My Microsoft a sluggish wireless mouse click response

Similar Questions

• \Microsoft 700 v2 wireless mouse and the keyboard does not not after upgrade

  installed windows 8 after install to customize exactly the point of putting up wireless mouse and keyboard no longer works has had to use keyboard.to and wired mouse usb finish install. Still does not work after restarting.

  Hello

  I'm sorry to know that the keyboard and Microsoft mouse do not work on the Windows 8 operating system. But we can fix that later article, which gives a few steps on how to solve the problem of mouse and wireless keyboard.

  Please click on the following link and follow the steps. http://support.microsoft.com/kb/838398. This article applies only to the hardware devices that are mentioned in the properties. Please make sure that your keyboard and wireless mouse is referred to as properties.

  Hope this should solve the problem. If you still have the same issue, just reply to us and we can help you better.

  Thank you

• try reinstalling Microsoft keyboard and wireless mouse 1000 on another computer.

  I have successfully used the keyboard or the mouse on another computer.  This time my computer recognizes the receiver, but I can't get the keyboard/mouse to synchronize with the computer.  I am running Windows XP.  Thank you in advance for your help!

  Hello hiring,

  Thank you for your message.  You may need to consult the manual for these devices, but there is probably a connection button on both devices that put into a discovery mode.  Have you already tried that?
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I would add a wireless keyboard to a 'double Receiver USB' for a wireless mouse.

  I have successfully installed the small 'Inteli-mouse' (microsoft mobile 6000 wireless mouse) by using the center of update online that I was sent to when I inserted the installation CD. I like the small USB receiver, is it possible to update the driver, so I can also use my "Microsoft Wireless Keyboard 700 V2.0" with this USB receiver? I am running "Windows 7 Home Premium 64 bit on an HP G71 laptop. I like the wireless keyboard because the screen is great & because of some physical problems I can keep the keyboard closer to me and the screen further when the House. It's not important, I wondered? Thank you, KC973

  Hi KC973,

  Welcome to the Microsoft Answers site!

  You will not be able to add a wireless keyboard to a 'double Receiver USB' for a wireless mouse. To use the wireless keyboard, you can use the receiver that came with the key board and the receiver double USB mouse will not recognize the wireless keyboard.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• mg wireless mouse - 0637t

  I am currently using a mouse without a wire number mg - 0637t and scroll wheel doesn't behave very well. Can I buy a replacement, and if not, what would be a suitable substitute?

  Hello

  There are many wireless mice around. Depending on your budget, you can buy in any store of the computer. I use Microsoft and Logitech wireless mouse. They are the most reliable.

  Kind regards.

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• Microsoft 1025 standard wireless optical mouse model

  I have a microsoft 1025 standard wireless optical mouse model. The right button has stopped working. Is used in conjunction with Microsoft Wireless MuliMedia keyboard 1.1 model 1014. They came as a package. Have removed the mouse cktbd switch and tested for continuity. Test failed. Others have found in the forums with similar but not same prob.

  Here are a few solutions that I came up with.

  1. New mouse and wireless keyboard (really don't want to)
  2. Replace the switch if possible (can do if I can a provider)
  3. Use the mouse to odifferent if same freq (not likely)
  4. Purchase used one, if one is (also unlikely)
  5. Suggestions appreciated

  If anyone has any other suggestions, they would be really useful.

  Thank you

  Rhamnar86It

  I solved this by disabling the BUTTON to the RIGHT.

  Open CONTROL PANEL

  Click the installed mouse

  and CHANGE the SETTINGS

  Also try to UPDATE DRIVER

• Microsoft wireless mouse 6000 v2 just stopped working

  I bought 6000 Microsoft wireless mouse and keyboard a year ago and just mouse combo has randomly stopped working.

  I turned off my computer and the next day it turned on and the mouse does not work now.

  -J' put in new batteries and re-synced it and who did not

  -J' tried to connect on the other USB ports, which did not work

  -J' reinstalled the driver, who did not work

  -J' tried it on my laptop and it doesn't

  I think that my warranty has expired as well.

  Microsoft please help, there was no sign of him dying off the coast, and I don't see what anyone who would have triggered this.

  It just seems odd that one day that shut down you your computer, and the next day your mouse does not work.

  Hi BrandonBB,

  ·         Remember to make changes on the computer before the show?

  ·         You receive an error message or error code?

  I suggest you follow the steps in the bottom of the article in the Microsoft Knowledge Base to resolve this problem:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know if it helps.

• Microsoft Wireless Optical Desktop 1000-keyboard and wireless mouse Combo does not

  Hello

  I use the 1000 desktop wireless for about 1 year now.

  Now the keyboard works intermittently and the mouse works almost not at all.

  • I get no error message at all.
  • I tried to replace the batteries too, but no luck there
  • I have replace the mouse & keyboard USB those...
  • The works of the mouse and keyboard not juicing!
  • I have all ports USB 8 occupied on my PC
  Is there a conflict of port here?
  Any help would be greatly appreciated

  Hello
  have you checked the Device Manager to find mistakes a yellow "!" or red ' x'
  http://support.Microsoft.com/kb/310560/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Will be a work of Microsoft Bluetrack Wireless Mouse 5000 with a Microsoft 3000, 4000, 5000, 6000 USB mouse receiver V2.0?

  I have a Microsoft Wireless Mouse 5000 to set keyboard/mouse Bluetrack. I need a new transmitter/receiver for the mouse as the keyboard is connected to another computer and using the transmitter/receiver provided with the set. My mouse works with a different transmitter/receiver?

  Hello

  1. you have the Microsoft transceiver?

  Try the steps below to connect to Microsoft Transreciver.

  (a) press and hold the Bluetooth button on the bottom of the mouse. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.

  (b) on your computer, open the Bluetooth software. The Bluetooth software is usually found Control Panel in the start menu. For more information, see open the Bluetooth software below.

  (c) in the devices tab, click Add

  (d) follow the instructions that appear on the screen.

  (e) If you are prompted for a passkey, select no password. The Microsoft Bluetooth mouse devices do not work with a random passkey.

  You can see the following article for more information:

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  If you use a third-party receiver, you can consult the following link and check.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/76eea589-C264-4e7d-81A9-9b918ef9ffe6

• How to install a wireless microsoft on a computer mouse hp laptop

  I have a mouse microsoft wireless I want to install on my computer hp laptop, which only numbers on the mouse are on the bottom and the are91LP0177 OR the CE0560

  Hello

  ·         What is the model of your mouse?

  I suggest you to install the Intellipoint software. Do follow link below:

  http://support.Microsoft.com/kb/838398
   
  How to sync the mouse with the bluetooth dongle

  (a) turn on your computer and insert the installation CD in the CD drive wireless mouse.

  (b) wait until the CD starts automatically. If not, click 'Start', then 'My Computer', then right click on the name of the CD, and then on "Play".

  (c) follow the instructions on the screen to install the software that came with your mouse. When finished, restart the computer. This will end the process of installing software.

  (d) stop once again your computer and install fresh batteries in the mouse.

  (e) plug the receiver into a USB port on your computer and re - turn on the computer. Your mouse is now ready for use.

• Microsoft Wireless Mouse 700 v2.0

  My wireless mouse was double clicking when I do a left click.  I changed the batteries and adjust the settings of the mouse to no effect.  Is there anything else I can do to fix this problem.

  Hi Ciao1971,

  You can follow the steps in the link below: Troubleshooting the mouse double-clicking when you single click:http://support.microsoft.com/kb/266738

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Wireless Mouse and keyboard Natural Keyboard Combo

  I have a combo of Microsoft wireless keyboard/mouse and the mouse went bad.  The mouse went bad and I replaced the mouse of this combo with a standalone Microsoft wireless mouse.  The stand-alone mouse and the keyboard/mouse combo are both connected via USB.  From the start and a few other times randomly, my mouse goes haywire.  I open the Device Manager and see that there are 2 "mouse HID-compliant" items listed (I presume because of two separate USB connections) - I right click and uninstall one of them (or the other, it's not serious) and the problem is solved.  Unfortunately, at startup or at other times, the same problem happens again, and I solve it the same way.  Short of buying a new keyboard, is there a way to fix this permanentaly?

  I don't think that you need to plug the new mouse, it should work on the original sensor.

• Microsoft 2000 not recognized wireless mouse - code 43

  wireless mouse worked for 4 days - so not recognized and recommended to change the device - problem with the code 43 - it is brand new - 2000 microsoft wireless mouse.

  It's the same thing with my previous microsoft mouse.

  I am so frustrated with this - strangely, I bought a wired mouse to my local supermarket (Asda) for £6 and it works perfectly.

  Hello

  Run the troubleshooter from the link below and check if it will help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  You can also try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• How pan in AutoCad with a Microsoft Wireless Mouse 5000

  I'll try to find how to turn on panoramic in AutoCAD by holding down the wheel with a Microsoft Wireless Mouse 5000

  Determination wins! I found the solution. Go to your devices and printers, and select your wireless mouse. Then select configure my mouse. Then select the link edit the Microsoft mouse settings. In the basic settings select the button on the wheel and select the option 'Middle-click '. After you make this selection, the mouse x and the keyboard focus screen and select 'apply' on the mouse properties screen and select ok. This helped my wheel button be held down and use the "pan" in AutoCAD.