My location service does not work properly

Similar Questions

• My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86

  Hello
  My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86 on W7 driver. The problem is no outside speaker and not micro.

  2 things:

  -Why you are using Vista drivers with W7? No, there is no specific driver for W7 (search the website of Acer support for your machine).
  -you will never get full nombreauses for help, these drivers.
  See you soon,.
  Jerry

• View 5.0 unable to communicate 5.0 U1a vCenter - "the service does not work properly.

  This view instance has 4 brokers of the connection running on Windows Server 2008 R2:

  The environment has been upgraded 2 years of view 4.6 see 5.0.  When view 4.6 was used there were 2 additional 32-bit Windows connection brokers in the mix as well, but they were all disabled both in the from view 5.0 5.0 update requires Windows 64-bit. They have been disabled but NOT completely removed from the view.  As part of my troubleshooting this problem, I decided to delete these two brokers disabled connection of the system since it seemed as if they were causing errors in synchronization between brokers.

  Here are my steps, I took this day and in this order as far as I remember the:

  1.) restart vCenterServer services, including the management of VMware webservices

  2.) full restart the server vCenter

  3) Started digging through logs of connection broker to see if something stood in there - found that there was a warning message not being able to connect to https://< vcenterserver >: 443/sdk.  Found a number of articles and posts on the service account no longer works.  Verify that the service account was not locked and that he worked in logging on to the server vCenter via RDP successfully.

  4.) published at the entrance of the vCenter Server View Manager and re-entered the account password and ensure he was still able to connect successfully and that it can.

  5.) other searches on the site of VMware KB and communities find an article indicating that the time on connection brokers can be out of sync.  Double and connected on each of the brokers control the weather was everything in harmony and it is.

  6.) checked to make sure that all LDAP databases are synchronization correctly - this is where I decided to remove former brokers not used environmental and force a replication successful each of the neighbors brokers by using the repadmin utility.

  7.) after forcing replication, I went in a restarted the Mangment vCenter web services again.  -At this point, the connection between the broker and vCenter server came back, but the pool that has a removal pending task has not continued and seemed stuck.

  8.) about 5 to 10 minutes the communication error with the vCenter exploded back up again.

  Also of note, this environment is connected to a different vCenter and working well with no error or stuck tasks.

  Someone at - he of the additional things I should try?

  Thank you

  Jason D.

  Has worked with VMware Support on this and it appeared that the brokers were not quite in sync, even after forced synchronization, I ran previously.  Finish restarting brokers (a both of course) to make things synchronized back to the top.

• VMware View Manager "service does not work correctly."

  Location:

  I have 2 view connection Server 5.1.1 (VCS01 and VCS02) and VMware vCenter 5.0 1 u1 (VC01). The vCenter server is added to the view configuration and works without a problem. I don't use composer in this configuration, and I have a certificate installed, valid SSL on 3 servers.

  question:

  If I could connect the console administrator from view of VCS01 and I change something of the setting in "View Configuration\Servers\vCenter servers" vCenter server, vCenter server service turns red in the dashboard view admin with the status: 'the service does not work properly. This produces a few minutes later.

  

  The setting I changed allowed caching of size on a particular server.

  If I check the log on the second server View (VCS02), I see the following errors:

  714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > VC_OUTAGE:Url [Audit]: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:24.493 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.960 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:25.984 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:25.984 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.985 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:41.111 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 11:42.566 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:42.569 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:42.570 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:42.570 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 11:42.571 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.
  2012-11 - 15 T 14: 11:43.021 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:43.021 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.501 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:44.503 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:44.503 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.504 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:59.630 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 12:01.072 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 12:01.074 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 12:01.074 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.

  Once I reboot VCS02, the State turns green again in the view admin console. So I have a workaround, but I wonder if there is a fix or is it a (UN) known error?

  I had similar errors when I enabled cached host and had to give my user VC the privilege to change the configuration advanced options for guests. It's so she can allow the CBRC in advanced settings. (not in the documentation).

  It seems however, that your VC username missing certain necessary rights. I suggest double check for you rights user VC and take a look at your logs of VC. It should give you some info.

• ATI Graphics Driver does not work properly

  All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
  I have checked all the updates of Windows, said that I installed all available updates. Help, please!

  Hello

  First manually check the updated drivers with ATI and ask their support and Forums on all known
  questions. Use the methods to update the following drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ============================================================================

  Other troubleshooting methods would include the boot minimum and others who might help determine
  the cause and eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• my laptop pointer freezes sometimes and does not work properly

  I have a sony vaio notebook. This pointer does not work properly most of the time, and it freezes. I have to restart my computer to fix it temporarily, but it happens again and again. I wonder if my system is infected with a virus or not. can fix this or I need to recover my laptop. I look forward to your reply. Thanks indeed

  Try to go to the sony web site and get the last mouse and mouse pad drivers.

  If an external mouse, clean and check the batteries if applicable.

  If this isn't an external mouse, try an external mouse and see if the problem persists.

  Then...

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.