My last episode shows. My second to last... does not work

Similar Questions

• Show/hide bounding box option does not work. No more keyboard shortcuts. Also more problems.

  I had problems with the CC Illustrator who started this morning and I hope I can find a solution through this forum. I tried to contact adobe in appellant and chat support and I didn't know until today is how problems in their customer service program. I was transferred several times to the bad people while waiting for an hour each time, or is disconnected during a hold and had to start over my waiting time. Cat was not helpful because they don't answer my questions or give me a direct line to call, instead of repeating that I have contact the same telephone number that puts me on hold and then drop my calls (I use a land line).

  It is very difficult to describe the problem, but I'll do my best. I can't use the bounding box feature, even if the show bounding box option is selected. None of my shortcut keys work and all the files that I opened are unbearably slow. Everything I do in the program is hit or miss or not even happen, so in order to see the change, I have to scroll the artboard and return; that is, draw a rectangle (then has to scroll far off the screen to the Board chart and scroll back to see), fill it with a color (then have to scroll far and scroll back to see again), or changes do not occur at all (scroll away or not). Also sometimes Illustrator does not recognize my actions unless I repeat them several times.

  I use the software Adobe CC every day at my work (Illustrator, Photoshop, Indesign, After Effects) and have never had a problem like that. I have not download or change settings on my computer before it happened.  All my other adobe programs work well as are all other programs not adobe on my computer. All my programs are now fully updated and restarted my computer at least a dozen times. If anyone could shed some light on how I can solve this problem, or have worked in it before that I would appreciate greatly any assistance. I'm very behind on my work and have deadlines to hit. Thanks in advance for any help!

  Data sheet:

  iMac
  27 inch, mid-2011
  Processor: Intel Core i5 at 2.7 GHz

  Memory: 8 GB at 1333 MHz DDR3

  Graphics card: AMD Radeon HD 6770 M 512 MB

  Software: Mac OS X Lion 10.7.5 (11G63b)

  Traore,

  There is a possibility I thought, a little hidden in 5) and perhaps unlikely because it happened only today, namely the lack of having two families of fonts Verdana and Tahoma installed as TTF and activated; that caused some hesitation to Illy reported in the past.

  But it sounds a little weird than that.

• How can I run two different versions of Firefox, the last does not work with a site important I need to use?

  With the latest version of Firefox, I can't ' fast email ' to my students through the ANGEL of the College System. I had to uninstall and go to an earlier version. I prefer the new rev.

  A way to run two different versions. It doesn't have to be simultaneously. Seems to be a problem on the Mac and my XP systems.

  Thank you
  Kim

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
  • http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• NoSQL Oracle database charger with EE last does not work

  I am unable to run the NoSQL Oracle database loader to load data at: http://www.oracle.com/technetwork/products/nosqldb/documentation/index.html which is included in the documentation with the latest download of Oracle NoSQL. I downloaded the EA on my Unix machine and have the JAVA version:
  race of '1.7.0_17 '.
  
  (I'm under KVlite. I was able to run the Hello Big World Data example).
  
  This is step 6 in the Readme.txt file that I can't run.6. To load the contents of the tweeter to the Bank to run this command:
  $java - cp SAMPLE_HOME/OLH/ONLH/deploy/onlh.jar; SAMPLE_HOME/OLH/ONLH/lib/NoSQL/kvclient-1.2.123.jar oracle.kv.sample.Loader-i SAMPLE_HOME/OLH/ONLH/deploy/airline_tweets_search-03-01-2012-082206.xml m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  I have the tweets.xml of the airline and the jar two files onlh.jar and kvclient - 1.2.123.jar in the deploy directory. When I unzip the package does NOT contain the HLO directory (as shown in above command) if it is a question with above. Also; use the JAVA throw errors in above.
  I ran the following:
  
  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  My output:
  
  11gR2.2.0.39
  
  (I don't get a validation error message invalid as described in examples of java files. I tried many variations that precedes. In addition, the sample in the README.txt step 6 also does not align with the documentation available in the java file < tagname1 > < tagname2 > use. I am able to run step 5 to see the use of arguments.
  
  I'm out of options on how to solve this problem and would appreciate some advice asap for a demo that I build. I certainly need to have this job so I can load my own cvs (with a few tweaks to the arguments). I'm beginner JAVA Programmer so explanations with examples are greatly useful.
  Thank you

  >

  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m "US "-n ""-v " " d "|" xml t

  The file README says to the kvclient and the onlh.jar - cp, not onlh.jar in cp and the kvclient as the - pot arg. If you move the kvclient.jar to the - CP

  only.jar:.../kvclient.jar - cp

  It will work.

  Charles

• Show / hide the dynamic Actions does not work in Windows 7 IE10 and APEX 4.2.1

  Hello

  I have a page in the APEX 4.2.1 reactive Blue theme, where show or hide page elements based on changes to other page elements and their values, in terms of JavaScript expression.

  It's that everything works well in Chrome 31.0.1650.63 m and 25.0.1, Firefox but not Internet Explorer 10. I thought it might be linked to this solution to the problem of Ajax IE10 | Code of Jason and tried their recommendation, but appears not to have contributed.

  Help please!

  Thank you

  Alex.

  I found the problem and it was my fault. One of my dynamic actions using JavaScript expression conditions was missing quotes in $v ("P1_ITEM1"), breaking the rest of the related JavaScript code. Chrome and Firefox did not care, but IE seems to be less tolerant of mistakes like that.

  Scott, thanks anyway. It is useful to know that I have that option as well.

• Second free ESXi does not work up to disconnect first ESXi

  Hello, I have a free ESXi work to a Fujitsu RX300 server without problems.

  But now I installed an another ESXi on a Dell PowerEdge 2850 server and after an installation successfully, I can not ping the machine.

  If I disconnect the LAN of the ESXi first then second ESXi works correctly.

  Is there a limitation?

  It is necessary to do any special configuration in order to have two standalone ESXi works on the same LAN?

  Thanks in advance.

  ESXi is not a local console

  In fact, it does.  There is a possibility that you have a conflict of MAC address I think the above poster was referring to.

  In the yellow screen, press ALT + F1, and then type not supported - you won't see any output on the screen until you press on enter.  At the password prompt, type in your root password.

  In the CLI, use the esxcfg-vmknic-l command to review the VMKernel port settings.  You want to watch the interface "network management".  Check the IP address and the MAC address from the other ESXi host to determine if you have any conflicts.  If you do, you can use esxcfg-vmknic with the d - and - an arguments to delete and recreate the VMK interface.

• Try to customize the Firefox toolbar, but when I 'Right-click on a section empty band tabs' dropdown menu shows 'customize' you fake and does not work.

  Nothing to add; can you help me?

  KELVINSIDE; Problem solved / overcome. Thank you.

• key combination ⌘ + 1 (2, 3, etc.) to open first, the second bookmark etc does not work in safari 9.0.2!

  Since my latest updates of 'el capitan' this work of doesn´t useful key combination is no longer in effect.

  Please select the tabs in Safari preferences window, then uncheck the box marked

  Allows to switch tabs ⌘-1 to ⌘ - 9

• Show/hide the track button does not work

  Happens to me all the time. It no longer works after hitting twice. Please help me to fix this.

  Hello:

  This 'problem' is because the gaze just only the preview display do not applied at the level of the railway.

  Look to have a preview warning in red letters. You must apply the look and after you can turn on or off the track.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work.

  Hi, I have Windows 7 and the Sound Blaster Recon 3D PCIe audio device. In the last few weeks, I noticed that some videos will play without problem and some have the following problem: the music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work well. Specifically, I hear a noise when they speak. But if I keep place the volume of the speaker (on the icon) and keep clicking the open icon, the sound begins to get stronger and you can actually hear it above his ' ding ding ' by clicking on the icon of the speaker volume. I've never had this happen before. I don't think I did something different from my usual activities lately and haven't downloaded all new program. Music plays without problem. Only the French-speaking parties. I tried the program compatibility troubleshoot and it told me "Incompatible application". Don't know what it means that I am aware of no incompatibility. Never happened before. Just suddenly appeared. Don't know if updates recent MS interfered with the audio device.  Also, I tried looking for questions that are already using the Control Panel, Manager of devices... and no problems were discovered. I put the volume on the strongest settings already and that doesn't work anymore.

  Thanks for your help to solve this problem.

  Just an update.  Problem solved. Faulty speaker connections. Did not touch the connections before the problem, so not sure what happened to these connections, but the problem is resolved. Thank you.

• I show several problems with extensions does not not after the last CC PS upgraded.

  USM double, for example, as well as several others are not loading any method. No problem before the major CC PS upgrade in June. Remove and reinstall does not work, manual installation discouraged with Panel of Exchange etc.

  I really don't want to track and communicate with each author to see what the problem is that it looks like more systematic

  They are not installable in the application of obsolete Plugin Manager. They show as purchased on the new CC web add Manager, sync is on, but only a handful are in place such as Kuler and AdobeEMailer. Double USM for example is supposed to appear on the filters menu (and not before the release of June), but he isn't.  There is no error log I know for this kind of failure that seems all hidden in the web cloud CC process to add ons and extensions.  What seems to be the addons and extensions start appearing as they upgraded to the new version. This looks like the case with Double USM, which is now available, but has been absent for a month or so after the release in June. So I see how it works as long as the extension developers playing catch up with Adobe, which is inevitable I guess and is something to know if extensions are an integral part of your

  workflow.

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.