Show / hide the dynamic Actions does not work in Windows 7 IE10 and APEX 4.2.1

Similar Questions

• Show/hide the track button does not work

  Happens to me all the time. It no longer works after hitting twice. Please help me to fix this.

  Hello:

  This 'problem' is because the gaze just only the preview display do not applied at the level of the railway.

  Look to have a preview warning in red letters. You must apply the look and after you can turn on or off the track.

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dynamic action does not work with the item change event

  Hi guys,.
  
  I have a problem with the dynamic Action. On my page, I have three points. (P2_X-> display only, P2_Y-> P2_Z-> button, TextField) and two dynamic actions. One of them is running javascript. When I press the button (P2_Z) this dynamic action affects textfield (P2_Y) value to display only the value (P2_X). (This dynamic works). And there is another dynamic action for the option to display P2_X. This dynamic action fires to P2_X point value changes. This DA (dynamic action) runs a plsql code and inserts the value of the P2_X element in a table (test_tbl). But when I try to do it always inserts the null value.
  
  The plsql code is below:
  
  Start
  INSERT INTO TEST_TBL
  VALUES (: P2_X);
  COMMIT;
  end;
  
  
  You have an idea? If you need, I can give the user for apex.oracle.com past.
  
  Thank you

  Hello

  Do you have the "points Page to submit" to the process of PL/SQL, the value of the correct item? (P2_X)

  Concerning
  J :D

• Confirm the dynamic action does not not as expected in the APEX 4.2.5

  This looks like a bug in APEX 4.2.5.  I have a page with a "Cancel" button that redirects to another page.  There is a dynamic action that fires on the button with a confirmation action and the text ' are you sure?  However, if the user selects OK or cancel in the confirmation dialog box makes no difference - the redirect is always performed.

  I found this question after the migration of a page that worked to 4.1.1-to-4.2.5.00.88 APEX and were also able to replicate on apex.oracle.com here:

  https://Apex.Oracle.com/pls/Apex/f?p=19896:2

  (Press the Cancel button in the top right of the page redirects to page 1, regardless of the user's response to confirm the popup.)

  I don't need someone to suggest the alternative code, I know how to build my own confirmation processing.  I want to just raise this as a bug as possible and see if there is a solution to make the dynamic action works as it should.

  NB I found this in the patch notes for 4.2.5.00.88 on a fix for a similar problem:

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-patch-set-notes-2186274.html

  15984978

  Dynamic action front-Submit with a confirmation message does not

  Hi Tony,.

  I think the problem is that the action of the button is defined as 'Redirect page in this Application', but it must always be "defined by the dynamic Action" as soon as you have set dynamic actions 'click' to a button. Normally, which is automatically changed as soon as you create your first dynamic action of a button, and I just confirmed by creating a test button in your application that has been defined as «Redirect...» ». After that I created a dynamic action the action of the button is set to "defined by the dynamic Action.

  Is it possible that you have modified the action of the back button to «Reorient...» » ? The question why «redirect...» "does not work, it's that we cannot guarantee in what order the browser will process click on events defined with onclick in the tag button itself and those events attached as a click event handlers. This is why it is necessary that everything is defined as dynamic actions. Only in this case you will be able to cancel the treatment.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

  Post edited by: Patrick Wolf

• I am trying to reinstall Flash CS4 professional as the script action does not work, but now I get an error: 2 message when I use the original CD to reinstall

  I can't get the original disc work on resettlement.  I get the message

  AdobeColorCommonSetRGB

  Error:

  Error 2.

  I'm teaching a class using this program on Macintoshes running 10.9.5 and action script does not work.  It will work on any program designed by using the 10.8, but if you create an animation on 10.9.5 the action script will not work for buttons

  You must manually remove the color in question profiles... Run the cleanup tool and see if it's to help you get started.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Comparison of 2 numbers in dynamic action does not work

  Hello
  I am trying to create a customer validation between the 2 items (type number). If item1 > item2 then alert (the value of item1 should not exceed item2).
  So I created a dynamic action (lose focus) about item1 with pl/sql expression: p_item1 >: p_item2 as the condition.
  
  the problem is that the dynamic action never fires. When you set the condition never, he shoots very well. When I put the condition of value in the expression 1 = expression2, he never fires
  but when the value of expression1! = expression2, he shoots very well. It seems to me little matter what values I use they never match. is this a problem of format because I have no relative model
  the two elements.
  
  any idea on what is happening?
  
