My mem is not displayed right in windows

Similar Questions

• Microsoft Teredo Tunneling adapter not displayed in the window of adding hardware under common hardware Types.

  I have a HP Pavilion P6 desktop computer running Windows7 and in devices and printers , I noticed that my computer has a yellow triangle that relates to Microsoft Teredo Tunneling adapter.  To address this issue, I note that this device is not displayed in the window of adding hardware under common hardware Types, but I listed it in the Device Manager.

  I tried several attempts to reinstal, but not joy.  Can anyone suggest how I can restore this device?

  In the Properties window, it shows a Code 10.  This device cannot start.

  DM

  Tunneling is required only if you have a printer that requires it.  Here is how to re - install if you do

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.

  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices. If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

• When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  It is a message from the BIOS. You can press F2 and go into BIOS and select "set as default" then save and exit. The PC actually has a floppy drive?

• File extensions are not displayed in my windows Explorer

  I use Windows XP SP2. Since I do on this specific computer software development, being able tp see file extensions in my window of the Explorer would be very useful. I already tried the standard tool > Folder Options > view tab > show the file extensions for known file types to achieve this, but it does not display the extensions.

  It is a big problem for me because when I need to do something with executables of the application that I've done, I have to guess which file is good.

  Does anyone know why my file extensions are not display? Logan Young, hopeful MCPD Web Developer

  You must determine if the computer is really clean. I like Avira, but antivirus programs are not designed to catch non-viral malware. Do preparatory work to get rid of temporary and Temporary Internet Files, describes the relationship I have everything first you gave (and repeated below for convenience), then run MBAM.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Another thing to check - after the computer is really clean - if the problem occurs in a different user account. You will need your colleague to create a test account in the server, then the one on your computer. MS - MVP - Elephant Boy computers - don't panic!

• Chosen PS Actionoption 'Color' is not displayed in the window menu drop-down

  Hello @ all!

  I would like to divide my PS actions with different colors. But if I choose one in the option field is not dispales in the window drop-down action menu.

  What have I done worng?

  Concerning

  Helmut

  Hi Helmut,

  You must change the display Palette of action mode button mode to see the colors assigned to your actions.

  

  Kind regards

  Claes

• fonts do not display right

  I am creating a website with Muse and I need to use Scandic letters. But they do not seem to work. I tried both web and web safe fonts, but the letters still are not displayed. I closed the Muse and relaunced it without success. I use the latest version. In previous versions, I have no such problems.

  The site is www.sumiaispiiras.com I really need help to solve this young.

  Hi Eija,

  Thanks for your update on that. So to sum up, the question turns out to be the encoding of the host used for your files and it must be utf-8 for a generated web site of muse.

  - Abhishek Maurya

• Web pages are not displayed right and can't open certain links

  Facebook doesn't show images. My ATT Yahoo home page is displayed very large. Firefox Desktop page only displays the links on a blank white page. Cannot open links on the desktop firefox page, google, bing, etc... Firefox help page works fine. Help!

  When I did a search on Google for "CSFire 6.0.1" earlier, this thread appeared: I see, looking at the element 'More system details' next to your original message that you also use CSFire.

  I've updated for Firefox 6.0.1 today. Immediately thereafter I started having problems. If I clicked on a bookmark, the browser has not would not navigate to it. In fact, when I opened Firefox, he wouldn't even go to my home page.

  After past and disabling one-at-a-time ALL my extensions, I discovered that CSFire is the culprit. When I disable that, everything works again.

  -Allegedly - nothing is changed in Firefox 6.0.1 bar the revocation of the certificate, I don't know why that should be, but it's still.

  No idea if this will help, but I thought that I'd put it out there on the offchance. Good luck!

• OfficeJet 6500 will not display ink using Windows 7 levels.

  I have a HP Officejet 6500, model E709n wireless. My OS is Windows 7 Home Premium Service Pack 1.  I downloaded and installed the drivers and software.  It will scan and print, but responses to double click on the scan and fax buttons is very slow.  It will not show ink levels.  I get a message that the computer cannot communicate with the printer.  The error message also tells me to check that the printer is on and the usb cable is connected.  Since they are obviously related, there is another problem.

  When I connected the printer to a computer running Windows XP Professional, everything works fine.

  Does anyone have a solution?

  Hey Bob,

  I suggest the doctor printing & scanning HP to see if it is able to solve your problem running. If should be able to recongize any wiring or driver error and solve them for you. If it does not solve the problem, post back with new details and will continue from there.

  Thank you!

  Sean

• BlackBerry Smartphones BB Desktop not display correctly in Windows 7

  I installed BB Desktop 7 on my 64 bit Windows 7 computer.  It works but the screen is all white or all black.  How can I get office display correctly?

  kevin3d wrote:

  I installed BB Desktop 7 on my 64 bit Windows 7 computer.  It works but the screen is all white or all black.  How can I get office display correctly?

