My Macbook has big bumps and the screen does not close.  Can it be fixed?

Similar Questions

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• just got a new lenovo y50 and the screen does not come

  Hello.. I had a y50 lenovo a day ago. I loaded and when I turned it on the custom screen shows something... it won't turn... Only the lights on the keyboard upwards
  Thank you

  thx for your help... .but I guessed it was a connection problem... so when I opened, I find that the cable between the motherboard and the screen was loose... then it worked, I saw the language and region settings

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• In-App purchase has been approved and the magazine does not appearon kiosk

  Hello team Adobe,

  I created the purchase on itunes connect app and it has been approved by apple. I published my February edition of my magazine with this com.barasolutions.genevieve.february2015 and up to this time it is not yet available on the app store.

  What could be wrong?  Please answer quickly please.

  Hello

  Could you please contact Adobe DPS company @ [email protected]

  Thank you

  Afonso

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

  original title: Fn + F6 and F7 to adjust the brightness of the screen does not

  The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

  Thank you

  Hello

  1 have had any changes made to your computer before this problem?

  2. What is the number of the model of the computer?

  3. the other function keys work as should.

  Perform the steps mentioned below and check:

  Step 1:

  Check if the problem persists when the computer is in clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

  Step 2:

  I suggest you perform the steps mentioned below and check if it helps:

  http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

  (Valid for all models of Toshiba laptops)

  If the problem persists I suggest you to contact Toshiba to get help:

  http://Toshiba.com/Tai/support.jsp

  Let us know if it helps.

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• Mute icon in the center of the screen does not move and does not remove

  Mute icon in centerl of the screen does not move and I can't remove it. It does not seam to meet what I did.

  Try below before he came.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  
  According to the graphics card on your computer, these can be alternatives.
   
  
  Right click on the desktop | Graphics options | Rotation.
   
  
  Right click on the desktop | Screen resolution | Orientation.
   
   
   
  
   

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• Touchpad on my HP Mini 110-1125NR is locked and the cursor does not move

  I've never locked my computer.  Everything has been implemented in the store where it was purchased about 4 years ago.  I put my computer in sleep mode yesterday afternoon and just tried to use this evening... somehow, the touchpad is inadmissible and the cursor does not move.  He remains in the middle condition of the screen.  I turned off the computer and restarted, nothing done.  Can anyone provide a solution?

  Hello

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  If the pointer is still frozen, try double clicking the top left of the button.

  Kind regards

  DP - K