problem of controller Xbox 360 windows

Similar Questions

• Problems of controller XBOX 360 using Vista PC

  I bought an XBOX 360 Wireless Controller to my PC which is Vista 32. It worked at first and now it does not work... There is a lot of ppl with this problem with no will... Please help?

  cuzandlisa,
  I have not had this problem myself.  But you might want to look at the troubleshooting on the Xbox site.
  This page is especially for the Xbox to the PC controllers:
  http://support.Xbox.com/support/en/us/NXE/hardware/accessories/accessoriesforPC/ControllerforWindowsList.aspx

  Hope that gives the info you need.  FYI: My first thought would be to uninstall\reinstall the driver.  Also make sure that your PC is up to date with updates.

  Windows 7 was not my idea, but it still rocks! Soli Deo Gloria!

• Wired Controller Xbox 360 Windows 8. How to operate without the xbox 360 turn on do you get?

  Windows 8 recognizes the controller. I have to do something special with regard to the implementation of the controller? I have to disconnect the xbox360 so it does not start it.

  Thank you.

  Check this box

  http://support.Microsoft.com/kb/933710

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.

• Connect xbox 360 Windows 8 controller

  I'm trying to connect my xbox 360 controller to my Windows 8.1 by the power cord.  I downloaded the required driver ( https://www.microsoft.com/hardware/en-ca/d/xbox-360-controller-for-windows ) and the controller is recognized under devices [A], but it is not recognized as a controller under devices and printers [B] or he appear in joy.cpl or work in games.

  

  A                                                                     B

  Things I've tried so far:

  1. different (if working) USB port
  2. different (if working) controller
  3. different (if working) cables
  4. new batteries
  5. just turn on or off
  6. Download and reinstall the driver
  7. installed different versions of the driver
  8. different operating systems of the driver installed
  9. driver installed in compatibility mode
  10. https://support.Xbox.com/ro-ro/Xbox-360/accessories/connect-wired-controller-computer

  I ran out of things to try.

  I appreciate any help, thanks.

  Hello

  Since then, the problem is with the controller Xbox 360 that I suggest you to send your request to technical support of Xbox forum.
  http://forums.Xbox.com/xbox_early_access/xbox_on_win10_ip/default.aspx

  Hope that this helps, if you need further help please write us back we will be happy to help you.
  Concerning

• I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  Plug it in and let the auto drivers install.  I use mine all the time.

• Need to retrieve the password for Xbox 360 Windows Live ID.

  Original title: password retrieve

  In my xbox 360 windows live ID, I have my password and it was removed, I have to contact microsoft windows but nothing.what do I do?

  Hi ElvisKiekebosch,

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What operating system is installed on the computer?

  ·         You get the error message?

  Try the steps from the following links and see if it helps:

  Error: The e-mail address or the password entered is not valid

  The Windows Live ID management

  The problems of connection to your Xbox LIVE account

  I hope this helps.

• How < I > completely < /i > reinstall a wired controller Xbox 360 on a Windows PC?

  I have a wired Xbox 360 controller, which I use on my PC and my laptop... Who is having trouble on the PC when the Vibration is enabled in games. (Among other problems)

  I read the other post, where the answer is that the bus power supply and motherboard were not powerful enough and is that which is at the origin of the problems, now I'm not saying I wouldn't totally rule this possibility, but I'm pretty confident that my PC must be capable of this (especially if my cell phone).

  I think my problem is to do the installation, because there was a problem during the installation on the PC...

  So that the Xbox 360 controller installed its drivers and what - not the first time I plugged on my PC, my friend offline security "do not pull the Xbox off the shelf" section of wire and an error, but the installation is complete. The controller has the same way as it does on the laptop, for example, the green ring just keeps blinking while on the laptop, he moved to the "Player 1" quarter. However, the feature (buttons and sticks) works well in games, crashing less vibrations.

  To be honest, I don't really care about the vibration and have just disabled in the game options, but I recently bought a game where I can not disable the vibration and so I can not use my controller with it. (sad face). That said, it would be nice to stop the flashing green light several times.

  I tried through Add/Remove programs but do not understand how completely remove everything if I do a fresh install.

  I don't know if there are any software is installed, or elements of the registry or drivers. But I need to remove what it installed so I can reinstall it without error.

  My title should have been no doubt: "How to completely uninstall a wired Xbox 360 controller on a Windows PC" since it is the part of the resettlement of which I have a problem with.

  Can someone help me?

  Thank you! (happy face with slightly concerned Front)

  Hello

  Method 1:

  I suggest you to see link and check if it helps:

  Connect a game controller

  http://support.Xbox.com/en-us/Xbox-360/accessories/connecting-game-controllers

  Method 2:

  See the link and check if it helps:

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  See also the link for Xbox support:

  http://support.Xbox.com/en-us/home

  I also suggest you to report the query in Xbox forums:

  http://forums.Xbox.com/?XR=shellnav

• Unable to get controller Xbox 360 on Run

  Basically, this does not work, and I don't know why. Here are the basics:

  With the rechargeable pack wireless controller

  Windows 8

  Dell Inspiron with 6 GB of RAM and dual core 2.5 GHZ

  Program that runs in Windows 7 compatibility mode

  The controller can be found in devices and printers as "Wireless controller for Xbox 360 with plug-and-play charge kit", but it is not detected by Micro Sofy Xbox 360 accessories. Circle button on the controller has 4 lights flashing instead of one as usual.

