Cisco 2811 with NME-AIR-WLC6-K9 wireless module?
Hello.
I'm setting up a WLAN and wanted som to comment on certain things. I understand that NME-AIR-WLC6-K9 standard 802.11n support, I was hoping someone could confirm. Is that also to the NME-AIR-WLC6-K9 kan module be configured such that all the accesspoints can broadcast multiple SSID, say 10-15 SSID and each access point that I put in place allows to broadcast the same.
Best regards Tommy Svensson
Hello
T1 > I understand that NME-AIR-WLC6-K9 standard 802.11n support, I was hoping someone could confirm
1 YEARS > Yes it supports N, unless you have a N speeds taken APs supported as 1142, 1252, 3500, 1040, 1260.
Q2 > is it also for the NME-AIR-WLC6-K9 kan module be configured such that all the accesspoints can broadcast multiple SSID, say 10-15 SSID and that each access point I put in place allows to broadcast the same.
ANS2 > Yes we can broadcast multiple SSID with... However each counter can broadcast only 16 SSID, so if you have more than 16 SSID then you must configure the grouping AP or override Wlan function to achieve.
Let me know if that answers your question...
Concerning
Surendra
====
Please do not forget to note positions that answered your question and mark as answer or was useful
Tags: Cisco Wireless
Similar Questions
-
Problem Cisco 2811 with L2TP IPsec VPN
Hello. Sorry for my English. Help me please. I have problem with L2TP over IPsec VPN when I connect with Android phones. Even if I connect with laptop computers. I have Cisco 2811 - Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (2) T2, (fc3) SOFTWARE VERSION. I configured on L2TP over IPsec VPN with Radius Authentication
My config:
!
AAA new-model
!
!
AAA authentication login default local
Ray of AAA for authentication ppp default local group
AAA authorization network default authenticated if
start-stop radius group AAA accounting network L2TP_RADIUS!
dhcp L2tp IP pool
network 192.168.100.0 255.255.255.0
default router 192.168.100.1
domain.local domain name
192.168.101.12 DNS server
18c0.a865.c0a8.6401 hexagonal option 121
18c0.a865.c0a8.6401 hexagonal option 249VPDN enable
!
VPDN-group sec_groupe
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
no authentication of l2tp tunnelsession of crypto consignment
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 55
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key... address 0.0.0.0 0.0.0.0
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 10 periodicals
!
life crypto ipsec security association seconds 28000
!
Crypto ipsec transform-set esp-3des esp-sha-hmac L2TP
transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DESMD5
need transport mode
!!
!
crypto dynamic-map DYN - map 10
Set nat demux
game of transformation-L2TP
!
!
Crypto map 10 L2TP-VPN ipsec-isakmp dynamic DYN-mapinterface Loopback1
Description * L2TP GateWay *.
IP 192.168.100.1 address 255.255.255.255interface FastEthernet0/0
Description * Internet *.
address IP 95.6... 255.255.255.248
IP access-group allow-in-of-wan in
IP access-group allows-off-of-wan on
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
IP route cache policy
automatic duplex
automatic speed
L2TP-VPN crypto card
!interface virtual-Template1
Description * PPTP *.
IP unnumbered Loopback1
IP access-group L2TP_VPN_IN in
AutoDetect encapsulation ppp
default IP address dhcp-pool L2tp peer
No keepalive
PPP mtu Adaptive
PPP encryption mppe auto
PPP authentication ms-chap-v2 callin
PPP accounting L2TP_RADIUSL2TP_VPN_IN extended IP access list
permit any any icmp echo
IP 192.168.100.0 allow 0.0.0.255 192.168.101.0 0.0.0.255
IP 192.168.100.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
allow udp any any eq bootps
allow udp any any eq bootpc
deny ip any any journal entryRADIUS-server host 192.168.101.15 auth-port 1812 acct-port 1813
RADIUS server retry method reorganize
RADIUS server retransmit 2
Server RADIUS 7 key...Debugging shows me
234195: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet dport 500 sport 500 SA NEW Global (N)
234196: * 3 Feb 18:53:38: ISAKMP: created a struct peer 93.73.161.229, peer port 500
234197: * 3 Feb 18:53:38: ISAKMP: new position created post = 0x47D305BC peer_handle = 0x80007C5F
234198: * 3 Feb 18:53:38: ISAKMP: lock struct 0x47D305BC, refcount 1 to peer crypto_isakmp_process_block
234199: * 3 Feb 18:53:38: ISAKMP: 500 local port, remote port 500
234200: * 3 Feb 18:53:38: insert his with his 480CFF64 = success
234201: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234202: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
234203: * 3 Feb 18:53:38: ISAKMP: (0): treatment ITS payload. Message ID = 0
234204: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234205: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234206: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234207: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234208: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234209: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234210: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234211: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234212: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234213: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234214: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234215: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234216: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234217: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234218: * 3 Feb 18:53:38: ISAKMP: (0): success
234219: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234220: * 3 Feb 18:53:38: ISAKMP: (0): pre-shared key local found
234221: * 3 Feb 18:53:38: ISAKMP: analysis of the profiles for xauth...
