MY LAPTOP WON'T TURN ON! AFTER I LAUNCHED DAIGNOSTIC TEST AT THE DISK HELP PLEASE!

Product name: HP Pavilion Notebook PC 1214tx g4

Product number: QG372PA #UUF

using Windows 7 64 bit!

Hello

If you have run the test on the HARD drive in the Menu diagnosis (f2), try to run a test on the HARD drive in the Bios Menu as follows.

Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you should find the facility to conduct a test on the hard drive.  Post back with all the details of any error message.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Laptop won't turn on after the new battery.

    A few days ago, when I got home, I found that my VAIO VPCF1290x of 3 years was dead. The battery indicator has been telling me to get a new battery, but I thought it would be enough for now.

    Problem: Laptop wouldn't turn on after pressing the power button.

    (1) with the adapter and the battery still in my laptop, by pressing the power button does not turn on my laptop. However when I press the power button, green light battery (the button itself) indicator on for about a second, then dimmed quickly.

    (2) after reading some forums, I decided to fill my laptop into the battery button for a good 30 seconds trying to turn slot WITH the adapter. It turned on my laptop, but it took a good 2-3 seconds for the laptop to make all sounds as if it was about to start.

    I have since then bought a new battery and a reason that my laptop lights at all. When I connected my new battery to condition it green button energy came on again for about one second then disappeared.

    I don't know what's the matter with my computer and would like to help. I KNOW that I should probably get repaired but would like an idea as to why my laptop behaves like a *.

    EDIT *.

    To give more information, when I have the OLD battery placed in the computer of the battery indicator is a constant flashing orange.

    With the NEW battery sony return the same thing occurs when the battery light constantly blinks orange.


  • PC won't turn on after that heating is triggered off the coast

    I knew better than that, but was cold and could not get any other energy sources in the room.

    Connected to my HP Pavilion all-in-One (Windows 7), include I - couple additional HDs, 2 printers (because my wireless HP printer jam printer again and made a clicking noise when you send something to print, but it won't pull the paper but I will post only under printers), USB hub and speakers and the Sub.

    Switching on of all this is two small regular bands and a 450va Fellows Battery Back Up Power, that power more fellows to strip something happened and the Stoppers on the work on one side. : (

    Last night it was cold so I went and got a little radiator and not be able to access another electric taken in the room, I plugged it in one of the smaller bands that had the outputs more available. The Unit carried out an hour or two and everything seemed fine.

    When I got up to walk out of the room, I fell a little more of the heater and it farm and therefore part of the office, but I can see a printer is turned on. I just checked the heating on another outlet and it works fine.

    I checked all power strips and smaller Exchange, one of the oldest with a little again, bit a wider power seems to come from all power strips. I know I need to check each of them with a little to make sure they really are producting power, just not a light on for some reason any.

    But the Bureau not power anything. I just read something where it says to unplug the PC and leave that he unplugged for a minute, then after a minute hold button power/start on the PC for 30 seconds, then plug the backend to see if it works. HE HAS NOTHING. I read, where he said it was supposed to take care of any problems with the 'crowbar' in the power circuit, and I don't even know if it is compared to my computer.

    I'll pay more with swapping power supplied and plug things on them, but other suggestions would be much APPRECIATED!

    ONLY connect the computer & monitor in one outlet. Bypass all these power cascading several bands. Then perform the tests appropriate to the device. Here's a general tutorial.

  • HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

    My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

    Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

  • HP-G62226TU: my laptop won't turn on when I push the power button

    Hello

    My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

    My laptop is 2.5 years old and was working fine without any problems so far.

    Please suggest.

    Thank you

    Himanshu2303 wrote:

    OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

    What do you suggest I should do?

    How much will it cost in India?  I have no idea. I live in Europe.

    I suggest to ask a repair shop of PC or laptop.

    If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

  • PROBOOK 4530 S: MY LAPTOP WON'T TURN ON

    my laptop won't turn on... I tried a hard reset and still its doesn't turn is not on... If I plug the power supply cable there is no sign of life whatsoever.the power light does not turn on either

    the fan does not turn on... it is not even a single sound or sign of life... I changed the batteries... I changed the charger/power supply but still nothing.i have tried to reinstall the memory and even changed the hard drive, but still nothing and I now suspect the motherboard

    Have you tried to connect the laptop to a power adapter and then gently shake the power adapter connection to see if the power led blinks on and outside?

    Who will let you know if the problem is the connector of the DC adapter on the motherboard. They are not lacking.

  • Won't turn on after "relocation" on same HD Win7.

    Won't turn on after "relocation" on same HD Win7.

    Same HD (with existing work WIN7) has been used in new construction after that old MB crapped out. It wouldn't boot, so I re-installed Win7.
    It was the 2nd PC on a PC 3 family pack update version.
    The last time that I had a problem with the activation I actually had a phone number to talk to a real person, but now I keep running into dead ends... help! (25 days)

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Direct activation number: (888) 725-1047

    1-800-936-5700

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  • I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

    I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

    Download the files to install cs4 design premium and install ps to use them,

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

    I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

    Please try to use different CD or simply remove the CD then insert again the installation request for the files.