  I tried several controllers, and both have the same problem. On one, however, they illuminate the room and charges are red and the other green.

  I tried to reinstall the program.

  Any idea? Don't want to hit twenty clam down at least for a PC controller.

  Hello

  Check with afterglow and technical support Xbox and their forums.

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Issue of controller Xbox 360 (PC connection)

  Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

  Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

• Controller XBOX 360, used for mice

  OK... I just bought the game of the year Elderscrolls oblivion eddition and I bought a XBOX 360 controller to use considering how it is compatible with windows 7... Everything works great with one exception. The right analog stick on the controller is supposed to control the movements of camera but it does nothing, so I have to resort using the mouse which can be quite the pain. How can I set the analog stick right to act like the mouse to control the camera? Its very important and any help will be greatly appreciated.

  I think he was looking for the Oblivion controller settings.

  Try this site and scroll down to Game Pad feature
  http://www.Elderscrolls.com/downloads/updates_patchnotes6.htm

  Good luck!

• The Xbox 360 Windows gamepad work with Windows XP 64 - bit SP2?

  Hey,.

  Ive got sp2 of Windows XP 64-bit.
  Now, I want to buy the Xbox 360 controller for windows.
  In the data sheets for this product, he says of works with XP other than windows xp 64-bit.
  But on the support page, you can download a driver;
  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  Xbox360 AccessoriesSoftware 1.1 64-bit for Windows XP

  This means - it is compatible with Win XP 64-bit after all with all the features?
  THX in advance

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://forums.Xbox.com/

  It will be useful.

• Xbox 360 Windows Media Center Extender does not connect after upgrade to Windows 7

  Xbox 360 Extender worked fine on Vista Home Premium (32 bit). After the upgrade Windows 7 Home Premium (32 bit) on-site, when I turn on Xbox and the attempt to connect to Windows Media Center, you get an error saying unable to connect.

  Back on the Windows 7 PC, I see the mcx1 file it under the users folder. But when I got to the tools, it says no set Extender in place.

  Someone at - it suggestions on how to change settings in Windows 7 while the Xbox can connect?

  Just in case someone encounters this problem, here is what I did:

  1. reboot the Xbox until Windows Media Center connects.
  2. back to the PC. Start Windows Media Center.
  3. go into tasks > settings > Extender
  4. Select Xbox 360 Media Center, then delete.
  5 PC removes the old mcx1 folder used to use with Vista.
  6. start the Xbox, go to Windows Media Center
  7 write down the code on Xbox's 8-digit ' display
  8. on the PC, you will be prompted to set up the Xbox extender
  9 follow the instructions to enter 8 digit code
  10. new file will be created, mcx1-PCNAME.

  You're all set on 7.

• Receiver for wireless controller Xbox 360 to PC does not

  I've had my Xbox 360 controller for at least a year now and so far it has been working perfectly. But yesterday, I decided to visit my brother and took my Xbox controller and the receiver with me. I put them in a bag with a controller leads and additional third-party, got in a car to my brother's House. When I got there, we plugged the receiver to the PC, but the receiver does not light. In fact, the computer does even not recognize that a new device has been connected. The next day, I plugged it to my computer for the first time after leaving the House of my brother and it did not work this time either.

  Here is what I tried:

  • I tried all the USB ports available and may conclude that they have nothing to do with the problem. All ports operate as it should.
  • I tried on a total of 3 computers, and none of them recognize be plugged.
  • I uninstalled and reinstalled programs Microsoft Xbox 360 accessories nothing helps.

  In addition, my computer does not recognize an unidentified device, but I don't think that it has nothing to do with the problem at hand. I say this because, in an attempt to solve this problem, I thought it was the cause of it and followed guides to fix. None of them worked, but I did one discovered that when I uninstalled the driver and rebooted the computer: at the time of the restart, I didn't have the receiver plugged, but he always found an unidentified aircraft. This leads me to believe that the unidentified device is not the receiver, but something else entirely (I don't know what this could be good). However, I'm not a genius when it comes to computers, so I could be wrong.

  As three different computers don't recognize even not be plugged in, I suspect the receiver itself may have been damaged when I put the bag with the controllers and the receiver down in the car and refused to work because of this. However, before you start investing money on two new controllers/receivers/alternatives, I want to ask if there are solutions to the problem.

  Hi and thanks for the answer.

  However, additional speculation in recent days, I managed to find the problem. I peeked inside the receiver and discovered that, as I expected, some had been damaged which prevents operation of the receiver. Since then, I made some adjustments and got the spare parts and the receiver and the controller now working again.

  Nevertheless, thank you for help. In the event of more problems with the controller, I'll be sure to have a look at these links.

• Problems connecting a controller Xbox 360 to PC Vista

  I have problems with the connection and install it. I downloaded the program it appears on the help page, but my computer does not recognize the controller as being a game controller. Perhaps, I downloaded the drivers hurt or something. Please any help would be greatly appreciated.

  Hi guys here is the link for the driver for vista 32 bit http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=Gaming&type=Gaming&name=C8G-00004&os=WVista_32&lang=en it could be useful