my laptop screen is divided into 4 identical parts whenever I restart. Why?

Similar Questions

• The screen is divided into 4

  Hi, can anyone help?
  Suddenly, my screen is divided into 4, which means there are now 4 miniature versions of everything I do. Everybody met it before and there at - it a way to back to normal?
  Thank you very much.

  Hi, Luce,.

  Right now this looks like a harware problem - probably your video card or monitor. First of all lets check to make sure that it is not not a parameter.

  1.), right click on your desktop and click Customize. Then go to display settings. In this window, set your resolution to a lower setting by moving the slider to the left.

  2.) If you have a trial office, have disconnected and reconnected the connection to the monitor. If that does nothing, try connecting a different monitor and make sure you use another cable. If this does not work, you must have a tech look at your video card.

  Thank you, Jeremy M - Support Engineer

• Satellite C855-1QC screen is divided into two parts after the mode 'sleep'

  Hi guys,.

  I have the following problem. When I put my C855 1QC Satellite in sleep mode (sometimes also after a reboot). The logo at the beginning, when the system back to the top is fine, but the home screen becomes divided vertically into two parts. Good content is there, but flashes on the display.

  I've found a workaround: I open a session, press Fn + F4 and click on dual screen. A normal screen appears, but does not cover the full size of the actual display. Then I click Fn + F4 and return to the initial display again and all is well. It's really annoying, so any suggestion is welcome. Oh, BTW my OS is 64-bit Wk8.

  Second question relates to the brightness of the screen. I can't find a way how the brightness to adjust automatically according to the ambient light conditions.

  Third and last one relates to the Radeon VGA, config tool at the launch said, there is nothing to configure.

  Thanks for your suggestions,

  Martin

  Hi Martin

  Described display problem is definitely not normal so I would know since when have you noticed it. I put t know what can be the reason for this, but I can't imagine there is a simple trick to fix this, so I recommend you to reinstall the OS using recovery media and test with the factory settings.
  It will be interesting to know if the same thing will happen again and again.
  In general all the drivers are included in the recovery image are tested and I can't imagine display driver may be responsible for this. Try please test with the pos and comments factory settings.
  > I can't find a way how the brightness to adjust automatically according to the ambient light conditions.
  As much as I know something like this is not automatically due to lack of light sensor. The display brightness must be changed manually.

• Compaq dv6000 - screen divided into 4

  Compaq DV6000 with processor intel core duo and 950 GMA intel card, whenever I start the computer, as soon as it starts, the screen is divided into 4 identical screens, and remains in the same way even after check-in. on vista home premium, looked at the properties to all the graphics, portable restored to factory settings, still problem persists. interesting, however, that display the same laptop to display extended is fine.

  Picture attached in the following post: http://forum.notebookreview.com/hp-compaq/690743-hp-dv6000-screen-split-into-4-please-help.html

  Help, please!

  Thanks for the p/n

  This means that the problem is hardware related. An integrated video chip of your laptop system board has problems.

  If your laptop is still under warranty that HP can be replaced under warranty. Check the status of the guarantee

  You should also check to see if your laptop battery falls under the recall program

  If is no longer in warranty, you need to decide when you replace the motherboard of the laptop or possibly having sewn video chip (it is cheaper) is worth the expense. There are online companies who specialize in this type of repair.

  What are the chipset and the video chip to the system board from your laptop?

  Use CPU-z and GPU-z at the end of this information.

• HP envy m6: display divided into 4 parts

  my laptop screen is divided into 4 parts and everything works fine what to do help me...

  for this reason the letters on the screen are stretched and color changed as little...

  whether the display problem or a driver problem?

  @JohnClintonD,

  Hello and thanks for the display on the HP support forums.  You have a virus or malware.

  Here are some links that can help you.

  HP computers - solve and protection against viruses on your computer (Windows 8)

  Spyware, Adware and browser hijacking software

  HP computers - using Windows Defender to prevent viruses and software spies problems in Windows 8

  So, this site is good for taking care of malware.