  Thank you
  
  Published by: ICeT on August 16, 2011 13:18

  Hello

  You may notice that the item values are always STRING. So comparing: P1_ITEM1 >: P2_ITEM2 is a string comparison.

  If you want to compare only the numbers that you need to explicitly type conversion: TO_NUMBER(:P1_ITEM1) > TO_NUMBER(:P2_ITEM2)

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• Auto hide the scroll bar does not work (SE)

  I recently built a simple editing with the new setting "Auto Hide Scrollbar" Viewer, but it does not work as expected on my ipad.

  See the screenshot number and the version of the viewer below:

  

  The scroll bar and the superposition of 6px are still persistent on the screen.

  -Johannes

  Thanks for reporting this. I've logged it as a bug.

  Neil

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• The Task Manager does not work in Windows 7

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  If the Task Manager does not start, your computer may be a virus. Make sure that you have installed on your computer updated antivirus software, scan your system with the AV software in safe mode.

• The legacy program does not work in Windows 7

  MD simple burner will not work on windows 7

  Hi macdent

  Welcome to the Microsoft Answers Forum!

  I recommend you to check if the software is compatible with Windows 7. Here is the link that helps you check the compatibility of the hardware or software with Windows 7 Windows Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode. Steps to follow:

  i. right click on the program

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv7-2070ed: original program software does not work in window 10 pro and program

  Hello.

  I changed the windows for a full installation of windows 10 pro due to the corruption of the window vista recovery disk. (lost the new build software pre installed). Before I had vista Home premium. Some of the original program software don't work with wins it 10 pro. I found a rear window and HP Media Media Center smart webcam. All others on HP Smart media are not working due to no driver or competable with 10 pro wins. Is there some alternate software with the same use? I know that hp will not update the software program at the present time, alternatives is a server of HP smart media, but I would like to have a similar cause of program I liked the program.

  Anyone has a suggestion

  Hi Wawood

  Thanks for your solution. I've tried, but it does not work what so ever. I guess I better to forget and take my lost. Quite sad but its one of the things that fact you win and you lose a game. Some programs are perfect, but if the company of the pc or laptops drivers or updates on legacy systems we can not anything on this subject. Guess that's one of the problems with this new victory 10.

  Thanks anyway

• Show/hide bounding box option does not work. No more keyboard shortcuts. Also more problems.

  I had problems with the CC Illustrator who started this morning and I hope I can find a solution through this forum. I tried to contact adobe in appellant and chat support and I didn't know until today is how problems in their customer service program. I was transferred several times to the bad people while waiting for an hour each time, or is disconnected during a hold and had to start over my waiting time. Cat was not helpful because they don't answer my questions or give me a direct line to call, instead of repeating that I have contact the same telephone number that puts me on hold and then drop my calls (I use a land line).

  It is very difficult to describe the problem, but I'll do my best. I can't use the bounding box feature, even if the show bounding box option is selected. None of my shortcut keys work and all the files that I opened are unbearably slow. Everything I do in the program is hit or miss or not even happen, so in order to see the change, I have to scroll the artboard and return; that is, draw a rectangle (then has to scroll far off the screen to the Board chart and scroll back to see), fill it with a color (then have to scroll far and scroll back to see again), or changes do not occur at all (scroll away or not). Also sometimes Illustrator does not recognize my actions unless I repeat them several times.

  I use the software Adobe CC every day at my work (Illustrator, Photoshop, Indesign, After Effects) and have never had a problem like that. I have not download or change settings on my computer before it happened.  All my other adobe programs work well as are all other programs not adobe on my computer. All my programs are now fully updated and restarted my computer at least a dozen times. If anyone could shed some light on how I can solve this problem, or have worked in it before that I would appreciate greatly any assistance. I'm very behind on my work and have deadlines to hit. Thanks in advance for any help!

  Data sheet:

  iMac
  27 inch, mid-2011
  Processor: Intel Core i5 at 2.7 GHz

  Memory: 8 GB at 1333 MHz DDR3

  Graphics card: AMD Radeon HD 6770 M 512 MB

  Software: Mac OS X Lion 10.7.5 (11G63b)

  Traore,

  There is a possibility I thought, a little hidden in 5) and perhaps unlikely because it happened only today, namely the lack of having two families of fonts Verdana and Tahoma installed as TTF and activated; that caused some hesitation to Illy reported in the past.

  But it sounds a little weird than that.

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module