My lightroom CC is up-to-date, but I do not have the dehaze filter.

Similar Questions

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• I bought a laptop computer with non-genuine windows 7 I have the windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.

  I bought a laptop computer with non-genuine windows 7. I have the original windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.  Help me, please!

  You will need to either buy a version authentic retail Windows XP, with its key sales, to a true scource or visit the site of laptop manufacturers, support for your model and see what versions of win are taken care of, then buy a commercial version of this o/s.

  The key on the base of the laptop is the recovery key that requires that the recovery disks provided by the manufacturer.

  You could phone manufacturers to support to see if they have the origonal recovery cd send you, for which it maybe a small fee.

• I installed windows 7 enterprise version, but I do not have the administrator password? What can I do?

  I installed windows 7 enterprise version, but I do not have the administrator password? What can I do? I have a genuine license key, but when I retart my computer, it asks for administrator password which i have not received what can I do?

  The password is the one you created when you installed/configured win7, its nothing to do with MS or anyone else

• Hi, I need help, because I have a cancelled plan but I do not have the return!

  Hi, I need help, because I have a cancelled plan but I do not have the return!

  Hello

  I will arrange for the refund to be processed - please allow 3-5 days.

  Kind regards

  Bev

• I have photoshop CC and I know that yesterday a new version was available. In my PC Photoshop is indicated as upgrade, but I do not have the latest version. What should I do?

  I have photoshop CC and I know that yesterday a new version was available. In my PC Photoshop is indicated as upgrade, but I do not have the latest version. What should I do?

  Exitus are you open the version of Photoshop CC 2014?  You can find more details to launch CC apps after install - https://helpx.adobe.com/creative-cloud/help/launch-creative-cloud-apps.html.

• DataGrid: can I recover the data, BUT it does not show the datagrid control

  Hello

  Hi - I've traced data through php mysql in actionscript but it does not show the datagrid control. Here is my code.

  Import fl.controls.DataGrid;

  Import fl.controls.dataGridClasses.DataGridColumn;

  Import fl.data.DataProvider;

  Import fl.controls.ScrollPolicy;

  Import fl.managers.StyleManager; necessary to format the text in cells

  import flash.display.MovieClip;

  import flash.net.URLRequest;

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.net.URLLoader;

  to import flash.net.URLVariables;

  import flash.net.URLRequestMethod;

  import flash.net.URLLoaderDataFormat;

  Create a new instance of the DataGrid component.

  var aDg:DataGrid = new DataGrid();

  var myDp:Array = new Array();

  var myData:URLRequest = new URLRequest ("http://www.cambridgekids.es/kglad/php/getUsers.php");

  myData.method = URLRequestMethod.POST;

  var loader: URLLoader = new URLLoader();

  loader.dataFormat = pouvez;

  loader.addEventListener (Event.COMPLETE, dataOnLoad);

  Loader.Load (mydata);

  function dataOnLoad(evt:Event) {}

  for (var i: uint = 0; i < evt.target.data.cant; i ++) {}

  myDp.push ({number: evt.target.data ["firstname" + i], Apellido:evt.target.data["lastname"+i]});})

  / / trace (evt.target.data ["firstname" + i]);

  }

  myDp.dataProvider = new DataProvider (myDp);

  }

  aDg.dataProvider = new DataProvider (myDp);

  aDg.columns = ['number', 'Apellido'];

  aDg.setSize (800,300);

  aDg.move (150,200);

  aDg.rowHeight = 40; / / allows 2 lines of text in the default text size.

  aDg.columns [0] .width = 80;

  aDg.columns [1] .width = 30;

  aDg.resizableColumns = true;

  aDg.verticalScrollPolicy = ScrollPolicy.AUTO;

  addChild (aDg);

  DOH! I thought I was in the flex forum so ignore my previous answer.

  You must set the dataProvider on the dg after completing the dataprovider with data so spend aDg.dataProvider = new DataProvider (myDp); at the end of the dataOnLoad method

• I can't update windows until I reinstall windows vista service pack 2 CD but I do not have the CD. I have just the product key. How can I reinstall it with the key.

  I tried to update to windows, but get error 80070490 that says I have a corrupted file (CBS Manifest) that is to be updated... so I check the error and it says to uninstall windows and reinstall using the dvd... but I don't have the dvd for windows vista service pack 2... I have the id... product help, my pc is done to the breakpoint until I make updates! I tried Fix - It, and it says error can not continue... I ran to day thought advise that I could upgrade to windows 7... but apparently so that I can fix the problems of windows, I'm stuck. Thanks for any help!

  Hello

  Error code 80070490 claims a repair upgrade install, not an uninstall and clean reinstall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Have you tried the other option for system update readiness tool in the link I just gave you?

