My laptop screen turn black while it ' s always running

Similar Questions

• Laptop screen turns black/inactive after being closed and reopened

  When I close the lid of my laptop and open it again the screen is black or inactive. I do nothing as possible re - turn on the screen not to mention that my laptop restarts. What should I do? I have a Dell Inspiron 6000 and am running XP 32 bit.

  Hello

  Have you turned off the laptop before you close the lid?

  You get an error message when you restart?

  You can try to use the keyboard and check if it works.

  If it works, then you can try to change the options for the keyboard power settings and check.

  a. Click Start, click Run, type control keyboard and then click OK.

  b. click on the Hardware tab, and then click Properties.

  c. click Change settings

  d. click the power management tab and check that allow it this device to wake the computer is turned on.

  e. click OK, and then click OK again.

• Screen turns black during a short period of time and after 5 seconds on the Satellite A200-1DN

  Hey there
  I have a little problem with my computer, when I start a game, more games, age of empires 3, nfs most wanted, grand theft auto: vice city etc, the screen turns black during the game and then corrects itself after a few seconds, it becomes boring xtremely, especially when you are in the middle of something.
  After that the game closed in the lower right of the screen in the taskbar, a pop up appears saying my display driver has stopped responding, resulting in at least 5 different file names that have stopped responding.

  I have a Toshiba TFT screen with direct x 10(which might be the problem with the older games,i think!).
  Any help would be appreciated.
  My computer configuration is the graphics card with 1.5 GB of RAM, vista and intel 950 processor intel dual core.
  THX.

  Have you tried to play a game designed to run under Vista OS or you have noticed that play WXP games on your laptop preinstalled Vista. If possible, try to get the Vista game and test it again.

  I wonder if something goes wrong, while playing older games WXP on Vista platform.

• Screen turns black when it is online.

  Whenever I'm online or simply using my laptop, my screen goes black, I have to close my notebook or turn off several times for the light on the screen to turn back, why he did this?

  The screen goes black while you are an active something or the computer sitting idle for several minutes, then the screen goes black?

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• My Windows 8.0 laptop screen is black but can still see white mice

  Hello

  My laptop screen is black after I updated to windows, and then did a registry clean up & optimization.  I tried to go into safe mode to try to overthrow windows reverts to its previous state feasible, but I can't get into safe mode.  I tried to press F8 or F8 and Shift together key but the windows loads normally, and then the screen stays black.  I can see the mouse and she is white and sensitive.

  Someone help please pointing me in the right direction of what to do to get it working again.

  Thank you very much.

  Ted

  Hi Ted,

  See if you can access the Windows system restore using the following method.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point at least 48 hours before the problem arose first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Pavilion xL844 screen go black while booting

  Pavilion xL844 screen go black while booting, I put a new drive hard in and installed Xp everything is OK but when I reboot in the middle of the home screen go black, and if I try to reinstall windows it works until I reboot then it go black again.

  I tried a new video card, and it worked thank you

  I don't know how to close this thread

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• BlackBerry smartphone screen turns black in the Blackberry Bold 9900, but everything else, keys, touchpad screen and keyboard still works.

  It is a problem, I think that many have known, but there is no real solution to the problem. However, initially all of a sudden phone has begun to show an error (can't remember not exactly what, but something related to something does not turn) and the screen locked with constantly showing loading circling constantly clock and the narrowing of the battery quickly. what I've done; Hold the alt + right shift + del (twice) to restart the phone. Restarting the phone, the screen turns black (which indicates there is neither power or the screen itself issue and it's just a matter of graphics functionality). The phone restarts you black screen, the phone clearly charged the software couple received messages (indicating the phone works and the network also works). The phone rings again and the touchpad works if you know by heart, keyboard and the short keys for speed dial works (which means that yo can call), but the screen turned black. I think it's graphic material rather software number. I tried to do all sorts of stuff and things, did not work. Finally, I decided to restore the Blackberry software (running the latest version 7.1) so I plugged it in to the computer and run terminal BlackBerry Desktop to perform an update failed with this error: "an error occurred when downloading the BlackBerry® Desktop software. Please try again. "and offered to launch the"regsvr32 ole32.dll"in order to connect to the Blackberry server to do the update. tried, restarted my PC, plug the unit again removing battery, replacement and tried again, keep showing the same error. I tried all the advice forums, youtube videos and even troubleshooting I contacted Microsoft (running windows 7 64-bit), server connection module installed and works perfectly still having the same problem.

  I hope that blackberry had a clear answer to these questions and have someone in the customer service who can solve the problem instead referring users to the forum!

  Anyone who had experienced the same problem and found a solution, please respond. your help would be much appreciated.

  Thank you.

  The GPU is integrated into the cpu, so the phone would not ring or the touchpad does not work. It is possible that the phone fell or anything that could cause the connections on the motherboard to disconnect, I gave up my 9930 and causes the connector unplugs. Would you feel comfortable taking apart? It's easy, I think you could look up how do on YouTube. I could help you if you are on Central time or Pacific.

• Screen goes black while browsing on the Internet using Safari

  Original title: the screen goes black - windows 7 home premium

  my screen turns black during surfing. I use Safari and have several windows open at the same time. Photos on Facebook, I click find sometimes black. All windows to show a little blue circle spinning and I have to restart... I uninstalled Safari thought it was but it kept happening. I'm at my wits end. Have done all updates as they come in...

  Hello

  1 have had any changes made on the computer before the show?
  2 - is the problem occurs when you use Internet Explorer?

  I suggest you to use Internet Explorer and test for the problem on the computer. If the problem occurs in Internet Explorer, also try the procedure described in the link and check if that helps.

  Method 1:
  Try the procedure described in the link.

  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:
  I suggest you to restart the computer in clean boot mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  If you are not facing problems with Internet Explorer and you should always check with Safari, I suggest that refer you to Apple support link:
  http://www.Apple.com/support/Safari/

  Hope this information is useful.

• Computer laptop screen turns off (it returns when the mouse is moved) when the settings say should not

  My laptop screen goes black after a minute, even if I put power to never the brightness options and it stop after ten minutes

  Hello

  Try to run the electrical troubleshooting utility and check.

  Troubleshooting of power allows to solve any problem with the computer's power settings.

  a. press the w key and Windows and type troubleshooting.

  b. press ENTER.

  c. click Show on the left panel.

  d. click Power.

  e. click Next and follow the on-screen instructions to solve the problem using the troubleshooting of power utility.

  Also, try to create a new power plan and check if it makes a difference.

  Go through http://windows.microsoft.com/en-in/windows-8/power-plans-faq

  Hope this information is useful. If you have any questions, please let us know.