my laptop was a bang and now I have no operating system

Similar Questions

• I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing. How can I get Firefox I use back?

  I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing.

  How can I return to my old system or download one that will work. bold text

  You can download Firefox here 3.6.xx:

  http://www.Mozilla.org/en-us/Firefox/all-older.html

• I let someone use my computer and somehow they ended up formatting my hard drive, so now I have no operating system. If windows are not coming how can I fix.

  I let someone use my computer and somehow they formatted my computer, s he always tells me to run the Startup Repair, but it won't let me. Someone knows how to fix this?

  Your best option is to try to reinstall Windows 7:

  If Windows 7 is pre-installed:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
  ------------------------------------
  This is how the recovery partition is accessible to most popular brands...
  For Dell, press CTRL + F11 directly after switching on the device
  For HP, press F11 directly after switching on the device
  For LG, press F11 directly after switching on the device
  For Toshiba, press and hold "0" BEFORE and during the power upward
  For Acer, press and hold ALT + F10, as soon as you see the logo
  For Asus, press F9, as soon as you see the Asus logo.
  For Samsung, press F4 to the power upward...
  For Fujitsu, press the F8 key directly after the power
  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  If you have a retail copy of Windows 7 installed, use your reinstallation disk to perform a new installation:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• Fixed the pc and now problems with the operating system.

  So a few weeks ago I had replaced my motherboard fried and all the rest. Windows claimed to resurrect my computer, my copy of Windows 7 is not legitimate and does not accept my product key. Any advice on how to fix this?

  If your license of Windows 7 comes with the previous motherboard, it is not transferable to a new motherboard.

  If it is a license upgrade of retail that you bought in a store, the motherboard, you take a match it must have a previous qualification licence.

  You can also try the following:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• SAMSUNG RV510 laptop computer and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green.

  I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
  Please give me a solution for this.
  Thank you

  See its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• my laptop is insafe mode and now my screen is huge and I have no sound while it is in this mode... How do you turn off safe mode

  original title: safe mode

  my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?

  Hello

  audio drivers are not loaded in Mode safe

  read this to get out of Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Hello guys, I installed Windows which was not original, and now it's not true, I do not know the product key.

  * Original title: product key

  Hello guys, I installed Windows which was not original and now it's not true, I do not know the product key and I want to activate how?

  If the edition installed does not match the edition, you have a product key because it will not activate.

  If you have a product key for the specific edition installed, try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought Adobe Creative Suite 5 Master Collection a good a few years ago, I had it on a mac book and now I have a new mac desktop and I want to install it on my new desktop, but it doesn't have a hard drive so I was wondering if I can use the nude 22 dige

  I bought Adobe Creative Suite 5 Master Collection a good a few years ago, I had it on a mac book and now I have a new mac desktop and I want to install it on my new desktop, but it doesn't have a hard drive so I was wondering if I can use the number 22 of diget get on? I don't remember what my Adobe ID or the password is because he did years that ive connected and used, honestly I don't know what to do?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/1986122

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• our Organization has a team account and I currently have my apps on my desktop and now I have a laptop too and would like to downlaod the apps on it. Do I have to download the free trial first?

  our Organization has a team account and I currently have my apps on my desktop and now I have a laptop too and would like to downlaod the apps on it. Do I have to download the free trial first?

  Move of Adobe Creative cloud to cloud creative download & install

  No need to download the trial version. You can directly download the CC apps.

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul