My Nano 4th gen battery is dead, is this the end?

My battery Nano 4th Gen does not load, is this the end?

This repair guide shows how to replace the battery

https://www.iFixit.com/Guide/iPod+nano+4th+generation+battery+replacement/1161

For an iPod nano, the challenge is to weld.  There may be electronics independent garages in your area familiar with Apple.  Apple repair service support for older products is described in this document

Vintage and obsolete products - Apple Support

The room itself is available online, from the usual sources such as eBay and Amazon.

Tags: iPod

Similar Questions

  • iPod Nano 4th generation - battery problem

    Hello

    I have an iPod Nano 4th generation and I love it. But recently, I see that the backup battery is very poor (difficult to get 2-3 hours of continuous music playing). I went to the service center, but unfortunately, they say that there is no possibility to replace the battery or iPod, even if I'm ready for the paid service, because the warranty is void

    The only option left for me is to use it until it works (until the battery is completely dead) and then throw it away. Y at - it any other option left, I'm not aware of.

    Kind regards

    Girish

    If you do a search on the Internet for the independent repair companies in your area, you can find one knowing well Apple that will make the replacement of the battery.  In this case, the technician didn't need to be "certified" officially by Apple because it is not a warranty repair.  Technology needs of having an experience.

    You can do it yourself, if you are technically inclined.  This web site has repair guides

    https://www.iFixit.com/device/iPod_Nano_4th_Generation

    and third spare batteries are available on eBay and other online sellers.

  • No response from my ipod don't shuffle 4th Gen, no power, no recognition of the computer

    Hi all

    I've seen several similar posts on communities, but I tried everything I could see, but could not solve my problem.

    My shuffle is not lit, it may not be recognized by my iMac when it is connected and it shows no light.

    I've tried several things:

    1. reset (several times) by turning off for 10 seconds, then on again.

    2. load via wall charger for an hour... still nothing

    3. apparently, someone said that we could plug it in and out of the charger until it has enough power to kick start something where my battery is completely discharged. I tried too much for about 5 minutes, still don't see no signs of all the lights.

    4. I tried 2 original ipod shuffle strings and 2 also bought Internet, no difference. And Yes, they are pushed inside.

    Is there anything else I can try before giving up? Mine is a little over a year, so is no longer under warranty.

    Thank you all very much

    Kind regards

    Simon

    Looks like you have tried many things.  Even if the battery is dead, you should get a reaction (like a red light) when it is connected.  It could be the USB cable, but you have tried two Apple.  The "made from the Internet" can be suspicious - they might be for the shuffle gen 2, which has a different connector and would not work with 4th gen shuffle.  You tried to load a USB power adapter, so the problem isn't a bad USB port on the Mac.

    My guess is a problem with the headphone jack on the shuffle. It does not have a power supply.  Or it could be a defect on the logic board.  If you have an Apple Store nearby, you can make an appointment with the store Genius Bar (tech support staff), even if it is out of warranty.

  • 4th gen play multi audio stream at the sametime.

    Hello

    I have a weird problem with the video which was remuxed with ffmpeg which have both 2 channel and ac3 aac streams 6 channels being played at the same time, it's a common problem?

    Video playback on other devices as expected, i.e. play only a single stream.

    Welcome to the Apple community.

    I suspect that they are simply coded incorrectly, I have no issue with the compressor.

  • Can't play music bought on the cloud on Apple TV (4th gen)

    I just started to use the Apple's music, and when I go to my music on my MacBook Air and iPhone/iPad, I can play anything I added whether through Apple music, music purchased from the iTunes Store or my own music that corresponded via iCloud music library.

    On my Apple TV (4th gen), however, I can't play the purchased songs. Apple and my own songs music songs play fine. But if I choose one of the purchased albums, the screen does is display the album artwork for every song Flash by very quickly, but does not play anything.

    Someone knows how to fix this or if this is a known bug?

    Thank you!

    You can try to reboot the device, and then disconnect the store and insert it again.