234222: * 3 Feb 18:53:38: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
234223: * 3 Feb 18:53:38: ISAKMP: type of life in seconds
234224: * 3 Feb 18:53:38: ISAKMP: life (basic) of 28800
234225: * 3 Feb 18:53:38: ISAKMP: 3DES-CBC encryption
234226: * 3 Feb 18:53:38: ISAKMP: pre-shared key auth
234227: * 3 Feb 18:53:38: ISAKMP: SHA hash
234228: * 3 Feb 18:53:38: ISAKMP: group by default 2
234229: * 3 Feb 18:53:38: ISAKMP: (0): atts are acceptable. Next payload is 3
234230: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234231: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234232: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234233: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234234: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234235: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234236: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234237: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234238: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234239: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234240: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234241: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234242: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234243: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234244: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1234245: * 3 Feb 18:53:38: ISAKMP: (0): built the seller-02 ID NAT - t
234246: * 3 Feb 18:53:38: ISAKMP: (0): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
234247: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234248: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2234249: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet 500 Global 500 (R) sport dport MM_SA_SETUP
234250: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234251: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3234252: * 3 Feb 18:53:38: ISAKMP: (0): processing KE payload. Message ID = 0
234253: * 3 Feb 18:53:38: crypto_engine: create DH shared secret
234254: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET (hw) (ipsec)
234255: * 3 Feb 18:53:38: ISAKMP: (0): processing NONCE payload. Message ID = 0
234256: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234257: * 3 Feb 18:53:38: ISAKMP: (0): success
234258: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234259: * 3 Feb 18:53:38: crypto_engine: create IKE SA
234260: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_SA_CREATE (hw) (ipsec)
234261: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234262: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234263: * 3 Feb 18:53:38: ISAKMP (0:5912): NAT found, the node outside NAT
234264: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234265: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM3234266: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
234267: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234268: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM4234269: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
234270: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234271: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234272: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234273: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM4 = IKE_R_MM5234274: * 3 Feb 18:53:38: ISAKMP: (5912): payload ID for treatment. Message ID = 0
234275: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 192.168.1.218
Protocol: 17
Port: 500
Length: 12
234276: * 3 Feb 18:53:38: ISAKMP: (5912): peer games * no * profiles
234277: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID = 0
234278: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234279: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234280: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234281: * 3 Feb 18:53:38: ISAKMP: (5912): SA has been authenticated with 93.73.161.229
234282: * 3 Feb 18:53:38: ISAKMP: (5912): port detected floating port = 4500
234283: * 3 Feb 18:53:38: ISAKMP: attempts to insert a peer and inserted 95.6.../93.73.161.229/4500/ 47D305BC successfully.
234284: * 3 Feb 18:53:38: ISAKMP: (5912): IKE_DPD is enabled, the initialization of timers
234285: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234286: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_R_MM5234287: * 3 Feb 18:53:38: ISAKMP: (5912): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
234288: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 95.6...
Protocol: 17
Port: 0
Length: 12
234289: * 3 Feb 18:53:38: ISAKMP: (5912): the total payload length: 12
234290: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234291: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234292: * 3 Feb 18:53:38: crypto_engine: package to encrypt IKE
routerindc #.
234293: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234294: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
234295: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234296: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE234297: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
234298: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234299: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234300: * 3 Feb 18:53:38: ISAKMP: node set-893966165 to QM_IDLE
234301: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234302: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234303: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234304: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234305: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID =-893966165
234306: * 3 Feb 18:53:38: ISAKMP: (5912): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID =-893966165, his 480CFF64 =
234307: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234308: * 3 Feb 18:53:38: ISAKMP: (5912): process of first contact.
dropping existing phase 1 and 2 with 95.6 local... 93.73.161.229 remote remote port 4500
234309: * 3 Feb 18:53:38: ISAKMP: (5912): node-893966165 error suppression FALSE reason 'informational (en) State 1.
234310: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
234311: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234312: * 3 Feb 18:53:38: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234313: * 3 Feb 18:53:39: % s-6-IPACCESSLOGRL: registration of limited or missed rates 150 packages of access list
234314: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234315: * 3 Feb 18:53:39: ISAKMP: node set-1224389198 to QM_IDLE
234316: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234317: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234318: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234319: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234320: * 3 Feb 18:53:39: ISAKMP: (5912): HASH payload processing. Message ID =-1224389198
234321: * 3 Feb 18:53:39: ISAKMP: (5912): treatment ITS payload. Message ID =-1224389198
234322: * 3 Feb 18:53:39: ISAKMP: (5912): proposal of IPSec checking 1
234323: * 3 Feb 18:53:39: ISAKMP: turn 1, ESP_3DES
234324: * 3 Feb 18:53:39: ISAKMP: attributes of transformation:
234325: * 3 Feb 18:53:39: ISAKMP: type of life in seconds
234326: * 3 Feb 18:53:39: ISAKMP: life of HIS (basic) of 28800
234327: * 3 Feb 18:53:39: ISAKMP: program is 61444 (Transport-UDP)
234328: * 3 Feb 18:53:39: ISAKMP: authenticator is HMAC-SHA
234329: * 3 Feb 18:53:39: CryptoEngine0: validate the proposal
234330: * 3 Feb 18:53:39: ISAKMP: (5912): atts are acceptable.
234331: * 3 Feb 18:53:39: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 95.6..., distance = 93.73.161.229,.
local_proxy = 95.6.../255.255.255.255/17/1701 (type = 1),
remote_proxy = 93.73.161.229/255.255.255.255/17/0 (type = 1),
Protocol = ESP, transform = esp-3des esp-sha-hmac (UDP Transport),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
234332: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234333: * 3 Feb 18:53:39: ISAKMP: (5912): processing NONCE payload. Message ID =-1224389198
234334: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234335: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234336: * 3 Feb 18:53:39: ISAKMP: (5912): ask 1 spis of ipsec
234337: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234338: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_READY = IKE_QM_SPI_STARVE
234339: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234340: * 3 Feb 18:53:39: IPSEC (spi_response): spi getting 834762579 for SA
of 95.6... to 93.73.161.229 for prot 3
234341: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234342: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234343: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
routerindc #.
234344: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234345: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
234346: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234347: * 3 Feb 18:53:39: ISAKMP: (5912): establishing IPSec security associations
234348: * 3 Feb 18:53:39: from 93.73.161.229 to 95.6 SA... (f / i) 0 / 0
(93.73.161.229 to 95.6 proxy...)
234349: * 3 Feb 18:53:39: spi 0x31C17753 and id_conn a 0
234350: * 3 Feb 18:53:39: life of 28800 seconds
234351: * 3 Feb 18:53:39: ITS 95.6 outgoing... to 93.73.161.229 (f / i) 0/0
(proxy 95.6... to 93.73.161.229)
234352: * 3 Feb 18:53:39: spi 0x495A4BD and id_conn a 0
234353: * 3 Feb 18:53:39: life of 28800 seconds
234354: * 3 Feb 18:53:39: crypto_engine: package to encrypt IKE
234355: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234356: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234357: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234358: * 3 Feb 18:53:39: IPSec: rate allocated for brother 80000273 Flow_switching
234359: * 3 Feb 18:53:39: IPSEC (policy_db_add_ident): 95.6..., src dest 93.73.161.229, dest_port 4500234360: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 95.6..., sa_proto = 50.
sa_spi = 0x31C17753 (834762579).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1165
234361: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 93.73.161.229, sa_proto = 50,.
sa_spi = 0x495A4BD (76915901).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1166
234362: * 3 Feb 18:53:39: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) QM_IDLE
234363: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
234364: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_SPI_STARVE = IKE_QM_R_QM2
234365: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234366: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234367: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234368: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234369: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
routerindc #.
234370: * 3 Feb 18:53:39: ISAKMP: (5912): node-1224389198 error suppression FALSE reason 'QM (wait).
234371: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234372: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
234373: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234374: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP
234375: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): select SA with spinnaker 76915901/50
234376: * 3 Feb 18:53:40: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234377: * 3 Feb 18:53:42: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234378: * 3 Feb 18:53:44: IPSEC (epa_des_crypt): decrypted packet has no control of her identityAlso when I connect with the phone, I see HIS Active and IPsec tunnel is mounted, but the wire of time tunnel is down and phone connects.
I hope that you will help me. Thank you.
Hi dvecherkin1,
Who IOS you're running, you could hit the next default.
https://Tools.Cisco.com/bugsearch/bug/CSCsg34166/?reffering_site=dumpcr
It may be useful
-Randy-
Evaluate the ticket to help others find the answer quickly.
-
Integration of CISCO ISE with another controller wireless lan of the seller
Hi all!
I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.
Waiting for help!
Hello
According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.
-
Inconsistent WLAN controller with AP 'AIR-LAP1142N-E-K9.
Hi all
We have awireless LAN Controller "Cisco 4402 with software version 3.2.150.10" we use the Access Point 'AIR-LAP1242AG-E' and his works fine, we bought the new APs with the model "AIR-LAP1142N-E-K9" but its not working with our controller and restart continuously. I connected the console and checked the logs from the console that is given below. Please let me know is this controller WLAN is compatible with the APs new or not, or do I need to upgrade the operating system of the LAN Controller and if I upgrade the operating system of the WLAN controller it will support the old APs or not.
Thank you in advance for your response and support.
32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: C4:7 D: 4F:3 A: 9E:D0
Part number: 73-11451-08
Kit numbered PCA: 800-30554-06
Revision number of PCA: A0
Serial number of PCB: FOC14080B1U
Top Assembly part number: 800-31273-04
Top of page the Assembly serial number: FCZ1414W1X5
Top of page revision number: A0
Product/model number: AIR-LAP1142N-E-K9
% Please first set a domain name.Press RETURN to get started!
* 00:00:06.561 Mar 1: * CRASH_LOG = YES
MAC Ethernet address of base: C4:7 D: 4F:3 A: 9E:D0* 00:00:06.749 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized event AP log (contains 82 messages)
* 00:00:08.794 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to
* 00:00:08.810 Mar 1: % SYS-5-RESTART: System restarted.
Software Cisco IOS, C1140 Software (C1140-RCVK9W8-M), Version 12.4 JA (21 a), RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Updated Tuesday 8 June 09 16:28 by prod_rel_team
* 00:12:08.010 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 00:12:08.982 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to
* 00:12:18.211 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.20.20.228, mask 255.255.255.0, hostname APc47d.4f3a.9ed0* 00:12:28.972 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - WS-C3560G-48PS NEGOTIATED (0026.98a6.2786)
Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)Translate "CISCO-LWAPP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)
* 00:12:37.968 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
* 00:12:37.971 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
* 00:12:37.973 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
* 00:12:47.974 Mar 1: % 3-CAPWAP-ERRORLOG: go join a lwapp controller
* 00:12:47.974 Mar 1: % LWAPP-3-CLIENTERRORLOG: put AddressCalled of Transport
Writing of the
* 00:12:47.981 Mar 1: % LWAPP-5-CHANGED: CAPWAP changed State to ADHERE
* Jun 29 16:32:00.616: % SYS-4-PUPDATECLOCK: periodic update clock with ROMMON failed because size left in ROMMON (4294967295), large (29), error code (- 1).
* Jun 29 16:32:00.616: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reason for charging: CONTROLLER INCOMPATIBLE VERSION.
* Jun 29 16:32:00.616: % LWAPP-5-CHANGED: CAPWAP changed state at the bottom of the event log in NVRAM...using the values from the eeprom
WRDTR, CLKTR: 0 X 86000800 0X40000000
RQDC, RFDC: 0X8000003B 0X0000020Finit done DDR
IOS Bootloader - start System.
XMODEM file system is available.DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0 X 86000800, 0 X 40000000
RQDC, RFDC: 0X8000003B, 0X0000020FPCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs [0]: 5 files, 2 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 32385024
flashfs [0]: bytes used: 2271744
flashfs [0]: available bytes: 30113280
flashfs [0]: flashfs fsck took 16 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: c4:7 d: 4f:3's: 9e:d0
Ethernet speed is 1000 MB - FULL duplex
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#######################################################################################################################################################################################################################File "flash: / c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" unzipped and installed, point of entry: 0x4000
execution of...
ENET stoppedIf you have login valid ORC, go to Support > download software > > Cisco Wireless LAN Controller 4402 Wireless > Wireless LAN Controller Software
Release notes for the controllers wireless LAN Cisco and Points of light access for version 7.0.98.0
http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html
Upgrading to a new version of the software
http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp472449
Remember messages useful rate. Thank you.
-
VWIC3-1MFT-T1/E1 on Cisco 2811
Hello community,
VWIC3- 1MFT-T1/E1 is compatible with router Cisco 2811 (revision 53.51)?
Currently, I get the following error:
WIC Slot 0:
Daughter unknown WAN card
Module WIC unsupported / disabled this slot machine
Hardware revision: 1.0
Number of albums part together: 800-34657-01
Part number: 73-13419-01
Review on board: B0
Deviation number: 0
Version of fab: 05
Serial number of PCB: FOC1624628F
Version identifier: V01
Product number (FRU): VWIC3-1MFT-T1/E1
CLEI Code: COUIA7PCAA
History of the RMA tests: 00
RMA number: 0-0-0-0
RMA history: 00
EEPROM 4 format version
Table of contents EEPROM (hex):
0 X 00:04 FF 40 06 00 01 41 46 03 20 00 87 61 01 C0 ED
0 X 10: 82 49 34 6 B 01 42 42 30 88 00 00 00 00 02 05 C1
0 X 20: 8B 4F 46 43 31 36 32 34 36 32 38 46 89 56 30 31
0X20 30: 2D CB 90 56 57 49 43 33 31 4 46 54 54 31 2D
0X40: 2F 45 31 C6 8 A 43 55 49 41 37 50 43 41 41 03 4F
0 X 50: 00 81 00 00 00 00 04 00 03 40 C1 CB FF FF FF D9
0 X 60 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0 X 70 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF #
Thank you very much in advance for your quick responses.
George
Hi George,.
Unfortunately not supported on any series 2800
The Cisco® third generation-1, 2 or 4-channel T1/E1 Multiflex Trunk voice/WAN (MFT VWIC3s) support voice and data applications Interface on the Cisco 1921, 1941 and 1941W (data only) and the Cisco 2901 2911 2921, 2951, 3925, 3945, routers to Services integrated 3925th and 3945TH.
Table 1. Supported Cisco MFT VWIC3 platforms and Cisco IOS Software Release requirements minimum
VWIC3-1MFT-T1/E1
VWIC3-2MFT-T1/E1
VWIC3-1MFT-G703
VWIC3-2MFT-G703
VWIC3-4MFT-T1/E1
Slot machines Cisco 1900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
N/A *.
Slot machines Cisco 2900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
15.1 (3) T *.
Slot machines Cisco 3900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
15.1 (3) T
* VWIC3-4MFT-T1/E1is supported by Cisco 2911 2921 2951 and, routers Cisco 3900 Series
http://www.Cisco.com/en/us/prod/collateral/routers/ps5855/data_sheet_c36-609138.html
See you soon!
Rob
"Why don't the best things always go away."
-The band
-
Cisco linksys router and cannot access the wireless network
We have cisco linksys wireless router. When we installed everything first, we could connect our wireless laptops to the network. Now, however, the network is detected, but there is no access to the internet. We have even a guy from ATT were out and he said that the wireless router has been installed backwards? He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first. We can also connect iPod to the wireless network. They detect the network, but when we enter the password cannot connect.
Hi JC_3094,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, it looks like you aren't able to access the Internet.
The likely causes of this problem is if the router is not configured properly.
Here are some steps that should help you to solve this problem.
Method 1:
Check if the router is configured properly to get access to the Internet.
Method 2:
Try the steps mentioned in this link and check:
This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.
Wireless and wired network problemsMethod 3:If there is a frequent disconnection try to update the firmware on the router and check.In addition, visit these links for more information:Why can't I connect to the Internet?Hope this information helps. Respond us if you have any questions with windows and we will be happy to help. -
What clients VPN Cisco 2811 supports?
Is the solution of VPN Cisco 2811 locked customers cisco or that market with other brands too?
Best regards Tommy Svensson
Hello
With the correct IOS feature set, it will support IPsec VPN clients. This includes not only the Cisco VPN client but almost any standard IPsec client.
In addition, if on the 2811 can accept any browser SSL VPN connections, or even use the AnyConnect SSL client.
It will be useful.
Federico.
-
Can I use your Apple TV with MacBook Air
I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.
Thank you very much.
Can I use your Apple TV with MacBook Air
Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.
SD / HD makes no difference.
You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.
Would be there is always a problem to play these movies 'protected' outside the computer itself?
No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.
Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?
Yes.
Can I use a patch to connect the VGA cable to the port on the computer to the projector?
Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.
-
How to sync mac with mobile air
How to sync mac with mobile air
Cell phone? If an iPhone, iCloud is one way.
On Mac: Apple menu > System Preferences > iCloud > select items to synchronize
On the iPhone: settings > iCloud > select items to synchronize
-
Satellite L875-13D - problem with the installation of the wireless card
Hello
I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.
I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.
I have the same problem with Bluetooth driver that does not work too.
Thank you for your help.
> But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?
Laptop Satellite L875-13D isn t equipped with Bluetooth.
Didn t you know who? -
Lightning to SD card reader is not compatible with iPad air wifi
Apple online store said that the lightning to SD card reader is compatible with iPad air wifi. Having just bought an and I connected it tells me that it is not compatible. Air wifi iPad is on 8.4.1. Is it me or I have the wrong item, or is there a 'procedure' I'm missing? Any help would be appreciated.
Update iOS io 9.2.1 as the new device (it has been updated by end of 2015) should be fine then.
-
a laptop with a Wi - Fi hotspot wireless can use cell phone apps?
a laptop with a Wi - Fi hotspot wireless can use cell phone apps?
Firstly, your computer probably uses an Intel or AMD processor. Only programs using the Intel instruction set have any prayer running on your PC. A cell phone probably uses an ARM or Tegra processor with a set of instructions completely different. There was no physical way for a cell phone application run on a PC.
Second, your cell phone likely does not implement any type of SMB shares, so there is no way that a PC will be able to see it as a device which can be accessed on the network.
Thirdly, the display on the PC hardware is completely different from that of the phone. The application on the phone will include the PC hardware and be able to communicate with the PC drivers in order to interact with the PC hardware. It is simply not possible with a cell phone application, written for the touch screen.
-
Hello
Is it possible to use headphones with XBOX 360 third-party wireless.I have my World of Warcraft, a caseThank youHello
Wireless headsets should work with the XBOX 360.
You can read the following article:
http://support.Xbox.com/en-us/Xbox-360/accessories/set-up-wireless-headset
http://www.Xbox.com/en-us/Xbox360/accessories/HeadsetsCommunication/Xbox360WirelessHeadset
-
Original title: MS Wireless Optical Mouse 2000.
Hi all
A Microsoft Wireless Optical Mouse 2000 work with a 1.0 Microsoft Wireless Optical Desktop receiver?
It will work with a 2.1 Microsoft Wireless Optical Desktop receiver. So maybe the operating frequencies are different?
Thank you
TerrySince then I've been able to solve my problem.
It seems that mouse, when you buy as a set of office, are "coded" somehow work with the receiver for this game. A little logic, I guess.
So thank you for the interest of all.
Terry
-
could not access vb run time for custom action script
I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services. Any ideas?Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also check out this link:
It will be useful.
Maybe you are looking for
-
Installer ask mount point?
I try to install on a MacBook Pro 13 "Yosemite, but it asks for: "a disk with a mount point is needed" Can someone tell me what it is? I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install. He
-
Battery on Satellite L50-A00M problem
Hello I would like to just a few comments on the expected useful life of the battery on my C50-A00M.The computer is a little more than 2 years. It can't hold a charge, and the health assessment aboard Toshiba tells me to replace it.Is it by for the c
-
I use Windows XP Pro and Firefox 41.0.1. Is there a problem with the Java site when you use the 41.0.1 Firefox Version? When I go on the Java site to check the latest update of Java is installed, the box does not analyse the last update. I checked th
-
Do you want to allow the following program to make changes to your computer
Recently, I started to receive warnings of user account settings saying changes will be done on my drive hard when I ask to open an attachment in MS Word. He can't woin allows me to open it to all. How can I stop this from happening?
-
Cisco SCF reports the current scanning Proxy
Dear all, I need a current way of the declaration of the "scanning Proxy. The reason I need it is that a number of users have reported the "Web Security Module" within Cisco Anyconnect is the transmission by proxy on the wrong country. For example, U