen.

  I got the message "Recover files", but after 2 hours, nothing was.
  The progress bar had not moved and he had no hard disk activity. I hit 'Cancel' and turns off the machine.

  Now, he's not beyond commissioning before giving me an error message.
  I was too impatient?

  I can't recover from this?

  Hello

  You have upgraded the RAM and since the laptop start correctly?
  Have you tested if the laptop could properly initialize without the new inserted RAM?
  Please check this because I think the issues is related to the new RAM and probably the phone should start without the new RAM modules.

• Satellite Pro M70 cannot be started correctly

  Laptop will not start correctly. a failure message
  Could you please help me?

  Could you please be more specific? What laptop you use?
  What is happening exactly! ??

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Flow: Not started correctly

  My phone ran into a cycle and does not start. He goes along and always ends the automatic repair screen with the message "your PC is not started correctly.

  Hey @elmarcano,

  Before I provide documentation for troubleshooting that you can use, I would like to take a moment to welcome you to the HP support community!

  Note: Make sure that the AC adapter cable is not plugged into a power strip, surge arrester, or secondary power source. It should be directly into a wall outlet. Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You have beep codes or flashing LEDs?

  If you have no flashing caps lock Num or Num Lock LED, how many times it flashes in each interval?

  Did you do a BIOS reset?

  Have you tried to do a hard reset?

  If the computer is turned on, you hear the fan running?

  If the computer is on, but the screen remains blank, please see computer starts up but screen remains blank.

  Do you have the recovery disks?

  You also mentioned that you see, "Your PC is not started correctly". You can try to repair your laptop by a refresh:

  • Click on Advanced Options
  • Click on solve problems
  • Click on reset this PC
  • Click on keep files

  Once done, please see if you can get into your operating system. If this isn't the case, you can only solve the problem by performing a recovery of the system, which can, unfortunately, erase your data. This YouTube video can show you the steps of troubleshooting involved.

  Please NOTE: you may lose your files on your laptop. The copy of files from command line option may not work for you when reloading the operating system.

  If you need assistance, I would be more than happy to help! Please let me know the detailed answers/results of troubleshooting above. If this answer resolvesyour issues, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution at the bottom of this post.

  To simply say thank you, please click the Thumbs up below!

  Thanks for joining the community of support HP!

  Have a great day!

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James