My name is Raymond Monson who is deaf cannot hear your voice now. Please call my phone [deleted kglad] with the video relay interpreter.

Similar Questions

• Photo Loader deletes files with the same file name

  A few days ago I imported a number of photos and videos from my iPhone to a specific folder on my MBA by using Photo Loader. Tonight, I imported again a number of photos and videos in this folder, only to find out they were not imported after all as the file names already exist. Apparently, iOS uses IMG_xxxx.xxx for all that is shot with the camera and always uses the next available number. So as I had already IMG_0618.JPG in this case, she has just imported this photo, but that the flag has been verified, he took the original iPhone itself.

  As they have not been removed by interaction on the iPhone, but by means of Photo Loader, they don't pop up under "recently retired" and the device with third-party scanning software also has been failed.

  I have recovered the photos via photostream but am always desperate to find one or two movies that I shot. Any thoughts?

  Never mind... For some strange reason, the photos have been transferred to the location of default images.

• Name of the contact phone no. smart blackBerry during the next call - only phone number is on the screen but without the name of the contact.

  Ciao,.

  do you know how to solve this problem, probably I incorrectly somethings?

  Thank you all

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.

  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.

  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.

  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.

  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• Who remembers the name of a set of Japanese tile that came with windows 98, or came with the windows over the package?

  Who remembers the name of a set of Japanese tile that came with windows 98, or came with the windows over the package?

  Hello

  The set of tiles you speak: Desktop Taipei. This game is built with Windows 98.

• I want to remove the names of registered users who are wrong and in some cases include the pword... alterations.

  Among the usernames being saved are errors... so when you enter the username box, I get a "list" of names of users. A couple username + password because apparently has not seen that the tab key did not move the slider and it was just marked on the user name. I wish I could delete or reset the user names. Questions from the forum deal with saved password, but I did not save any of my passwords and user names are automatic, unless I disable history research and form "Save". Any suggestions?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list with the mouse or the cursor key
     do not click with the mouse or press the Enter key
  3. Press the DELETE key (on a Mac: shift + del) to delete the highlighted entry

  You can also check the Manager mot de passe for registered user names and passwords.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • https://support.Mozilla.org/KB/password-manager-remember-delete-change-passwords

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Records videos of user accounts keep automatically replace it with the wrong name

  On my Windows XP computer, there is an account called user owner (an administrative account that exists by default on this computer) and two other user accounts that have administrative rights.  For some reason, the other accounts in addition to owner have their videos files labeled as 'The owner Videos.'  However the content of these files do not belong to the owner.  When I in the other profiles besides owner, 'videos of the owner' changes 'My videos', just as it is supposed to.  Windows Explorer in these other profiles also revealed as the owner account records of users other videos are titled 'The owner Videos.'  Videos of the real owner file is displayed correctly, so I don't understand why the videos of other users not displayed right.  Change of name does not help, just ask.  Removing the wrong accounts and re - create does nothing, either.  What should I do now?

  Never mind.  I solved the problem.  Using Windows Explorer, I went to all video files of users who appeared as videos of the owner.  The address bar should be activated for this.  At the end of the address in the video folder, I added the following text: \desktop.ini.  Thus, for example: C:\Documents and Settings\Sample My Documents\My Videos\desktop.ini.  He grew the notebook with all the information on desktop.ini.  I looked at the text and came across the problem.  Line 6 owner = owner said.  I changed the text to this line to tell owner = sample user.  I saved the change and the videos folder has been fixed to be labeled as 'Videos of the owner' to 'The sample user Videos.'  I used "Sample user" in this post to indicate to users other than the owner who all had the problem.  I repeated the same thing for the files of other users.  I know that this probably will not stop future created user accounts get the wrong name for the records of videos, but at least I know how to fix the problem after it is already in place.  The same fix can be applied to images, music and other personal records that are mislabeled.  I hope this works for someone else who runs into this problem.

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• Is droid - possible to separate people with the same names?

  My list of contacts and Facebook was related, but I have friends that have the same names and is there a way to separate contacts in a way people list? Help, please.

  When you look at the contact (I assume that the two are joined) you can select the menu and 'change '. Once you have "edit" on the screen, see if there is a "Separate" menu item If so, who should take care of it.

• I have two folders in the same subdirectory with the same name. How to remove the extra folder?

  I have 2 directories "documents" located in the same directory. They are as well located in C:\Documents and Settings\ [user_name]------directory. Duplicate folder is automatically updated with the same file names when I add files in the original folder. It looks like a pointer to the original folder, when I try to delete the duplicate directory. I get the following error message.

  Can't delete My Documents: it is used by another person or program.
  Close all programs that might be using the file and try again.

  I deleted all files in the directory, rebooted the computer and attempted to delete the now empty folder and I get the same error message. Can you help me remove this duplicate folder.

  Note:
  ------

  I am not able to rename the duplicate folder... If I try to rename, the original folder is renamed... But not the duplicate. Also the duplicate folder becomes empty (since it runs a pointer to the original folder, when the double original of renowned gets is empty)

  Mager

  In Windows XP, all user folders were located under the C:\Documents and Settings folder.

  In Vista , all user folders are located under the folder C:\Users .