  Malwarebytes

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Satellite C660 - 2 EV screen divided into three sections

  Hi, please someone can help me?

  My Satellite C660 - 2 EV has developed a display problem where the screen is divided into three equal sections or parts, with the section of the Middle standing in the middle of the screen, but the left side is now on the right side of the screen and the right side is now on the left.

  Ive searched the forums and found nothing on the Toshiba site, which just closed, but found that many sites say that it could be a hardware failure, with either the graphics card or the Ribbon that feeds on the screen that runs through the hinges.

  Can anyone plaese shed some light on this?

  > found many sites say that it could be a hardware failure, with either the graphics card or the Ribbon that feeds on the screen that runs through the hinges.

  The same question is displayed on the external screen/monitor?
  If so, this means that your graphics card chip (maybe the motherboard) is the troublemaker.

• HP Pavilion e17 - 148 ca: [URGENT] need response on the laptop screen went blank question

  Hello there, this is the Prince of the heavenly Crown of Canada here.

  I've been a loyal user of HP consumer level laptop for 2 years.

  It seems that there is a problem with my laptop screen display.

  For my part, this is the first time this kind of problem has occurred.

  For some reason, in my current (well, now its my last) session, my screen became totally blank on me and turned black, as if the laptop was in a sort out of power status, however, the power of the laptop was always and until the issue has suddenly decided to occur before my eyes , I had been using the laptop and was even working on a coding operating... some of you may know me as the creator of the heavenly System.ini Crown Configuration file.

  Apparently, it is a known issue with HP Laptop, and I don't know if HP is actively focusing on the question of setting so that it does not become an inconvenience to other users of HP laptops or buyers.

  Is there a known solution as to how to fix this kind of problem? This is very critical and I was in the middle of the tent to save the rest of my code in Notepad on my desk, but I would speculate that asides from the 2 files I could save, the rest would have gone unless I would be able to resume my last session which I highly doubt at this stage.

  If someone could please let me know as soon as possible, I would appreciate it a lot.

  ~ CCPOC Benson Lam

  Hi there @BensonLam,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the black screen. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  Here are a few documents to help.

  Black screen or white with a blinking cursor after entering the Windows password

  Computer starts but the screen stays white

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion dv6: screen divided into 4

  Please, the machine restarted when I got a BSOD whith the memory management code, after having resolved, my HP logo divided into 2 a top and a bottom, but is returned to normal, it does this for about a week and this time, he does not return to normal

  so I started at the login screen and I saw that it was 4 with 2 vertical on the right full screens and 2 screens of half verical on the left

  so I reinstalled windows, but to no avail.

  I've also updated my drivers buht

  I connected to an external monitor, it looks perfect

  Name of the OS Microsoft Windows 10 Pro

  Version 10.0.10240 Build 10240

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of system OFFICE-ACO8E6T

  System manufacturer Hewlett-Packard

  HP Pavilion dv6 Notebook PC model system

  X 64 PC system SKU C2Y45AAR is of Type #ABA

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.26, 03/04/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  Start secure State

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume2

  The local United States

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  User name of OFFICE-ACO8E6T\LIVINGSTONE

  Time zone Pacific Daylight Time

  Physical memory (RAM) installed 8.00 GB

  7.89 GB total physical memory

  5.57 GB available physical memory

  9,77 GB total virtual memory

  7.42 GB available virtual memory

  Pagefile 1.88 GB of space

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware Yes

  Hyper-V - data execution Protection Yes

  Hi @OPTIMISTICSTONE,

  Thank you for joining the HP Forums!

  I noticed your post on how your screen divided into 4 with your HP Pavilion dv6 Notebook. I'm happy to help you!

  What is the number of product/model of your HP Pavilion dv6? How can I find my model number, serial number or product? There are several versions, example: HP Pavilion dv6500.

  For now, maybe the steps described in this guide will help. Solve the problems when switch between views using FN + F4.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this guide to solve your problem!

• How can I create a screen divided into movie maker?

  original title: Director - split screen

  How can I create a screen divided into movie maker?  I have a video of the presenter and a PowerPoint presentation and would like to show on the screen in the film.