  Hello kevin3d

  Welcome to the Forums of the BlackBerry Support

  I suggest to perform a clean uninstall of Desktop Software then re - install again, aid refers to the Knowledge Base:

  • KB02206 : How to perform an uninstall of BlackBerry Desktop software
  • KB16236 : How to install the BlackBerry Desktop Software for Microsoft Windows

• Extension Panel do not display in the window of the InDesign Extensions

  I finally managed to discover Maria Gutierrez' tutorial on building a plug-in. The < sarcasm >demo very cleverly< / sarcasm > does not provide any instructions or a downloadable sample for the manifest.xml file or the < my project > .mxml file. In fact, I had to freeze the image and manually write what I saw in the demo.

  I followed his instructions to copy the bin-debug folder (in fact, it only gives instructions for MAC, and I copied them in the folder 'C:\Users\ < user > \AppData\Roaming\Adobe\CS5ServiceManager\extensions\' on my Windows 7 according to the "using the Adobe Creative Suite 5 SDK" PDF.) I also set the registry value to enable debugging.

  When I opened InDesign, I couldn't see my extension in Windows-> Extensions.

  However, if I copied the extension directly in the file "D:\Program Adobe InDesign CS5\Plug-Ins\Panels", the extension has appeared in the list and worked fine.

  I csaw_indesign.swc refernenced correctly in my list of libraries and < host name = "IDSN" Version = "7" / > in my manifest.xml.

  I'd appreciate some help here.

  TIA

  mlavie

  Have a look here:

  http://www.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/CS_SDK_Guide.PDF

  Looks like your manifest file has errors or is in the wrong place.

  Bob

• Colors in CS5 do not display right... ?

  I usually use CS4 at school, but I'm doing something that is due tomorrow, and I was able to download CS5. It seems that this is pretty much the same thing, but I can't get the colors to work right. It seems that he wants everything to be in CMYK, but I am more familiar with RGB. As I try to make a square with R = 0 G = 255 = 0, if it should appear as a bright green, just like this, but it turns out really dull, more similar to this. It has a similar effect on all colors. The colors only, it does not appear to affect are the pre-made nuances. But if I try to make my own shade, he still has problems. Although, if I do a CMYK swatch, it works very well, but not all the colors seem to be available with CMYK. Bright green, for example. Red. Cyan. Blue. Yellow. All the basic colors. I can't use them! Help!

  You can set the colors in RGB or CMYK. In the color Panel, choose the mode for cursors and the color ramp in Panel context menu. From the Swatches palette, choose new swatch of color... and define the type of process and the color on the model mode desired.

  If you work in RGB, you must also change > merger of transparencies space > statement RGB.

  Is this going to print? These really bright colors can be produced in print without using spot color inks.

• scheck selection boxes are not displayed in the window options, nor does the scroll bar - why?

  Firefox is very erratic running. Scrolling is choppy at best. Usually, rocking it and descend is too far or no movement at all.
  Also, the scroll bar is black and there is no visible grab buttons to go up or down. Up and down arrows at the top of the bar are also blacked out.
  Selection boxes do not appear in tools, Options. Therefore, it is very difficult to make the custom choices.
  There is a significant delay after clicking 'OK', 'Cancel' or 'Help' buttons-, in fact, other buttons.
  I have 2 Add-ons 'All-in-one Side Bar' and 'Last Pass', no more.

  If I open firefox in safe mode all these problems disappear. Everything moves smoothly and check boxes appear.

  Have you tried to change the default Firefox theme, if you are using another theme?

  Have you tried disabling hardware acceleration?

  All this is in the article link I posted.

  Find out what steps to follow when the problem occurs in Mode without failure of Firefox, according to your original question and follow the links in the next section of the article.

  • See - https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems#w_3-restart-firefox-in-safe-mode

  See also - https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems

• Hidden not displayed in the window 2008 R2

  In the window Server R2 I have 40 GB partition this partition usage is up to 25 GB now the point is while I select all the files hidden and consulted and indicated his total record size 17 GB. I unchecked all option hidden the folder option but I couldn't rectify 7 GB of files where it is? Help, please

  Hi arshkumaR,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• MAIL application does not display hyperlinks in Windows 8

  It's so boring

  I can't click on the links

  Hello

  Are these online web article links?

  As a work around to try to send an email to yourself with hyperlinks.

  I suggest you to set Internet Explorer as the browser by default and then check how it works.

  Check out these links to find out how to set default programs in Windows 8.

  Choose the programs Windows uses by default

  Program access and computer by default

• pictures are not displayed, just white windows appear instead of pictures.  Information on the images appear.  I use Windows 10

  Good evening.  My lightroom shows white instead of the images.  It presents information about all images and appear as images were shown.  I use windows 10.  Is someone can help me?

  Double post; See my response to your other post: Re: after importing into Lightroom, my pictures appear as white squares - no image. [was: Ned Help!]