  Vista Documents and Settings folder is not a real file it's a junction folder that points to the Folder C:\Users.

  A junction is as a shortcut that points to another file, that is why these records have a shortcut (arrow) overlay icon. In Vista, the only reason why the Documents and Settings junction is for the old installers who are looking for a Documents and Settings folder. When they try to access the folder Documents and Settings, the junction in silence re - runs Setup to the C:\Users folder.

  The default permissions for the Documents and Settings junction is access denied, even for the administrators of .
  
  The only way that a user can access this file actually is if the access permissions have been changed.

  For a more detailed description of this topic and a list of all the junctions see the following Web site.

  Windows Vista Junction Points:
  http://www.Svrops.com/Svrops/articles/jpoints.htm

  I recommend that you move all your files and immediately stop using the Documents and Settings folder to avoid more problems.

  If this just started recently, I recommend that you use the system restore back to a point before the documents and settings folder was first access.

  Ronnie Vernon MVP

• With the help of blackBerry Smartphones as a Textphone for deaf

  Hello

  I'm really interested in the private Blackberry because it has a physical keyboard and can also run android applications.  I wonder do you know if it will run without a doubt the next generation text relay service app for the deaf? as it would a great compact minicom/textphone.

  http://NGTS.org.UK/

  This application is available for free in the game of google (called NGT Lite) store.

  Also. I have currently a phone Samsung S4 is the same type of SIM as the PRIV would use? I'm with giff gaff... I would be able to share package data with my biggest Samsung Tab Pro if necessary?  (I can't read the Web pages on a screen that is smaller, much easier on the 12.2 "display).

  Finally... She has the same accessibility as the old Blackberry Storm had with prediction of words and the ability to take "shortcuts"?   IE, affect entire sentences to an abbreviation as this feature in particular would be great to have to quickly give details by phone where it should be mentioned the address and the same every time for example.  .. or implement the introductery sentences before calling to save time. and speeding up call for example rp = "Hi, I need to order a prescription repeat it please", fn = sends name meds = sends a list of what I I need drugs etc.

  It would really speed up communication of phone for me, as my old minicom has no features as what you have to type everything letter by letter and companies have stopped making them or brand new more, it seems.

  Thank you

  Kati

  Yes! the IVR BlackBerry is running Android Lollipop.

  I love the button. you're probably clicking the wrong button. Click on the button like on the bottom of the post you want to love. you were probably by clicking on the custom text on my post. See the image below

• PlayBook: Problems with the names of the packages containing points of bb10

  Hello

  I wore my 'Medicine Cabinet kids' app for Android. In the "manifest. MF' according to the name of the package is: de.ebsonline.medicinecabinetchildren.

  Meanwhile, I've been thinking that app using WebWorks and he signed with the same key and the same name of package to BB10 for Android.

  At that time, I thought, the application could be the same for BB10 and Playbook. Unfortunately it is not the same. Some customers bought for the Playbook and get installation error 0008.

  As a result of a notice of @oros here in the forum, I tried to create a special version of the application for the playbook. But the problem is, I'm not able to create the same name package, because for the playbook, the entry in the file config.xml may not have the points and there seems to be a limit in length.

  Accordingly, it seems that I am not able to create a new version with the name of original package of my application for users of the playbook, who have already purchased the app and cannot install it! But I don't want to create an entirely new application, because that would mean losing my real clients.

  Could you please give me a hint (or a solution step by step, if possible) for this problem?

  Thank you very much for your help and best regards from the Germany

  Rolf Eschenbach

  I found the following

  Use a naming for short in the field id = like this at the beginning of the config.xml file

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "1.0.0.1" id = "compeardoxgreatapp" >

  The BB10 I give it an id of com.peardox.greatapp

  There is a limit on the number of characters a Playbook may have in the name of the package resulting (50 as I remember) - I guess we have about 18 for our own use

  You don't have to use the reverse DNS, but it is easier for compatibility for the configs in need - just missed the points for PB

• I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously, I had started to put these in Lightroom but decided to change the line

  I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously I had successfully started putting these in Lightroom, but decided to change the format of deposit and deleted (I think) all these previous efforts of Lightroom. On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  Robert alanb48311052 says:

  On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  The Destination Panel does not appear? Try right click on one of the other names of Panel on the right side of the import dialog box and select Destination.

• Why the name of the file appears briefly at the bottom of the video when I export?

  When I export media, the video file displays the name of the file at the bottom of the screen briefly at the beginning of the video. I want to delete this useless title, how do I do this?

  Who is likely to be a function of the FILE READER.

• Creating an element indicates the element with the name already exists

  Hello dear,
  
  I'm on R12
  
  We are to modernize a few standard Link elements that weren't before. So I end of all the links in the element and then end the element as 31-dec-2012.
  I am trying to use the same element of 1 January 2013 and set it as a standard binding element, but it is throwing an error indicating that the element with the name already exists
  who is reasonably.
  
  My requirement is that I wanted to use the same element name and set it as a standard link. I can do this.
  
  Your entries are highly appreciated.
  
  Thank you

  You can go the previous day, press Delete again, and select Remove next or all future changes