  • BlackBerry 8520 Smartphones: hangs after "eception error: index 5 > = 5" message. Help please

    8520: hangs after "eception error: index 5 > = 5" message. Help please it is urgent. Thank you

    Hey Barat,.

    Welcome to the community of BlackBerry Support Forums.

    To solve this untrapped exception error you will need to perform a cleanup of recharge of the BlackBerry Device Software.  Follow the steps in this article: www.blackberry.com/btsc/KB11320

  • iPod 5th generation won't turn on after falling in the bathroom and then dry with rice! What should I do?

    Hello

    My iPod touch 5th generation won't turn after being immersed in water bath for about 15 seconds and then dried to rice. I tried pressing both the House and the buttons but nothing happens! My iPod is about a year and a half and it usually works very well.

    It really scares me because it's the only small portable device I have, which means that if I lose, I'm stuck carrying my iPad autour, which is quite heavy. Also, I wrote something about the iPod that I really like, but I didn't sync it to my computer, as I was traveling while I wrote it and then also when the machine broke.

    This is an urgent matter, because I travel by plane in twelve days and there's a pretty long flight. I want it fixed right here - what can I do?

    Thank you

    Stella

    Hello moxie.star,

    Thanks for this info and choosing the communities Support from Apple. I know how important to get your iPod working again is for you! Based on what you said, it seems you can be affected by a hardware problem and get your iPod repaired by a technician to repair Apple. Please click on this link to find the best option for your situation:

    the Service response to iPod

    See you soon!

  • Laptop won't turn on (only for a second)

    First of all sorry for my English

    I have a laptop DV6541ev and since yesterday it won't turn.

    When I press the power button the lights come on for less than a second, and then the computer to turn off.

    Turns on the power indicator when the power cord is connected to the laptop.

    I tried the hard reset but nothis has arrived.

    Unfortunately, my battery is 'dead' for a long time and I can't check if I can turn it on only the battery.

    Also in the past, the power adapter lose contact with the laptop and I had to escape the cord until the contact is standy.

    Could be a motherboard problem or a problem with the Ac Dc Jack?

    Please help me

    Thanks in advance

    A pc technician checked my laptop... and he said that the motherboard is burned up/bad.

    I confirmed that too many others.

    I Don t go to replace it cause it s not worth the monay.

    I m going to buy a new laptop and sorry, it s not going to be an HP.

  • Re: laptop won't turn on

    I have a Satellite A215 who just won't turn on. I have the blue light flash on the power cable and battery. I tried to take out the battery and memory.
    I tried to use only the power cord power, but with no luck please please help got all my pics on laptop and it won't just turn

    Have you tried a different memory location? On some PCs, you must have a Module of memory in the first place. Otherwise, it does not start.

    If this does not work, then the motherboard or video card might be faulty. Take it to a Service Center for repair.

  • Pavilion 15, G8D9OPA #ACJ: my laptop does not turn on after pressing the power button

    HII, after a week that I have on my computer hp laptop 11 months but its not get. I even removed the battery and tried to get by pluging the adapter, but it doesn't work. What I would do. Please help me.

    Hi @Swati_20,

    Welcome to the HP Forums!

    It's a great place to find answers and advice!

    You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

    Learn how to post and much more.

    I understand that your Pavilion laptop not turn on.

    When I did a search with the product number, you provided I have no results.  Would you be kind enough to verify this information.

    How can I find my model number or product number?

    What operating system do you use?

    When you connect it to the power light on the power supply?

    Here is a link to the HP laptops - tests and using the AC adapter that can help.

    You can also try a hard reset.   HP - notebook computers use the hard reset to solve software and hardware problems

    Please keep me updated.

    Good luck!

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

    To show the appreciation for my efforts, please click the 'Thumbs UP' icon' below.

  • spectrex360: Start button / stop / flashing laptop won't turn on

    I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power cord is connedted to the laptop. But the power button continues to blink and I can't turn on the computer. I tried to tap on the screen and the Microsoft keyboard key. Any way to reset this? Thank you

    OK, I found the answer. It was a hard reset. Just hold the Start button for 20 seconds (or until it no longer flashes) then wait a bit and you can restart the laptop.

Maybe you are looking for

  • where can I find my number of product on my notebook

    where can I find my code on my notebook

  • My USB ports do not work.

    HelloYesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my

  • What is this error from the device Simulator?

    weird! can someone help me. I am not able to use my Simulator to test my application. At start-up, Simulator gives following error. Error inside JVM: 0x00000008 read access violation I use JDE 4.3 and Simulator 8120 Kind regards -nitin

  • Windows 7 64 bit VPN client problems

    Hello I am running Windows 7 Professional 64 bit and Cisco VPN client 5.0.07.0240. I am able to connect to my corporate network and work ok but connection is very slow! Connection time is distributed as follows: Client program VPN Opening: 70 seconds

  • Ink does not join the labels

    I have a HP C7280 printer. I'm trying to print on Avery 15660 clear address labels and the black ink of an original HP cartridge does not adhere.  The labels are labeled "Laser".  What is the problem?  I need to print on clear labels, is there a solu