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  And you need a DVD of Vista from Microsoft to do a repair installation upgrade according to the instructions, NOT the normal manufacturer's recovery disks.

  You will need to borrow a Microsoft Vista DVD from a friend or working knowledge.

  Here's how a repair upgrade installation:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And if you can't get a loan from a Vista DVD from Microsoft, you may need to do a reinstall of Vista:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  See you soon.

• I want to delete windows 7 but I do not have the installation disk that came with the laptop

  I had a friend who has installed its own version of windows 7, however a month later his request for the code, which I did not, all want to remove and put windows vista back on but do not have the original installation disc

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Re-install OS, but we do not have the password!

  Hello

  I do volunteer work in a Museum of computing and we have recently been given 5 x 2.6Ghz Core 2 Duo iMacs. Every 20 "screens, circa 2006. They have OSX Lion installed, but the machines need to be set to zero and a clean install with the Museum in the admin.

  Donors in their wisdom (University of Cambridge) failed to restore these machines to the factory settings. They have simply laid on the Museum and have no help to offer on passwords etc. They are all missing their remotes, but otherwise are in pretty good shape, physically.

  Any advice on how to get these back to factory settings?

  With the old Mac where people had forgotten password I could just start from an OSX disc, substitute and perform a clean installation. These new Macs require me to download a new installation of OSX from Apple servers, which will check the record and then probably ask a password continue.

  Any help would be much appreciated, because all my experience is with Mac G3 & G4 (apart from my recent Macbook Pro and I did not have to mess with that at all).

  You must repartition and erase the drives, then reinstall OS X from scratch on each of them. Passwords are not required, unless readers are that FileVault protected in this case, the owner needs to unlock. Otherwise:

  Install OS X using the recovery network

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  Start on the recovery of the network server:

  Restart the computer after the ring, press in and hold the COMMAND + OPTION + R keys until a globe appears on the screen. Wait patiently - 15 - 20 minutes - until the main recovery menu appears.

  Partition and format the hard disk:

  1. Select in the main menu disk utility and click on the continue button.
  2. After load of THE select your newly installed hard drive (this is the entrance Out-dented with the mfgr.) ID and size) in the list on the left. Click the Partition tab in the main window of THE.
  3. Under the scheme of titled Volume set the number of partitions in the menu drop-down one. Click the Options button, set the GUID partition scheme, and then click the OK button. Set the type of Mac OS extended (journaled) format. Click on the apply button and wait until the process is complete. To leave and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button. Be sure to select the correct drive to use if you have more than one.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  This should restore the version of OS X, originally installed on the computer.

• 10.1.15 update gives the error message 1301. But I do not have the original diskettes

  I have Acrobat Pro v. 10.1.14 for Mac. It will not install the last update, I get error 1301, who claims that the contents have been changed since the original installation. (I think it's wrong!). The help page tells me to reinstall Adobe with the original disks. Problem is that I don't have the original diskettes more. Bought this thing in 2012. Registered as a user. Is there a solution for this problem?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• CS6 update was partial. Bridge 6 update, but Photoshop CS6 and Raw could not be updated. How can I try again?  Photoshop-&gt; help-&gt; update said apps are up to date but I do not see the previous versions have not updated

  Is there a way I can re - try the update?

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

• Why did I downloaded Firefox 4.0, but I do not have the firefox orange box in the upper left corner of the screen. My screen still looks like the old version of firefox. My screen does not resemble that of the video. nothing like that

  My Firefox 4.0 does not resemble something like the videos you show on the new Firefox features. My screen looks completely different from yours. It doesn't have the orange box in the upper left corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with ask a Question, a vertical line helps Firefox - Mozilla Firefox.
  Under this heading, I have File, Edit, View, history, Favorites, tools, and help. Below this line is a tab Ask a Question Firefox Help and has +. The screen of my husband looks identical to the orange box of Firefox in the upper left corner of the screen. I wish that my screen look identical to those shown in your videos. I have a version of Firefox 4.0 my husband has the Firefox 4.0 and the beta version. How to add the beta version? I have Windows Vista running systems. Help, please. Thank you

  To get the new interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• my printer is Canon pixma ip2702, but I do not have the disk, I can't conect with my computer says Error 41 is imposible

  where can I find the answer to my problem?

  Hi carlosVillalobos hotel.

  1. what operating system do you use?
  2. What is the full error message you get?

  I suggest you to select the operating system, then download and install the drivers from the following link:
  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_inkjet_printers/pixma_ip2702#DriversAndSoftware

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I have just torrented civilization 3 and have power iso but don't know how to get it operational. I tried very hard but simply do not have the ability. Can someone help me?

  I need help for my torrented game to work, I have all the parts just need someone to talk with me and guide me through it.

  I know Torrenting is really illegal?, use DAEMON Tools lite, it's the thing that I use or MagicISO Virtual CD/DVD Manager