my laptop loses connection and connect again when I restart the computer, nobody knows what might be the cause. It remains still connected locally

Similar Questions

• Laptop shuts off and turns on when I close the lid

  Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

  Hi Biliou,

  Welcome to the Forums of HP Support!

  If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

  I hope that this helps, please let me know how it goes.

  Thank you and have a great day!

• I put an update on only a few minutes ago and got this when I restarted the browser:

  Thank you for downloading Firefox, but this version is obsolete. Unfortunately, your operating system is not compatible with the most recent, Firefox more, but we encourage you to download the latest version which is compatible to the place. I have Firefox 3.6.25 and he said something about Firefox 4 but it was just an update for Firefox 3.

  Oh they did that with the various 3.6. * What's new page for a while now.

  This is the page for Firefox 9.0.1 (was just a version quick chemspill to 9.0)
  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

• How can I remove the error "Please connect to internet and try again" when I run Acrobat DC in my laptop?

  I started DC Acrobat in my laptop, he said, "Please connect to internet and try again." I got the internet connection that I could surf the net. So I checked the internet time and it is in sync with time.windows.com.

  Should I set up to sync with time.nist.gov?

  

  Hi stephenn9960323,

  In light of this error, I suggest you to please go to the following of the KB doc link and try the troubleshooting steps:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Let me know if it helps.

  Kind regards

  Ana Maria

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  Open a high command prompt, and then type these commands:

  NET user "user %%nom" | more

  (to check when you change changed your password)

  NET user "user %%nom" 123456

  (to change your password to 123456)

  Now, restart Windows and check if the problem persists.

• How can I stop my tool feather connect over and over again, whenever I move the pen?

  How can I stop my tool feather connect over and over again, whenever I move the pen? It has a line that lags behind him all the moves I do and its boring.

  'S called it rubberband. Disable it in preferences.

• Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

  Hello

  last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

  the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

  and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

  hchentanshankar,

  Welcome to the community.

  I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

  I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

  If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

  I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

  Please let me know what you find.

  TB

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Since one or two weeks, the docking station settings are not saved. When I restart the computer, the dock is not finished because he was and is located at the bottom and not left

  The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).

  In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.

  The apple logo reboot and empty the trash.

• When I restart my computer stop it crashes and I have to manually turn off

  When I restart my computer, it freezes and won't until you restart.  I have to manually turn the

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• What is optimizer pro? He educated when I restart my computer. Di I need to delete? and how?

  What is optimizer pro? He educated when I restart my computer. Di I need to delete? and how?

  I've tried everything mentioned... and then they gave me this site worked for me

  http://malwaretips.com/blogs/PC-Optimizer-Pro-virus/

  and then I followed other downloads from this site for example ADWCLEANER

  Once he was done, I got scared when my computer had no icons, it was totally empty except for my desktop picture... I hit CTRL/ALT/DEL (all at once)... then disconnected and reconnected and it was fine

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?