    TT2

  • IPod Nano 4th generation: cannot restore

    I can't restore my Ipod Nano 4th generation on iTunes. I downloaded the latest version of iTunes 11, my computer reads the Nano and iTunes, but iTunes message arrives that the iPod software update server could not be contacted! Have tried 3 days! My Ipod is in recovery mode, so I get no display.

    Hi Elaine,.

    I suggest you to contact the Apple support about the issue that you are facing.

    https://discussions.Apple.com/index.jspa

    For more information related to Windows, feel free to post. We will be happy to help you.

  • Apple TV 4th gen junk? -The distance dead and menu in Chinese/Korean

    So I bought 64GB 4th gen Apple TV for the family as a Christmas gift.  A lot of excitement, right.  You can imagine the scene.  I followed the directions and the plug, it and pops up a menu in Chinese or Korean.  OK, I think I can work my way through it at random and change the language... but the remote does nothing.  I tried not matching and re-twinning of the remote control and I get any flashing lights on the Apple TV device.  I have reset all mutiple times and I tried a bluetooth connection with my iPhone but not the bluetooth option still appears on my phone.  Apple TV is 4th gen junk?

    Take it back to Apple for testing or from another unit.

  • apple 4th gen tv does not work

    I plugged in the 4th gen apple tv and the first screen comes up with the Chinese writing and a picture of the remote control. the remote pictogram shows swiping down. e-e distance responds to nothing. It looks like this in a Chinese menu but cannot read Chinese, and nothing happens. help please

    Sounds like the menu remote synchronization and the battery being dead in the remote control.  Try reloading the remote: load your Siri remote or Apple TV Remote - Apple Support

    Note that you use the provided cable and a USB charger, or a USB port.

    Note also you can try and use the remote control that plugged while and do not need to wait three hours to fully charge.

  • That means a green light flashing on iPod Shuffle 4th Gen?

    When you listen to songs on my iPod Shuffle 4th gen, the LED flashes green (connected to the helmet, not the USB port on the computer).  I thought it was supposed to stay green. What does a flashing green light?  Thank you.

    When you play the shuffle, the light usually indicates the level of battery charge.  Green , fresh strong (I think that more than 25%).  He goes to the orangeand then Red (reduced rate).  While playing songs, he should not stay ON or flashes continuously, unless you press the control buttons.

  • How can I restart the Apple TV Remote (4th Gen)

    Hi all

    I have a relatively new Apple TV (4th Gen) and tonight after a few weeks of work perfectly, the remote control slide to the right and in other directions only intermittently. I read up before you call Apple and it seems to me that it is a new issue. Here my question is it possible to restart the remote where the little glitches occur. A poster suggested battery, it looks like there must be a pressure button to reset the remote control, if you know of one, please post. I'll try next, logout and re-pairing to see what is happening, and then from there head to the store tomorrow.

    Any ideas appreciated.

    So I solved the problem by restarting the Apple TV itself, and now the remote works again. Also amazing that my iPhone was working very well as a remote control before the reboot, so don't know why this Apple TV restarting fixed but there.

  • HP Envy 4th gen: graphics card

    I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. Is it possible to insert a graphics card on this laptop. Can I extend 9-cell 6 cell battery. If you use an integrated graphics card then why would they give slot for graphics card?
    Details as follows
    Model No 15-j053cl
    Thank you.

    sikeya wrote:
    I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. ....

    Hello

    Where do you find the above information? The following link shows its specifications:

    http://support.HP.com/us-en/document/c03754263

    The 'Intel HD graphics 4400' chip is soldered to the mother/system board and replace that means buy a new computer.

    Kind regards.

  • Why is apple tv (4th Gen) using subnet different comcast

    I need to figure out if there is anything special/different regaurding how ATV (4th Gen) made the resolution DNS when wired to a Comcast cable modem only (no wifi and no router)?  I notice that my ATV selects a different subnet when ATV is set automatically resolve IP and DNS.  Example of my Dell PC Tower and Sony laptop automatically use a subnet of 255.255.255.0, but ATV uses the example below:

    67.166.208.26

    255.255.252.0

    router 67.166.208.1

    ATV works great just need to know why to solve network problems not related to my home office network and at home?

