My lightroom program does not open. I don't know if it's because my computer was just the updates and now Lightroom will not open.

Similar Questions

• My browser does not work and I can't close it to reinstall. I installed the updates and now I have this problem.

  I put the security update, and now my browser does not work. I have a white screen which is partly black and I can not close even to uninstall and reinstall. What should I do?

  Yes, confirm this answer of philipp is correct for this problem, the problem is the graphics card intel hd3000 with an old driver current, the easy way is to disable hardware acceleration,... to be honest... I think that workaround and lose all the benefits of hardware acceleration.

  Thank you

• I have 3 Professional edition on my desktop PC, they did an update and now they will not boot.

  I have 3 Professional edition on my desktop PC and they all have a few updates a few days ago and when they went to restart as he asked, none of them does not start because of the update, so is this update file corrupted? If Yes / if not, what should I do? all they can do is start in safe mode which make me good

  Hi Pflarry123,

  1. what happens when you start in normal mode?

  Method 1

  Check first if the start option in the system configuration utility to change in safe mode.

  (a) open the Start search menu or run box and type msconfig and press the Enter key.

  (b), select the Startup tab and make sure that this option of safe modebox is not checked, if it is checked uncheck it.

  (c) later, click OK and restart the computer.

  Method 2

  If method 1 doesn't work, then try to clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click restart.

  Method 3

  Restore the system to safe mode

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• We just did the last Illustrator updated, and now Illustrator will not start, restart the mac doesn't seem to help, all of the problems after the update?

  any help is welcome, we lack the latest version of mavericks, first, that we have problems...

  Tim,

  Here is the update of Extensions suitcase 5 that may solve the problem.

  http://www.Extensis.com/support/product-support/Suitcase-Fusion-5/

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Update and now HP LaserJet 3390 printer will not work on XP

  I have an acer netbook.  Yesterday morning my printer (HP LaserJet 3390) worked and now it doesn't.  I made a stop down on my netbook and I remember the icon that tells me an update is available.  I am running Windows XP with IE 7.  I let him do the update and now printer is not working.  I am printing wireless via a router and a modem.  I reinstalled the printer and the driver have also downloaded from the HP website.  Any suggestions?

  How to uninstall it?

  Hello

  With Windows XP, uninstall an update from start > settings > Control Panel > recent updates (check the "Show updates" box at the top of the page and select sort by name) should be at the bottom of the list. Right-click the update that you want to remove.

  * But *... It is not a good idea to install the security updates. You should try to solve the problem without uninstalling the updates.

  Don

• My Lightroom program does not open now.

  I cleaned and reinstalled everything on my macbook pro. My Lightroom program does not open now. I get a window asking for the buyback program. That I don't want. I need to install Lightroom again, I think. How can I do that, with the use of the serial number I already have?

  Angeliek,

  Since you bought a map, please see the details at the link below for instructions on how to redeem a prepaid card.

  You don't mention if you have lightroom 5 or 6 or an earlier version, but there are also instructions for lightroom 5 here:

  Using redemption code

  Guinot

• each program does not open b/c, he says: I'm in dos mode.

  "Original title: when I try to open most of the programs or download adisk for a printer etc it says'cannot open this program in dos mode" but I don't know how or why it is in dos mode and can't do things in the wok. Help?

  I put in 'anytime uprade windows' disk and now all programs does not open b/c, he said: I'm in dos mode. How can I get my computer out of back?

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Choose the program by default, open with context menu right-click on a program does not!

  When I right click on an application such as a text document and try to change its default program (right click, open with, choose the program by default) I get an error says: "this file has no program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel. »
  There is no problem to open the application, but the problem is the button ONLY!
  Fix association .exe, .txt, etc. did nothing!
  You can see my thread on SevenForums here: http://www.sevenforums.com/performance-maintenance/221020-choose-default-program-button-right-click-not-working.html
  and this problem as my problem: http://superuser.com/questions/69193/choose-default-program-does-not-work-is-broken-on-windows

  Thank you!

  Problem solved by a person post in the Forums of Vista, that what he said in this thread (Thread link: http://www.vistax64.com/general-discussion/202928-open-choose-default-program-error-vista-2.html#post939031 ):

  "PROBLEM SOLVED!"
  HOO HOO!

  I want to thank you once again BRINK for ideas on how to solve this problem.
  The next step below, this is how I solved this annoying problem:

  First of all, I came across this article on the Microsoft Web site by changing my google search to solve the problem. I started the google search with the following:

  'open with' lack of context menu

  Who brought results with the first being a microsoft link:

  Command 'Open with' missing from the context Menu

  Now the article didn't tell me exactly how to solve this problem, but it gave me an idea.
  He said look at the following reg key:

  HKEY_CLASSES_ROOT\Unknown\shell\openas\command

  And he said to watch the following default value:

  C:\%windir%\rundll32.exe shell32.dll, OpenAs_RunDLL %1

  After that, I noticed that the value was different, but then I noticed in watching the article says that this applies to Windows 95 and 98.
  I then looked at the same key on my laptop that is running Vista Ultimate 32 bit also and I noticed there are subfolders on my laptop that my office did not have.
  It should look like the following:

  HKEY_CLASSES_ROOT\Unknown
  \DefaultIcon
  \+Shell
  \+openas
  \COMMAND
  \+opendlg
  \COMMAND

  My office was only the DefaultIcon folder.
  Well I just copied the key from my laptop and voila... it worked.
  I thank the gods of the computer. This has really been bugging me. I know that some people would have just reconfigured or installed a new but I knew it was an easy fix. I thought it was a reg key or windows dll file, but I just need to find the location where he resided in. Luckily I came across this article which pointed me in the right direction. Now I feel like I accomplished something.

  Sorry if this is a bit long but I HATE it when I'm looking for answers in the forums and I see someone say they have solved their problem, but they either don't say anything about how they fixed or that they are so vague that they could didn't say anything.
  I hope this helps others if they have this problem.

  Thank you once again on BOARD! "

  That's all!

• The iTunes Setup program does not open windows 10

  I recently bought a new computer that comes with windows 10 home installed on it. When you try to install the version of Itunes available on the itunes site, the program does not open, but instead appears with the message

  The same goes for the other files installed that have been suggested for windows 10 errors and I can't seem to find a solution. I even tried to contact Microsoft technical support team however they were no help either.

  Help me please!

  I have also the same problem and same message. I have a new Lenovo laptop with windows 10. I sent support from Lenovo. I hope they can help.

  

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra