My MSFT mouse clicks two times I click only once

Similar Questions

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• Worm: 38.4.0 e-mails have two date & time others have only once?

  This has also occurred on the previous 2 versions of the T-Bird
  There is no model that I can identify as an email from the same sender will show both ways.

  I have the column set to Date.
  

  I really want the date and time to show all emails.
  Thank you

  Yes, the messages of today date is not displayed. It is all about the largest (and IIRC all of the future.)

  You probably captured this image today, 3 December 2015? Thus, it shows the date for messages which have been dated yesterday and the day before etc. Tomorrow, it will add the date to the messages that arrived today.

  Once you got used to the absence of date which means 'today' you will begin to appreciate the ease with which allows you to identify recent messages.

  You can change it. http://KB.mozillazine.org/Date_display_format

• I would like to be able to open two windows to browse only once, there are too many tabs if there is only a single window.

  My laptop just put update for Windows 10. A previous version of Firefox I open multiple windows at the same time.

  New window = < control > N
  or, right-click on a link and select open in a new fenΩtre

• Why my calculation at the time loop repeats only once?

  I have a series of simple calculations (multiply, divide, add, subtract) occurring in a while loop based on input data on the front panel of the user. The results are then connected to local variables that alter the parameters of a signal generator in one another while loop.

  The while containing the iteration of repetitions one calculation, unless I turn the button "Highlight execution" in which case it repeats until the loop is stopped as I expect. With the 'performance highlight' button and using a probe to check instead of the loop does not repeat itself.

  Another while loop with the signal generator allows to reproduce, but uses only the values which were concluded before the VI began to run.

  I need the VI to be recalculated each time a value on the front panel is changed and change the output of the generator signal accordingly.

  What Miss me?

  Because local variables are fixed on the LEDs that are in the position it after the end of the VI it runs correctly the first time and only executes a forward iteration to stop, all in a loop containing calculations, if you run the VI more than once. As long as the LEDS are in the off position when the VI is launched then everything works fine.

  Thanks for the advice, everyone.

• (Often ignored) not properly accepted mouse click

  Summary: mouse clicks are often not accepted.

  Products: Wireless Intellimouse Explorer 2.0 (1007), Wireless Natural Keyboard (WUR0385) multimedia, wireless receiver 2 Optical Desktop. 0 to (1019)

  This problem appears similar to screw "mouse click and Audio does not not in Windows 7 after updates - must open the Task Manager to work again ' in that these used to work properly, but don't not after updates.

  Behavior: at the start of Win7, the mouse works. At the time where that Win7 is ready to connect, the mouse no longer works correctly. The pointer of the track with the movements of the mouse properly and the keyboard works correctly.

  Overview, all that is under the mouse pointer lights up. It is precisely the clicks that do not work. To operate, I have to do two things: (1) click repeatedly or (2) move the mouse, click on as I move it. This would suggest that I have a race situation between the input with the keyboard devices, winning unless the mouse is active. Mouse clicks are also a priority lower than that of the mouse movement.

  I tried to uninstall/reinstall the Intellimouse driver and software, from the Task Manager and safe mode.

  Thus, it seems that there is a problem with "Focus".  It seems that for some reason, Explorer.exe to focus every time that you click, which makes the current window isn't clicked outside.  This could be caused by a conflict between your touchpad driver and your laser mouse?  try to disable the touchpad in Device Manager.  test the mouse... then vice versa and let know us how it goes.

• Mouse click initiates not the selected action

  When you use safari 9.1.2, by clicking on an option (for example "advance to the next page") on a website does not result in the proposed action. A "drop-down list of the option" unnecessary and undesirable appears instead. I have to click on the desktop out of the active page and then go back and open the selection again, often several times before the mouse click allows selection. What's wrong? How can I fix this problem?

  Try the boot without failure and tests.

  Boot mode safe. https://support.Apple.com/kb/PH21875?locale=en_US

  Same problem in Mode safe?

• How continually increment while the mouse click now

  The attached VI increments a number to each mouse click.  Is it possible to increment permanently with the structure of the event and now the click of the mouse?  For example, if I want to increment the counter from 1 to 100, I don't want to have to click the mouse 100 times, I just want to click once and hold.

  Here's a slightly simplified version which removes some code duplication.

  (Note that both Tim and I have placed before the structure of the event mark.) This eliminates the need for the reset operation).

• Do a right mouse click on the name of the file causes Windows Explorer stop.

  Do a right mouse click on the name of the file causes Windows Explorer stop.

  The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

• funny behaving USB mouse: doing double click even when I press only once

  my mouse behaves funny recently: pretty much whenever I do a click, the result is a double click. When I press for one second and then release the mouse button, I often still get (not) the disiredc simple click... it's on windows, all programs.

  Windows XP, SP3, all installed updates
  Mouse USB (no name)
  my PC has 4 ports USB 1.1 on the integrated controller, I installed a USB 2 control with still 4 ports a year.

  I tried different settings of the mouse (click on the gear, etc.): same problem
  I plugged another mouse (newly purchased): same problem
  I plugged the mouse in all USB ports: same problem
  I plugged the mouse via a USB/PS-2 PS/2 adapter: same problem
  I started a Linux system: same problem
  My scanner (USB; Canon) begins behaving irregulars as weel: during a scan, it constantly stops and then restarts...

  Should I assume that some conflicts between the two USB adapters, as shown in the eroor with a different OS as well?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you use the Scanner?

  Method 1:

  See the article and try to run the fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to update mouse drivers and scan and check if it helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Left mouse click whith the keyboard

  Hello

  Is it possible to do a left mouse click whith the keyboard?

  Thank you Jacob Lykke Sørensen

  Hello

  Is it possible to do a left mouse click whith the keyboard?

  Thank you Jacob Lykke Sørensen

  Hey Jacob Lykke Sørensen

   
  see if the information below helps you
  http://www.Microsoft.com/enable/training/windowsvista/MouseKeys.aspx

  Walter, the time zone traveller

• Slow response to the combination of keys or mouse click

  reaction time on a combination of keys or mouse click on may be on 5 minutes.no other jobs being able to develop undertaken.am beard waiting for movement

  Original title: slowmo.reactions

  Hello Bryan,

  Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If YES, then you did important equipment or modifications to the software on the computer before this problem?
  2. What is the brand and model of your system?

  The slowness of your system may be due to various reasons, including viral infections, interventions of third-party software or a hardware problem with the mouse or the keyboard. So, to refine the diagnosis, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode http://Windows.Microsoft.com/en-in/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Method 2:

  The issue may be due to an infection by the virus. So, you can also run the Microsoft Safety Scanner to make sure that the computer is free of infections:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For more information, see:

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Simple mouse click randomly acts as a double click

  For some time now, on my system, whenever I click (left or right) with my mouse, it works as I double-clicked. It is a random behavior and is not always the case.

  Sometimes I can go a few minutes without getting that kind of behavior, but it seems that the more I use my mouse (click wise County), gets this more aggressive behavior. It generates a lot of click mouse (and high-low) messages from windows with a single click.

  By dragging the items with the mouse or the selection of several elements with the mouse has become a nightmare. When I click and drag the mouse on the desktop for the selection rectangle, it breaks and restarts the selection several times until I come to the end of the selection rectangle.

  I don't know that this is not a problem with the mouse device. I have faced this problem with mouse devices replaced, too. Looks like a virus to me. I used a lot of free anti-virus and analytical tools to scan my computer for viruses. Some of them detected a few threats and I removed all threats. I regularly run windows Defender (complete analysis) every week, but he found nothing. I even install AVG (2013) test and scanned my computer but none of these tools have been able to eliminate this problem.

  I also deleted and installed the drivers, restore by default and so on.  Early on that I thought mouse click Springs had failed, but managed to eliminate this possibility.  Virus cleaning etc is also without effect.  (Microsoft virus tools, btw, are probably the most useless; they rarely or never found anything).

• Is it possible to record mouse clicks by using a script, so it can be used in an action?

  I'm doing an action that aligns the tool clone between two identical images stamp. To align the Clone Stamp I first alt-click on the image source, Ctr-Shift-Tab to return to the destination image, then click on the left button of the mouse.

  The action is not able to save the last mouse click. Would it be possible to create a script which gives a left mouse click on and then bind that to a button so it can be inserted into the action? In fact, I think that it would also have to include the part of "alt-click on ' so, because even though I can save this step in the action, it seems not work if I manually and then create the left mouse click on (IE, images are not aligned properly).

  The steps that I have in my work are:

  1 double 1 document

  2. Select duplicate and set the radius 1 pixel (using a preset)

  and what I'm doing now is manually alt-click to select the source of duplication, then ctrl-shift-tab to return to the destination document and then left click mouse. Is it possible to click alt + mouse click, ctrl-shift-tab, so that it can be inserted into the script action?

  In an action, you can save strokes if you do not install the scriptlistener plugin. The option will be grayed out if you install Adobe plugin scriptlinener.  Actions that do not use this option can save its tool use, but stocks don't work well on the same size documents.  You may be able to switch between two open documents with document previous and next steps in such an action.  I have install the scriptlistener plugin lose the ability of tools Records is a small loss. IMO. I think that the two short cuts could be use Ctrl + Tab and Ctrl + Shift + Tab should be able to be registered for previous and next, they seem to record for me.

  

• Cartoons - mouse clicks does not not in dialog boxes

  Hello

  The contents of a dialog box that open in Animate is non-responsive to mouse clicks. For example if I opened the box of the Document settings and then I can not click on the options or change the size of the document, even if the buttons etc meet (highlighted) when my pointer passes over them, they do not meet the clicks.

  This a CC animate freshly installed, this problem occurred the first time I opened it. I uninstalled and reinstalled and handed over running my PC but the problem persists.

  Any help would be appreciated!

  Thank you!

  reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html