    Hello. You say there is no router, but I guess that the Comcast modem is also a router and DHCP server. Are you using IPv6? You use a static IP address?

  • Can I charge my iPod Shuffle 4th Gen with a wall charger or do I need to use a computer?

    Can I charge my iPod Shuffle 4th Gen with a wall charger or do I need to use a computer?

    You can use a wall charger. The following, for example, shows in the section compatibility as being compatible with the iPod Shuffle 4th generation: http://www.apple.com/shop/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=0a8 96cef6682809aaf80e8c3741f09ed6d7df9585e7fc21bb39381e2a99a7f56b6f149e5ab72d8416a9 bfa670e36cc43168558b8b8c033b881948c1230b7156cbe51af44f7fd2b9ab533d7cb453e844ccd1 80b8e71aa7359ff2698b40de39b3b

    The foregoing generally comes with iPhones, but if you have a charger which comes with an iPad, which can also be used with the Shuffle: http://www.apple.com/shop/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=0a 896cef6682809aaf80e8c3741f09ed6d7df9585e7fc21bb39381e2a99a7f56b6f149e5ab72d8416a 9bfa670e36cc43168558b8b8c033b881948c1230b7156cbe51af44f7fd2b9ab533d7cb453e844ccd 180b8e71aa7359ff2698b40de39b3b

  • 4th gen Apple TV cannot pair with iphone remote app

    Click on 'Add Apple TV' selected on TV, then was invited to enter the 4 numbers matching password shown on television. However the TV shows 4 blocks of gray rectangle instead of 4 digits.

    I also checked that the apple TV and iphone are on the last OS update. What gives? This app is supposed to work with 4th gen now.

    Yes, it works. This looks like some weird glitch. Using the new application ATV 4 remote control (black), or the older version, now called iTunes remotely? Try restarting the ATV using the settings > system > restart. Then try to pair it again.

  • Apple TV 4th Gen won't play videos

    Apple TV won't play movies at home since I've updated for TV OS 10.0. Before the update has never had a problem streaming the content of my iMac on the Apple TV. I have no problems of dissemination of content on the internet.

    Equipment:

    Apple TV 4th Gen - TV OS 10.0

    Time Capsule from Apple c. 7.7.7

    iMac - OS X El Captain v. 10.11.6

    iTunes v. 12.5.1

    Restart all the facilities, I had the same problem yesterday

Maybe you are looking for

  • Lenovo - LSB - R2 Windows Server 2012 Service bridge

    I am trying to get it to install on my server. Here is my log file. The following properties have been defined:Property: [AdminUser] = true {boolean}Property: [InstallMode] = {string} HomeSiteProperty: [NTProductType] = 3 {int}Property: [ProcessorArc

  • Sintonizador radio

    Hello someone can help me are in Quebec no I can hear radio el mi windows player tells me that no tengo UN sintosador don't radio como hago donde lo descargo y como lo instalo not is los pasos a seguir diganme como gracias mi correo * address email i

  • Windows Update 8.1 - now my LaserJet P1005 printer will not work (AGAIN!)

    I have a HP laserjet P1005 printer, whose yeaterday was work happliy in window 8. I downloaded 8.1 last night and the printer no longer works! With the window of printer status open (through the control panal windows) the details of the document are

  • Port security and DHCP

    Hi all. I have configured the port security in some ports, and I don't think it handles images as it should. the following settings are -max: adds the correct number of MAC -permanent safe mode -throw I connect the legitimate devices to determine the

  • NET user commmand

    I used the command "net user and password for PYTHON" where PYHON is my user name. After that, even if I'm in the right password I am uable to login.can someone please tell me what to do so that I am able to connect again