  You need a custom... transition may be the
  the following link would be a place to start.

  Split video Transition
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=200548

  Maybe the next Movie Maker Forum
  would provide more information:

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/

• computer laptop screen divided to 6 screens!

  Hi guys

  I have a big problem with my laptop screen.

  my notebook is HP G60-120US when the laptop starts up the screen divided to 6 screens like this

  

  I have now, it is the feature of hp or my screen problem

  Thank you guys.

  I read on other threads that it is the result of cracks forming in welding under the video chip.  If the laptop is still under warranty, contact HP customer support.  If not, call a few computer shops and ask a quote your video chip reflow.

  This is the thread that I found it:

  http://h30434.www3.HP.com/T5/notebook-display-and-video/dv6000-with-multiple-images-on-screen/m-p/526451/highlight/true#M20237

• screen divided into two half with a separator to resize - apex 4.0

  Hello experts,
  
  How can I create a screen divided into two, with a divider in the middle that the user can use to resize the two halves? With the help of apex 4.0
  
  Thank you
  
  Salome

  Yes, take a look at available to JQuery UI plugin developed by Tobias Arnhold, he of really cool stuff.

  [Plugin JQuery UI for APEX 1.2 | http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/uilayout-part-1-initialize_77.html]

• Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

  I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

  WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

  This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

  How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

  I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

  Thank you

  Hello just YOU

  Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

  Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

  Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

  Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

  Bye and good luck!

• Notebook15-r110na Energy Saver: my laptop screen has suddenly started to go black when I need to plug the power adapter

  Laptop screen has just started to go black when I need to plug the power adapter to recharge, if I get screen back to normal.  I have not downloaded anything new recently.  I have download the free 10 Windows but that was months ago.  Any help would be appreciated, but please not too technical as I'm not an expert on computers.

  Maybe the powerplan battery is changed or not properly configured. You can see the current powerplan thanks the battery status bar icon.
  Please check if the powerplan options are correct.
  More specific:
  Brightness updates when it is plugged into the charger OK?
  
  Also: If the screen goes black, can still use you the shortcut keyboard keys to adjust the brightness?

• Computer laptop screen flashes

  Hello. My laptop screen started blinking last night and it jumps between desktop screens and start. Also, the icons on the taskbar disappear and reappear when it flashes. I see that others have had this problem on another thread, but it does not resemble a solution posted after the first response.

  So far I used F8 to access Advanced Boot Options to run a system restore. I did the last update of HP using as reference. The restore went very well, but does not solve the problem. I tried to go back to the previous update and run another restore, but then I got the message that the restoration has failed, and my c drive could be damaged. I can't run a check on this record that the laptop doesn't let me log on as an administrator on the application of the control panel when I right click on it.

  II have worked on this problem for the last 2 hours and don't know what to try next and would like some ideas. I'm not very techno then simple instructions work best. Thank you.

  Hi AndreaJJ,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about your laptop flashes between the desktop and the start menu. I'll be happy to help you. I did some research into your solution and found very little information but I found some promising information. Let's look at disabling the Windows Error Reporting Service. To do that you need to access the Services that third link will show you how to get to Services and how to disable a service. In the list you will be looking for Windows Error Reporting Service and disable it. Give that a try and let me know how it goes.

  Thank you

• My laptop screen fades dying, a second screen plugged... but it displays as a part continues to right-hand side of the screen

  My laptop screen fades dying, connected a second monitor. I need to do (in display) do the pluged in the number one monitor.  Because it shows now it acts as an extension (on the right side of my screen.  My mouse pointer can migrate from one screen to the other and my start maing buttons that I don't see on my laptop screen.  What I really want is for the two monitors to show an identical copy of one.  Or at least put the plug in the monitor by default #1 and lapbopscreen #2 I hope that this will make sense I help eed before the screen of my laptop completely died please...

  Hi VictorReventlow,

  Try the following steps to extend the monitor on the second screen.

  1. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  2. Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  For more information, see the articles below.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx